eef970428b
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@1821 a1c6a512-1295-4272-9138-f99709370657
1390 lines
34 KiB
C
1390 lines
34 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2002 by Alan Korr
|
|
*
|
|
* All files in this archive are subject to the GNU General Public License.
|
|
* See the file COPYING in the source tree root for full license agreement.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#include "config.h"
|
|
#include "lcd.h"
|
|
#include "kernel.h"
|
|
#include "thread.h"
|
|
#include <string.h>
|
|
#include <stdlib.h>
|
|
#include "file.h"
|
|
#include "debug.h"
|
|
#include "system.h"
|
|
|
|
#ifdef LOADABLE_FONTS
|
|
#include "ajf.h"
|
|
#include "panic.h"
|
|
#endif
|
|
|
|
|
|
|
|
/*** definitions ***/
|
|
|
|
#define LCDR (PBDR_ADDR+1)
|
|
|
|
#ifdef HAVE_LCD_CHARCELLS
|
|
|
|
#define LCD_DS 1 // PB0 = 1 --- 0001 --- LCD-DS
|
|
#define LCD_CS 2 // PB1 = 1 --- 0010 --- /LCD-CS
|
|
#define LCD_SD 4 // PB2 = 1 --- 0100 --- LCD-SD
|
|
#define LCD_SC 8 // PB3 = 1 --- 1000 --- LCD-SC
|
|
#ifdef HAVE_NEW_CHARCELL_LCD
|
|
# define LCD_CONTRAST_SET ((char)0x50)
|
|
# define LCD_CRAM ((char)0x80) /* Characters */
|
|
# define LCD_PRAM ((char)0xC0) /* Patterns */
|
|
# define LCD_IRAM ((char)0x40) /* Icons */
|
|
#else
|
|
# define LCD_CONTRAST_SET ((char)0xA8)
|
|
# define LCD_CRAM ((char)0xB0) /* Characters */
|
|
# define LCD_PRAM ((char)0x80) /* Patterns */
|
|
# define LCD_IRAM ((char)0xE0) /* Icons */
|
|
#endif
|
|
#define LCD_CURSOR(x,y) ((char)(LCD_CRAM+((y)*16+(x))))
|
|
#define LCD_ICON(i) ((char)(LCD_IRAM+i))
|
|
|
|
#elif HAVE_LCD_BITMAP
|
|
|
|
#define LCD_SD 1 // PB0 = 1 --- 0001
|
|
#define LCD_SC 2 // PB1 = 1 --- 0010
|
|
#define LCD_RS 4 // PB2 = 1 --- 0100
|
|
#define LCD_CS 8 // PB3 = 1 --- 1000
|
|
#define LCD_DS LCD_RS
|
|
|
|
#define LCD_SET_LOWER_COLUMN_ADDRESS ((char)0x00)
|
|
#define LCD_SET_HIGHER_COLUMN_ADDRESS ((char)0x10)
|
|
#define LCD_SET_INTERNAL_REGULATOR_RESISTOR_RATIO ((char)0x20)
|
|
#define LCD_SET_POWER_CONTROL_REGISTER ((char)0x28)
|
|
#define LCD_SET_DISPLAY_START_LINE ((char)0x40)
|
|
#define LCD_SET_CONTRAST_CONTROL_REGISTER ((char)0x81)
|
|
#define LCD_SET_SEGMENT_REMAP ((char)0xA0)
|
|
#define LCD_SET_LCD_BIAS ((char)0xA2)
|
|
#define LCD_SET_ENTIRE_DISPLAY_OFF ((char)0xA4)
|
|
#define LCD_SET_ENTIRE_DISPLAY_ON ((char)0xA5)
|
|
#define LCD_SET_NORMAL_DISPLAY ((char)0xA6)
|
|
#define LCD_SET_REVERSE_DISPLAY ((char)0xA7)
|
|
#define LCD_SET_INDICATOR_OFF ((char)0xAC)
|
|
#define LCD_SET_INDICATOR_ON ((char)0xAD)
|
|
#define LCD_SET_DISPLAY_OFF ((char)0xAE)
|
|
#define LCD_SET_DISPLAY_ON ((char)0xAF)
|
|
#define LCD_SET_PAGE_ADDRESS ((char)0xB0)
|
|
#define LCD_SET_COM_OUTPUT_SCAN_DIRECTION ((char)0xC0)
|
|
