| .. |
|
sansa-c200v2
|
Remove vim option line
|
2010-04-07 03:27:23 +00:00 |
|
sansa-clip
|
lcd-ssd1303 (all Clips) : move model specific code in their own files
|
2010-03-19 15:13:29 +00:00 |
|
sansa-clipplus
|
Clip+: remove button_hold() : we use software hold
|
2010-04-01 17:24:14 +00:00 |
|
sansa-clipv2
|
Clipv2: read hold switch correctly
|
2010-04-03 22:33:47 +00:00 |
|
sansa-e200v2
|
Fix yellow. Another function unneeded in the bootloader.
|
2010-04-05 12:23:30 +00:00 |
|
sansa-fuze
|
as2525(v2): We don't need yuv blitting/greylib support in the bootloader so don't compile it.
|
2010-04-05 12:17:11 +00:00 |
|
sansa-fuzev2
|
as2525(v2): We don't need yuv blitting/greylib support in the bootloader so don't compile it.
|
2010-04-05 12:17:11 +00:00 |
|
sansa-m200v4
|
Sansa Clip & m200v4 : calls backlight_hold_changed() when hold button is toggled
|
2009-08-15 15:02:51 +00:00 |
|
adc-target.h
|
|
|
|
app.lds
|
Revert unrelated part of r25491 : fuzev1 init code works again
|
2010-04-06 10:21:58 +00:00 |
|
ascodec-as3525.c
|
Remove vim option line
|
2010-04-07 03:27:23 +00:00 |
|
ascodec-target.h
|
as3525v2: disable interrupts when writing to the PMU registers
|
2010-04-03 04:42:04 +00:00 |
|
audio-as3525.c
|
fuzev2 FM doesn't work (yet), don't try to record from it
|
2010-03-29 23:10:00 +00:00 |
|
backlight-e200v2-fuze.c
|
FS#10306 by Thomas Martitz : button light doesn't change on SD transfers on Sansa AMS (Fuze & e200v2)
|
2009-06-18 22:33:02 +00:00 |
|
boot.lds
|
Fix a bunch of boot.lds files so that they build with newer ld. The stack/bss sections need NOLOAD. otherwise the linker would try to include those into the binary. I don't know why this ever worked with our current ld version.
|
2010-03-08 23:16:57 +00:00 |
|
button-e200v2-fuze.c
|
Fuzev2: Scrollwheel works like a charm :)
|
2010-04-01 16:07:56 +00:00 |
|
clock-target.h
|
Revert part of r25489 as it didn't fix the problem, that the CPU frequency debug screen shows the wrong frequency after boot, properly.
|
2010-04-05 19:20:56 +00:00 |
|
dbop-as3525.c
|
Fuzev2: Reduce code duplication by reusing Fuzev1 code.
|
2010-04-05 12:01:44 +00:00 |
|
dbop-as3525.h
|
Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now).
|
2010-01-07 22:21:41 +00:00 |
|
debug-as3525.c
|
Detect C200v2 variant by reading A7, use A5 or A7 to control backlight and buttonlight depending on the result.
|
2010-04-06 18:32:47 +00:00 |
|
debug-target.h
|
|
|
|
dma-pl081.c
|
Sansa AMSv2: Do not disable DMA synchronization logic for as3525v2. The DMA controller and the SD controller run at different clock speeds.
|
2010-04-08 06:12:51 +00:00 |
|
dma-target.h
|
Add DMA line for SSP as used in Clip+
|
2010-02-08 08:13:52 +00:00 |
|
fmradio-i2c-as3525.c
|
Clip+: si4702 FM
|
2010-03-15 00:36:13 +00:00 |
|
i2s-as3525.c
|
|
|
|
kernel-as3525.c
|
Fuzev2: Scrollwheel works like a charm :)
|
2010-04-01 16:07:56 +00:00 |
|
lcd-as-e200v2-fuze-fuzev2.S
|
Add forgotten file (git was supposed to rename!).
|
2010-04-05 12:02:56 +00:00 |
|
lcd-ssd1303.c
|
as2525(v2): We don't need yuv blitting/greylib support in the bootloader so don't compile it.
|
2010-04-05 12:17:11 +00:00 |
|
pcm-as3525.c
|
Sansa AMS: allow use of PLL B for more accurate audio sample rate (0.04% instead 0.15% error)
|
2010-01-10 14:24:45 +00:00 |
|
power-as3525.c
|
Sansa AMS: do not pretend we can power off the tuner
|
2010-03-05 01:43:47 +00:00 |
|
powermgmt-as3525.c
|
Use a real battery discharge curve for calibration data
|
2010-04-08 18:50:29 +00:00 |
|
powermgmt-target.h
|
Clipv2/Clip+ : use CHG_IN adc channel, it seems to work better than BVDD and RTCSUP
|
2010-03-31 01:22:23 +00:00 |
|
scrollwheel-as3525.c
|
Fix someone elses yellow and red
|
2010-04-02 01:41:51 +00:00 |
|
sd-as3525.c
|
sd-as3525: do not reverse 2 times long responses, read them directly in the needed order
|
2010-03-14 21:46:25 +00:00 |
|
sd-as3525v2.c
|
sd-as3525v2: Start out with all MCI Interrupts masked.
|
2010-04-08 06:12:44 +00:00 |
|
system-as3525.c
|
Detect C200v2 variant by reading A7, use A5 or A7 to control backlight and buttonlight depending on the result.
|
2010-04-06 18:32:47 +00:00 |
|
system-target.h
|
Detect C200v2 variant by reading A7, use A5 or A7 to control backlight and buttonlight depending on the result.
|
2010-04-06 18:32:47 +00:00 |
|
timer-as3525.c
|
Sansa AMS: VIC_INT_ENABLE register is not a mask
|
2009-11-24 12:05:53 +00:00 |
|
usb-as3525.c
|
Clipv2: reboot to OF when USB is inserted
|
2010-04-03 05:45:44 +00:00 |
|
usb-drv-as3525.c
|
Clip+: enable sound on "as3514" (as3543 in fact)
|
2010-03-20 17:09:44 +00:00 |
|
usb-target.h
|
Limit AUDIO_IRQ handling to AS3525, since it doesn't work on the newer SoC in SANSA_CLIPPLUS yet.
|
2010-03-23 11:13:17 +00:00 |
12a6ef5c18