Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm
History
Michael Sevakis 7fb0f71668 Gigabeat: Replace generic i2c driver with one that uses the CPU's builtin controller. Add some clocking registers to 'View I/O ports'. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13720 a1c6a512-1295-4272-9138-f99709370657
2007-06-26 02:11:30 +00:00
..
archos/av300
ipod Moved archos backlight code to target tree. Changed old mutlivalue CONFIG_BACKLIGHT to a simple HAVE_BACKLIGHT. 2007-04-12 22:12:13 +00:00
iriver move the iriver ifp7xx and other pnx0101 related files together in the target tree 2007-04-19 10:14:55 +00:00
pnx0101 move to target tree 2007-04-19 10:20:54 +00:00
s3c2440/gigabeat-fx Gigabeat: Replace generic i2c driver with one that uses the CPU's builtin controller. Add some clocking registers to 'View I/O ports'. 2007-06-26 02:11:30 +00:00
sandisk/sansa-e200 PP5024 (e200): There's more than one HI IRQ bit for enabling GPIO IRQs. Port A uses bit 32 and port F,H use bit 33. Please add futher GPIOx_IRQ/MASK defines and associations to pp5024.h as they are discovered. I guess the SD card patch will need a small update to properly detect insertion. 2007-06-17 00:07:23 +00:00
tatung/tpj1022 Moved archos backlight code to target tree. Changed old mutlivalue CONFIG_BACKLIGHT to a simple HAVE_BACKLIGHT. 2007-04-12 22:12:13 +00:00
ata-as-arm.S
ata-pp5002.c
ata-pp5020.c Some more replacing of inl/outl with register #define's (doesn't change end-result binary). Add lots more #define's based on the ipodlinux wiki and some extrapolation. 2007-03-03 23:37:17 +00:00
ata-target.h
audio-pp.c Straighten out some audio path APIs and misc. audio stuff. Having recording is not a prerequisite to having input/output source selection which is probably most useful when adding a audio input features like FM to a new port without forcing recording to be implemented first. 2007-06-08 23:42:04 +00:00
crt0-pp-bl.S
crt0-pp.S FS#5472 add a memory size prompt to configure to allow ipod video builds for 2007-05-19 14:35:11 +00:00
crt0.S Gigabeat: Get rid of the obsolete FIQ wrapper (not used on PP anymore FIY, but no change there). Use the FIQ stack for DMA address and size variables instead of globals. 2007-05-03 12:39:36 +00:00
i2c-pp.c Change i2c config on e200. Seems to speed things up somewhat. 2007-05-17 22:49:27 +00:00
i2s-pp.c e200: Use 16-16 L-R pairs when writing to the TX FIFO. Kill the channel swapping and clicks. Reduce number of FIQs. Should be adaptable to iPods and other PP targets in a few minutes work, eh? 2007-05-22 15:34:24 +00:00
memcpy-arm.S
memmove-arm.S
memset-arm.S
memset16-arm.S
memswap128-arm.S SWCODEC: Get rid of extra swap buffer and get back 512K of RAM or 100K if the players RAM is <= 1MB. Make any needed changes to things to stabilize and facilitate this including removing flattening out initialization. Comment some things heavily. Fix a few logfs I didn't want to see the compiler complaining about. 2007-03-19 22:04:17 +00:00
pcm-pp.c Accept FS#7178 - Sansa e200 FM tuner support by Ivan Zupan. Do the needed integration work into recording and the AS3514 audio driver. Do a little AS3514 fiq_record tweak to have it all work nicely from the start. 2007-06-06 19:23:48 +00:00
system-arm.h Gigabeat: Separate driver for audio codec. Tweak pcm driver to comply with intended interface. 2007-05-02 22:33:24 +00:00
system-pp502x.c PP5024 (e200): There's more than one HI IRQ bit for enabling GPIO IRQs. Port A uses bit 32 and port F,H use bit 33. Please add futher GPIOx_IRQ/MASK defines and associations to pp5024.h as they are discovered. I guess the SD card patch will need a small update to properly detect insertion. 2007-06-17 00:07:23 +00:00
system-pp5002.c Don't need all those #include's. 2007-04-22 12:44:45 +00:00
system-target.h Heh. Better way to load the PROCESSOR_ID address. Thanks Thom. :) 2007-04-14 11:46:05 +00:00
usb-pp.c
usb-target.h
wmcodec-pp.c Reenable aynchronous audio init stage. Really just single stage with aynchronous enabling of outputs. Keeps audio_init last so prior init steps can use the audiobuffer in any desired way. Audio will be fully initialized by the time the UI is entered. Playback of voice or audio will be delayed properly until audio hardware is ready. 2007-03-11 05:04:48 +00:00