#define LCD_SET_DISPLAY_OFFSET ((char)0xD3)
|
|
#define LCD_SET_READ_MODIFY_WRITE_MODE ((char)0xE0)
|
|
#define LCD_SOFTWARE_RESET ((char)0xE2)
|
|
#define LCD_NOP ((char)0xE3)
|
|
#define LCD_SET_END_OF_READ_MODIFY_WRITE_MODE ((char)0xEE)
|
|
|
|
/* LCD command codes */
|
|
#define LCD_CNTL_RESET 0xe2 // Software reset
|
|
#define LCD_CNTL_POWER 0x2f // Power control
|
|
#define LCD_CNTL_CONTRAST 0x81 // Contrast
|
|
#define LCD_CNTL_OUTSCAN 0xc8 // Output scan direction
|
|
#define LCD_CNTL_SEGREMAP 0xa1 // Segment remap
|
|
#define LCD_CNTL_DISPON 0xaf // Display on
|
|
|
|
#define LCD_CNTL_PAGE 0xb0 // Page address
|
|
#define LCD_CNTL_HIGHCOL 0x10 // Upper column address
|
|
#define LCD_CNTL_LOWCOL 0x00 // Lower column address
|
|
|
|
|
|
#endif /* CHARCELL or BITMAP */
|
|
|
|
|
|
/*** generic code ***/
|
|
|
|
struct scrollinfo {
|
|
char text[MAX_PATH];
|
|
char line[32];
|
|
int textlen;
|
|
int offset;
|
|
int startx;
|
|
int starty;
|
|
int space;
|
|
};
|
|
|
|
static void scroll_thread(void);
|
|
static char scroll_stack[DEFAULT_STACK_SIZE];
|
|
static char scroll_name[] = "scroll";
|
|
static char scroll_speed = 8; /* updates per second */
|
|
static char scroll_spacing = 3; /* spaces between end and start of text */
|
|
|
|
|
|
static struct scrollinfo scroll; /* only one scroll line at the moment */
|
|
static int scroll_count = 0;
|
|
|
|
#ifndef SIMULATOR
|
|
/*
|
|
* About /CS,DS,SC,SD
|
|
* ------------------
|
|
*
|
|
* LCD on JBP and JBR uses a SPI protocol to receive orders (SDA and SCK lines)
|
|
*
|
|
* - /CS -> Chip Selection line :
|
|
* 0 : LCD chipset is activated.
|
|
* - DS -> Data Selection line, latched at the rising edge
|
|
* of the 8th serial clock (*) :
|
|
* 0 : instruction register,
|
|
* 1 : data register;
|
|
* - SC -> Serial Clock line (SDA).
|
|
* - SD -> Serial Data line (SCK), latched at the rising edge
|
|
* of each serial clock (*).
|
|
*
|
|
* _ _
|
|
* /CS \ /
|
|
* \______________________________________________________/
|
|
* _____ ____ ____ ____ ____ ____ ____ ____ ____ _____
|
|
* SD \/ D7 \/ D6 \/ D5 \/ D4 \/ D3 \/ D2 \/ D1 \/ D0 \/
|
|
* _____/\____/\____/\____/\____/\____/\____/\____/\____/\_____
|
|
*
|
|
* _____ _ _ _ _ _ _ _ ________
|
|
* SC \ * \ * \ * \ * \ * \ * \ * \ *
|
|
* \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/
|
|
* _ _________________________________________________________
|
|
* DS \/
|
|
* _/\_________________________________________________________
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* The only way to do logical operations in an atomic way
|
|
* on SH1 is using :
|
|
*
|
|
* or.b/and.b/tst.b/xor.b #imm,@(r0,gbr)
|
|
*
|
|
* but GCC doesn't generate them at all so some assembly
|
|
* codes are needed here.
