rockbox/firmware/target/arm/as3525/sansa-clip/lcd-clip.c
Bertrik Sikken 0dcae7402f Sansa as3525: Add missing lcd-clip.h header file to sansa clip lcd drivers. Set svn:keywords on scrollwheel-as3525.c.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25674 a1c6a512-1295-4272-9138-f99709370657
2010-04-18 16:58:33 +00:00

90 lines
2.5 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2008 François Dinel
* Copyright (C) 2008-2009 Rafaël Carré
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "lcd.h"
#include "lcd-clip.h"
#include "system.h"
#include "cpu.h"
void lcd_hw_init(void)
{
/* DBOP initialisation, do what OF does */
CGU_DBOP = (1<<3) | AS3525_DBOP_DIV;
GPIOB_AFSEL = 0x08; /* DBOP on pin 3 */
GPIOC_AFSEL = 0x0f; /* DBOP on pins 3:0 */
DBOP_CTRL = 0x51008;
DBOP_TIMPOL_01 = 0x6E167;
DBOP_TIMPOL_23 = 0xA167E06F;
GPIOA_DIR |= 0x33; /* pins 5:4 and 1:0 out */
GPIOB_DIR |= 0x40; /* pin 6 out */
GPIOA_PIN(1) = (1<<1);
GPIOA_PIN(0) = (1<<0);
GPIOA_PIN(4) = 0;
GPIOB_PIN(6) = (1<<6);
}
#define LCD_DELAY 1
void lcd_write_command(int byte)
{
volatile int i = 0;
while(i<LCD_DELAY) i++;
/* unset D/C# (data or command) */
GPIOA_PIN(5) = 0;
/* Write command */
/* Only bits 15:12 and 3:0 of DBOP_DOUT are meaningful */
DBOP_DOUT = (byte << 8) | byte;
/* While push fifo is not empty */
while ((DBOP_STAT & (1<<10)) == 0)
;
}
void lcd_write_data(const fb_data* p_bytes, int count)
{
volatile int i = 0;
while(i<LCD_DELAY) i++;
/* set D/C# (data or command) */
GPIOA_PIN(5) = (1<<5);
while (count--)
{
/* Write pixels */
/* Only bits 15:12 and 3:0 of DBOP_DOUT are meaningful */
DBOP_DOUT = (*p_bytes << 8) | *p_bytes;
p_bytes++; /* next packed pixels */
/* Wait if push fifo is full */
while ((DBOP_STAT & (1<<6)) != 0);
}
/* While push fifo is not empty */
while ((DBOP_STAT & (1<<10)) == 0);
}