| .. |
|
adc.h
|
move the iriver h1x0/h3x0 targets to the target tree
|
2006-10-30 08:56:06 +00:00 |
|
ata.h
|
|
|
|
ata_idle_notify.h
|
adds ata_idle_notify system which allows callbacks in apps/ to be called
|
2006-11-06 14:24:18 +00:00 |
|
ata_mmc.h
|
Ondio: Fix multivolume and hotswap for the old MMC clock circuit.
|
2005-05-22 00:42:00 +00:00 |
|
audio.h
|
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
|
2006-11-06 18:07:30 +00:00 |
|
backlight.h
|
Added remote backlight on hold option to players with remote hold switch. Disabled IRQs while reading pcf50606 ADC. This seems to have stopped buttons becoming unresponsive when using remote. Maybe fixes other button glitches as well?
|
2006-09-10 02:00:40 +00:00 |
|
bidi.h
|
|
|
|
bitswap.h
|
|
|
|
buffer.h
|
|
|
|
button.h
|
woops, removed a bit too much
|
2006-10-30 09:30:21 +00:00 |
|
config-e200.h
|
Correct LCD pixel format on Sansa E200
|
2006-10-26 20:01:04 +00:00 |
|
config-fmrecorder.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-gigabeat.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-gmini120.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-gminisp.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-h10.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-h10_5gb.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-h100.h
|
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
|
2006-11-06 18:07:30 +00:00 |
|
config-h120.h
|
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
|
2006-11-06 18:07:30 +00:00 |
|
config-h300.h
|
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
|
2006-11-06 18:07:30 +00:00 |
|
config-iaudiox5.h
|
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
|
2006-11-06 18:07:30 +00:00 |
|
config-ifp7xx.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-ipod3g.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-ipod4g.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-ipodcolor.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-ipodmini.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-ipodmini2g.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-ipodnano.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-ipodvideo.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-ondiofm.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-ondiosp.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-player.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-recorder.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-recorderv2.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-tpj1022.h
|
Initial commit of work for port to the Tatung Elio TPJ-1022 - yet another PortalPlayer PP5020 target.
|
2006-08-31 19:19:35 +00:00 |
|
config.h
|
General: changed local adc to voltage conversions in several places to use battery_voltage. Added battery_read_info function for unfiltered battery information. x5: removed adc_read as a distinct function. Removed adc tick task. adc_init is empty inline. Adjusted battery scale, voltage to level array and read 10 bits from the ADC for battery since 255 levels is not enough for true centivolt resolution.
|
2006-10-30 11:33:38 +00:00 |
|
cpu.h
|
added mostly dummy changes to allow building of a Sansa e200 bootloader
|
2006-08-01 22:28:14 +00:00 |
|
debug.h
|
|
|
|
disk.h
|
|
|
|
eeprom_24cxx.h
|
eeprom driver for the h3x0 series, cleaned up the h1x0 series driver a bit, added debug entry for h3x0 that allows to write to the eeprom
|
2006-08-15 22:54:06 +00:00 |
|
eeprom_settings.h
|
Bootloader support to search firmware also from flash. Bootloader <->
|
2006-08-09 12:04:13 +00:00 |
|
enc_base.h
|
Forgot to use cvs add on a few new files in the fresh checkout I used. woops.
|
2006-11-06 18:18:05 +00:00 |
|
fat.h
|
Applied FS# 5736 by Alexander Levin.
|
2006-07-31 22:59:45 +00:00 |
|
fmradio.h
|
Added FS#2939 Encoder Codec Interface + Codecs by Antonius Hellmann with additional FM Recording support and my modifications
|
2006-08-28 22:38:41 +00:00 |
|
fmradio_i2c.h
|
Patch #5347 by Rani Hod - Adds FM radio and recording features to the iAudio X5.
|
2006-07-21 08:42:28 +00:00 |
|
font.h
|
|
|
|
gdb_api.h
|
|
|
|
general.h
|
Forgot to use cvs add on a few new files in the fresh checkout I used. woops.
|
2006-11-06 18:18:05 +00:00 |
|
generic_i2c.h
|
|
|
|
hangul.h
|
|
|
|
hwcompat.h
|
|
|
|
i2c-coldfire.h
|
Patch #5347 by Rani Hod - Adds FM radio and recording features to the iAudio X5.
|
2006-07-21 08:42:28 +00:00 |
|
i2c-pp5002.h
|
Renamed the ipod_i2c functions to the more appropriate pp_i2c
|
2006-10-27 11:24:23 +00:00 |
|
i2c-pp5020.h
|
Renamed the ipod_i2c functions to the more appropriate pp_i2c
|
2006-10-27 11:24:23 +00:00 |
|
i2c.h
|
Move publicly (from apps) accessed files from drivers/ to export/.
|
2003-02-07 10:08:02 +00:00 |
|
id3.h
|
AIFF is not (yet) a supported format on HWCODEC targets.
|
2006-11-06 19:49:05 +00:00 |
|
isp1362.h
|
H300: Rudimentary driver for the ISP1362 USB on-the-go controller. For now it just sends the chip to sleep, solving the poor battery runtime issue.
|
2006-06-16 17:34:18 +00:00 |
|
kernel.h
|
Patch #6052 - More responsive skip on Archos
|
2006-10-19 11:43:13 +00:00 |
|
lcd-player-charset.h
|
|
|
|
lcd-remote.h
|
Removed remnants of deprecated lcd_roll().
|
2006-10-31 19:49:35 +00:00 |
|
lcd.h
|
Removed remnants of deprecated lcd_roll().
