Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/as3525/clock-target.h
Rafaël Carré 12af2926e5 Make Clip+ bootloader build 
Now making the Fuzev2 bootloader build should be pretty easy

TODO:
    - write button driver (FlynDice found all buttons already)
    - find button light
    - decide if lcd-ssd1303.c must be modified for Clip+ using SSP or forked
    - check if backlight code works (I copied Clipv2 code)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24520 a1c6a512-1295-4272-9138-f99709370657
2010-02-05 12:40:25 +00:00

194 lines
8.4 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright © 2008 Rafaël Carré
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef CLOCK_TARGET_H
#define CLOCK_TARGET_H
/* returns clock divider, given maximal target frequency and clock reference */
#define CLK_DIV(ref, target) ((ref + target - 1) / target)
/* Frequency and Bus Settings
* These bus settings work on the assumption that unboosted performance will be
* based on fastbus mode(FCLK == PCLK) at a frequency configured with this file.
* Boosted performance defaults to synchronous bus but will be changed to
* asynchronous bus if FCLK is not an integer multiple of PCLK.
* The player starts up in fastbus mode and synchronous or asynchronous mode is
* implemented in the set_cpu_frequency() function in system-as3525.c. There
* are limitations on both frequencies and frequency relationships listed in 7.3.14
* of the as3525 datasheet that need to be observed. If you are determined to
* use a frequency that is not "legal" you can do that. There are no checks for
* legal frequency values, only some validity checks to make sure the divider
* value fits into the number of bits allotted to it.
*
* The CLOCK_DIV macro does a pretty good job at selecting divider values but
* you can always override it by choosing your own value and commenting out the
* macro. AS3525_FCLK_PREDIV values other than 0 allow you to choose frequencies
* from lines below the main PLL frequency lines. AS3525_FCLK_POSTDIV
* will be calculated automagically depending on the value you have selected
* for AS3525_FCLK_FREQ. You may add more PLL frequencies by simply commenting
* out the current #defines for AS3525_PLLA_FREQ & AS3525_PLLA_SETTING and
* adding a #define for FREQ and divider setting to produce that frequency.I
* have included USB & PLLB for future use but commented them out for now.
*/
/* Clock Sources */
#define AS3525_CLK_MAIN 0
#define AS3525_CLK_PLLA 1
#define AS3525_CLK_PLLB 2
#define AS3525_CLK_FCLK 3 /* Available as PCLK input only */
/** ************ Change these to reconfigure clocking scheme *******************/
#if CONFIG_CPU == AS3525v2
/* PLL* registers differ from AS3525 */
#define AS3525_PLLA_FREQ 240000000
#else
/* PLL frequencies and settings*/
#define AS3525_PLLA_FREQ 248000000 /*124,82.7,62,49.6,41.3,35.4 */
/* FCLK_PREDIV-> *7/8 = 217MHz 108.5 ,72.3, 54.25, 43.4, 36.17 */
/* *6/8 = 186MHz 93, 62, 46.5, 37.2 */
/* *5/8 = 155MHz 77.5, 51.67, 38.75 */
#define AS3525_PLLA_SETTING 0x261F
/* PLLB frequencies and settings (audio and USB) */
#define AS3525_PLLB_FREQ 384000000 /* allows 44.1kHz with 0.04% error*/
#define AS3525_PLLB_SETTING 0x2630
#endif /* CONFIG_CPU == AS3525v2 */
//#define AS3525_PLLA_FREQ 384000000 /*192,128,96,76.8,64,54.9,48,42.7,38.4*/
/* FCLK_PREDIV-> *7/8 = 336MHz 168, 112, 84, 67.2, 56, 48, 42, 37.3*/
/* *6/8 = 288MHz 144, 96, 72, 57.6, 48, 41.1, */
/* *5/8 = 240MHz 120, 80, 60, 48, 40 */
//#define AS3525_PLLA_SETTING 0x2630
/* PLLB not used at this time! */
//#define AS3525_PLLB_FREQ
//#define AS3525_PLLB_SETTING
#define AS3525_FCLK_PREDIV 0 /* div = (8-n)/8 Enter manually & postdiv will be calculated*/
/* 0 gives you the PLLA 1st line choices, 1 the 2nd line etc. */
#define AS3525_FCLK_FREQ 248000000 /* Boosted FCLK frequency */
#define AS3525_DRAM_FREQ 62000000 /* Initial DRAM frequency */
/* AS3525_PCLK_FREQ != AS3525_DRAM_FREQ/1 will boot to white lcd screen */
#define AS3525_PCLK_FREQ AS3525_DRAM_FREQ/1 /* PCLK divided from DRAM freq */
#define AS3525_DBOP_FREQ AS3525_PCLK_FREQ/1 /* DBOP divided from PCLK freq */
/** ****************************************************************************/
/* Figure out if we need to use asynchronous bus */
#if (AS3525_FCLK_FREQ % AS3525_PCLK_FREQ)
#define ASYNCHRONOUS_BUS /* Boosted mode asynchronous */
#endif
/* Tell the software what frequencies we're running */
#define CPUFREQ_MAX AS3525_FCLK_FREQ
#define CPUFREQ_DEFAULT AS3525_PCLK_FREQ
#define CPUFREQ_NORMAL AS3525_PCLK_FREQ
/* FCLK */
#define AS3525_FCLK_SEL AS3525_CLK_PLLA
#define AS3525_FCLK_POSTDIV (CLK_DIV((AS3525_PLLA_FREQ*(8-AS3525_FCLK_PREDIV)/8), AS3525_FCLK_FREQ) - 1) /*div=1/(n+1)*/
/* MCLK */
#define AS3525_MCLK_SEL AS3525_CLK_PLLA
#if (AS3525_MCLK_SEL==AS3525_CLK_PLLA)
#define AS3525_MCLK_FREQ AS3525_PLLA_FREQ
#elif (AS3525_MCLK_SEL==AS3525_CLK_PLLB)
#define AS3525_MCLK_FREQ AS3525_PLLB_FREQ
#else
#error Choose either PLLA or PLLB for MCLK!