|
|
*
|
|
* The Global Base Register gbr is expected to be zero
|
|
* and r0 is the address of one register in the on-chip
|
|
* peripheral module.
|
|
*
|
|
*/
|
|
|
|
#define ASM_IMPLEMENTATION
|
|
|
|
static void lcd_write(bool command, int byte) __attribute__ ((section (".icode")));
|
|
static void lcd_write(bool command, int byte)
|
|
|
|
#ifdef ASM_IMPLEMENTATION
|
|
{
|
|
asm("and.b %0, @(r0,gbr)"
|
|
:
|
|
: /* %0 */ "I"(~(LCD_CS|LCD_DS|LCD_SD|LCD_SC)),
|
|
/* %1 */ "z"(LCDR));
|
|
|
|
if (command)
|
|
asm ("shll8 %0\n"
|
|
"0: \n\t"
|
|
"and.b %2,@(r0,gbr)\n\t"
|
|
"shll %0\n\t"
|
|
"bf 1f\n\t"
|
|
"or.b %3,@(r0,gbr)\n"
|
|
"1: \n\t"
|
|
"or.b %4,@(r0,gbr)\n"
|
|
"add #-1,%1\n\t"
|
|
"cmp/pl %1\n\t"
|
|
"bt 0b"
|
|
:
|
|
: /* %0 */ "r"(((unsigned)byte)<<16),
|
|
/* %1 */ "r"(8),
|
|
/* %2 */ "I"(~(LCD_SC|LCD_SD|LCD_DS)),
|
|
/* %3 */ "I"(LCD_SD),
|
|
/* %4 */ "I"(LCD_SC),
|
|
/* %5 */ "z"(LCDR));
|
|
else
|
|
#if 0
|
|
asm ("shll8 %0\n"
|
|
"0: \n\t"
|
|
"and.b %2, @(r0,gbr)\n\t"
|
|
"shll %0\n\t"
|
|
"bf 1f\n\t"
|
|
"or.b %3, @(r0,gbr)\n"
|
|
"1: \n\t"
|
|
"or.b %4, @(r0,gbr)\n"
|
|
"add #-1, %1\n\t"
|
|
"cmp/pl %1\n\t"
|
|
"bt 0b"
|
|
:
|
|
: /* %0 */ "r"(((unsigned)byte)<<16),
|
|
/* %1 */ "r"(8),
|
|
/* %2 */ "I"(~(LCD_SC|LCD_SD)),
|
|
/* %3 */ "I"(LCD_SD|LCD_DS),
|
|
/* %4 */ "I"(LCD_SC|LCD_DS),
|
|
/* %5 */ "z"(LCDR));
|
|
#else
|
|
asm ("shll8 %0\n"
|
|
"0: \n\t"
|
|
"and.b %2, @(r0,gbr)\n\t"
|
|
"shll %0\n\t"
|
|
"bf 1f\n\t"
|
|
"or.b %3, @(r0,gbr)\n"
|
|
"1: \n\t"
|
|
"or.b %4, @(r0,gbr)\n"
|
|
"and.b %2, @(r0,gbr)\n\t"
|
|
"shll %0\n\t"
|
|
"bf 1f\n\t"
|
|
"or.b %3, @(r0,gbr)\n"
|
|
"1: \n\t"
|
|
"or.b %4, @(r0,gbr)\n"
|
|
"and.b %2, @(r0,gbr)\n\t"
|
|
"shll %0\n\t"
|
|
"bf 1f\n\t"
|
|
"or.b %3, @(r0,gbr)\n"
|
|
"1: \n\t"
|
|
"or.b %4, @(r0,gbr)\n"
|
|
"and.b %2, @(r0,gbr)\n\t"
|
|
"shll %0\n\t"
|
|
"bf 1f\n\t"
|
|
"or.b %3, @(r0,gbr)\n"
|
|
"1: \n\t"
|
|
"or.b %4, @(r0,gbr)\n"
|
|
"and.b %2, @(r0,gbr)\n\t"
|
|
"shll %0\n\t"
|
|
"bf 1f\n\t"
|
|
"or.b %3, @(r0,gbr)\n"
|
|
"1: \n\t"
|
|
"or.b %4, @(r0,gbr)\n"
|
|
"and.b %2, @(r0,gbr)\n\t"
|
|
"shll %0\n\t"
|
|
"bf 1f\n\t"
|
|
"or.b %3, @(r0,gbr)\n"
|
|
"1: \n\t"
|
|
"or.b %4, @(r0,gbr)\n"
|
|
"and.b %2, @(r0,gbr)\n\t"
|
|
"shll %0\n\t"
|
|
"bf 1f\n\t"
|
|
"or.b %3, @(r0,gbr)\n"
|
|
"1: \n\t"
|
|
"or.b %4, @(r0,gbr)\n"
|
|
"and.b %2, @(r0,gbr)\n\t"
|
|
"shll %0\n\t"
|
|
"bf 1f\n\t"
|
|
"or.b %3, @(r0,gbr)\n"
|
|
"1: \n\t"
|
|
"or.b %4, @(r0,gbr)\n"
|
|
:
|
|
: /* %0 */ "r"(((unsigned)byte)<<16),
|
|
/* %1 */ "r"(8),