|
2006-10-31 19:49:35 +00:00 |
|
led.h
|
|
|
|
logf.h
|
|
|
|
m5636.h
|
Patch #5639 by Ulrich Pegelow, inits the M5636 USBOTG chip on the X5 to reduce the battery consumption.
|
2006-07-13 07:40:30 +00:00 |
|
mas.h
|
|
|
|
mcf5249.h
|
H300: (1) Use DMA for LCD updates, with auto-aligned line reads. Speeds up LCD updates by ~ 75% at 11MHz and 45MHz. Only ~ 11% speedup at 124MHz due to (2). (2) Less aggressive LCD transfer timing at 124MHz. With the previous timing, slightly corrupted display contents was reported, and with DMA transfers at least 4 waitstates are needed to make updates work at all. * A table in system-iriver.c shows settings for all integer multiples of the base clock frequency (info for developers, not yet complete).
|
2006-11-02 20:50:50 +00:00 |
|
mcf5250.h
|
|
|
|
mp3_playback.h
|
|
|
|
mp3data.h
|
Archos recording/playback: (1) Xing header creation: * Now estimates the framecount from the recording time if the MAS frame counter saturates, so it always writes a valid Xing header. * Reverted my brainless short-xing-header change. This was only valid for layer 3. (2) Xing/VBRI header evaluation: Fixed possible overflow in bitrate calculation. (3) MPEG thread: Avoid double chunk size limiting for the rare case of 8 MB modded Ondios.
|
2005-09-15 05:29:26 +00:00 |
|
mpeg.h
|
|
|
|
panic.h
|
|
|
|
pcf50605.h
|
Move all iPod targets into the target tree. FS#5890
|
2006-10-05 10:58:51 +00:00 |
|
pcf50606.h
|
Moved pcf50606 stuff to target directory.
|
2006-10-25 23:24:07 +00:00 |
|
pcm_playback.h
|
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
|
2006-11-06 18:07:30 +00:00 |
|
pcm_record.h
|
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
|
2006-11-06 18:07:30 +00:00 |
|
pcm_sampr.h
|
Forgot to use cvs add on a few new files in the fresh checkout I used. woops.
|
2006-11-06 18:18:05 +00:00 |
|
pnx0101.h
|
Iriver iFP7xx sound support.
|
2006-08-12 21:03:23 +00:00 |
|
power.h
|
Work-in-progress rework of charging status reading & display: * Changed several charging related HAVE_* macros into one multi-value CONFIG_CHARGING. * Always use proper macros for charging states. * Battery symbol charging animation now starts from current level on all targets with charging. Two-colour animation kept for non-b&w targets. Round down fill level while charging as before, but round to nearest pixel value for discharging on all targets. * Charging anim fixed on player. * Some code cleanup.
|
2006-06-06 22:23:52 +00:00 |
|
powermgmt.h
|
General: changed local adc to voltage conversions in several places to use battery_voltage. Added battery_read_info function for unfiltered battery information. x5: removed adc_read as a distinct function. Removed adc tick task. adc_init is empty inline. Adjusted battery scale, voltage to level array and read 10 bits from the ADC for battery since 255 levels is not enough for true centivolt resolution.
|
2006-10-30 11:33:38 +00:00 |
|
pp5002.h
|
Initial work for coprocessor support on iPods. FS#5755
|
2006-08-03 16:29:42 +00:00 |
|
pp5020.h
|
Detect charger connected on H10. No need to sleep(HZ) when powering off.
|
2006-09-20 23:21:59 +00:00 |
|
pp5024.h
|
added mostly dummy changes to allow building of a Sansa e200 bootloader
|
2006-08-01 22:28:14 +00:00 |
|
profile.h
|
Fix profile builds
|
2006-08-24 13:10:20 +00:00 |
|
replaygain.h
|
Add support for parsing binary data ID3 tags. Add support for parsing RVA2 ID3 tags for replaygain values instead of TXXX tags when playing files tagged with ID3v2.4. Patch by psyche78 (task #2937)
|
2006-07-20 10:35:20 +00:00 |
|
rolo.h
|
|
|
|
rtc.h
|
|
|
|
s3c2440.h
|
fix typo
|
2006-11-05 07:55:00 +00:00 |
|
serial.h
|
Logf output on the serial port for h100 targets
|
2006-10-12 20:22:16 +00:00 |
|
sh7034.h
|
|
|
|
sound.h
|
Patch #5347 by Rani Hod - Adds FM radio and recording features to the iAudio X5.
|
2006-07-21 08:42:28 +00:00 |
|
system.h
|
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
|
2006-11-06 18:07:30 +00:00 |
|
tcc730.h
|
|
|
|
thread.h
|
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
|
2006-11-06 18:07:30 +00:00 |
|
timer.h
|
|
|
|
tlv320.h
|
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
|
2006-11-06 18:07:30 +00:00 |
|
tuner.h
|
Implement region setting for the fm tuner. The region setting affects deemphasis, band limits and step size. Fixes FS#5929, FS#5928.
|
2006-10-05 12:40:13 +00:00 |
|
uda1380.h
|
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
|
2006-11-06 18:07:30 +00:00 |
|
usb.h
|
H300 bootloader USB mode
|
2005-12-06 12:12:29 +00:00 |
|
usb_serial.h
|
|
|
|
wm8731l.h
|
Move definitions to their proper place
|
2006-03-30 20:48:15 +00:00 |
|
wm8758.h
|
Add support for displaying the the current path or the full path (or neither) in the file browser. Check General Settings -> File View -> Show Path for the options.
|
2006-08-15 09:38:13 +00:00 |
|
wm8975.h
|
|
|
|
wmcodec.h
|
generalise the wolfson codec code a bit
|
2006-10-20 17:12:42 +00:00 |
128c3ee686