#endif
/* PCLK */
#ifdef ASYNCHRONOUS_BUS
#define AS3525_PCLK_SEL AS3525_CLK_PLLA /* PLLA input for asynchronous */
#define AS3525_PCLK_DIV0 (CLK_DIV(AS3525_PLLA_FREQ, AS3525_DRAM_FREQ) - 1)/*div=1/(n+1)*/
#else
#define AS3525_PCLK_SEL AS3525_CLK_FCLK /* Fclk input for synchronous */
#define AS3525_PCLK_DIV0 (CLK_DIV(AS3525_FCLK_FREQ, AS3525_DRAM_FREQ) - 1) /*div=1/(n+1)*/
#endif
/*unable to use AS3525_PCLK_DIV1 != 0 successfuly so far*/
#define AS3525_PCLK_DIV1 (CLK_DIV(AS3525_DRAM_FREQ, AS3525_PCLK_FREQ) - 1)/* div = 1/(n+1)*/
/* PCLK as Source */
#define AS3525_DBOP_DIV (CLK_DIV(AS3525_PCLK_FREQ, AS3525_DBOP_FREQ) - 1) /*div=1/(n+1)*/
#define AS3525_I2C_PRESCALER CLK_DIV(AS3525_PCLK_FREQ, AS3525_I2C_FREQ)
#define AS3525_I2C_FREQ 400000
#define AS3525_SD_IDENT_DIV ((CLK_DIV(AS3525_PCLK_FREQ, AS3525_SD_IDENT_FREQ) / 2) - 1)
#define AS3525_SD_IDENT_FREQ 400000 /* must be between 100 & 400 kHz */
#define AS3525_IDE_SEL AS3525_CLK_PLLA /* Input Source */
#define AS3525_IDE_DIV (CLK_DIV(AS3525_PLLA_FREQ, AS3525_IDE_FREQ) - 1)/*div=1/(n+1)*/
#if CONFIG_CPU == AS3525v2
#define AS3525_MS_FREQ 120000000
#define AS3525_IDE_FREQ 80000000
#else
#define AS3525_IDE_FREQ 50000000 /* The OF uses 66MHz maximal freq */
#endif /* CONFIG_CPU == AS3525v2 */
//#define AS3525_USB_SEL AS3525_CLK_PLLA /* Input Source */
//#define AS3525_USB_DIV /* div = 1/(n=0?1:2n)*/
/* Validity Checks */
/* AS3525_PCLK_FREQ */
#if (CLK_DIV(AS3525_PLLA_FREQ, AS3525_PCLK_FREQ) - 1) >= (1<<4) /* 4 bits */
#error PCLK frequency is too low : clock divider will not fit !
#endif
/* AS3525_DBOP_FREQ */
#if (CLK_DIV(AS3525_PCLK_FREQ, AS3525_DBOP_FREQ) - 1) >= (1<<3) /* 3 bits */
#error DBOP frequency is too low : clock divider will not fit !
#endif
/* AS3525_IDE_FREQ */
#if (CLK_DIV(AS3525_PLLA_FREQ, AS3525_IDE_FREQ) - 1) >= (1<<4) /* 4 bits */
#error IDE frequency is too low : clock divider will not fit !
#endif
/* AS3525_I2C_FREQ */
#if (CLK_DIV(AS3525_PCLK_FREQ, AS3525_I2C_FREQ)) >= (1<<10) /* 2+8 bits */
#error I2C frequency is too low : clock divider will not fit !
#endif
/* AS3525_SD_IDENT_FREQ */
#if ((CLK_DIV(AS3525_PCLK_FREQ, AS3525_SD_IDENT_FREQ) / 2) - 1) >= (1<<8) /* 8 bits */
#error SD IDENTIFICATION frequency is too low : clock divider will not fit !
#endif
/* I2SIN / I2SOUT frequencies */
/* low samplerate */
#if ((AS3525_MCLK_FREQ/(128*8000))) > 512 /* 8kHz = lowest frequency */
#error AS3525_MCLK_FREQ is too high for 8kHz samplerate !
#endif
/* high samplerate */
#if ((AS3525_MCLK_FREQ/(128*96000))) < 1 /* 96kHz = highest frequency */
#error AS3525_MCLK_FREQ is too low for 96kHz samplerate !
#endif
#endif /* CLOCK_TARGET_H */
Reference in a new issue View git blame Copy permalink