|
|
/* %2 */ "I"(~(LCD_SC|LCD_SD)),
|
|
/* %3 */ "I"(LCD_SD|LCD_DS),
|
|
/* %4 */ "I"(LCD_SC|LCD_DS),
|
|
/* %5 */ "z"(LCDR));
|
|
#endif
|
|
|
|
asm("or.b %0, @(r0,gbr)"
|
|
:
|
|
: /* %0 */ "I"(LCD_CS|LCD_DS|LCD_SD|LCD_SC),
|
|
/* %1 */ "z"(LCDR));
|
|
}
|
|
#else
|
|
{
|
|
int i;
|
|
char on,off;
|
|
|
|
PBDR &= ~LCD_CS; /* enable lcd chip select */
|
|
|
|
if ( command ) {
|
|
on=~(LCD_SD|LCD_SC|LCD_DS);
|
|
off=LCD_SC;
|
|
}
|
|
else {
|
|
on=~(LCD_SD|LCD_SC);
|
|
off=LCD_SC|LCD_DS;
|
|
}
|
|
|
|
/* clock out each bit, MSB first */
|
|
for (i=0x80;i;i>>=1)
|
|
{
|
|
PBDR &= on;
|
|
if (i & byte)
|
|
PBDR |= LCD_SD;
|
|
PBDR |= off;
|
|
}
|
|
|
|
PBDR |= LCD_CS; /* disable lcd chip select */
|
|
}
|
|
#endif /* ASM_IMPLEMENTATION */
|
|
#endif /* !SIMULATOR */
|
|
|
|
/*** model specific code */
|
|
|
|
#ifdef HAVE_LCD_CHARCELLS
|
|
|
|
#ifdef HAVE_NEW_CHARCELL_LCD
|
|
|
|
static const unsigned char lcd_ascii[] = {
|
|
0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
|
|
0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f,
|
|
0x10,0x11,0x05,0x13,0x14,0x15,0x16,0x17,
|
|
0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f,
|
|
0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27,
|
|
0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f,
|
|
0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37,
|
|
0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
|
|
0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47,
|
|
0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f,
|
|
0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57,
|
|
0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f,
|
|
0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67,
|
|
0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f,
|
|
0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77,
|
|
0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f,
|
|
0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,
|
|
0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,
|
|
0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,
|
|
0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f,
|
|
0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,
|
|
0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,
|
|
0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7,
|
|
0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf,
|
|
0x41,0x41,0x41,0x41,0x41,0x41,0x20,0x43,
|
|
0x45,0x45,0x45,0x45,0x49,0x49,0x49,0x49,
|
|
0x44,0x4e,0x4f,0x4f,0x4f,0x4f,0x4f,0x20,
|
|
0x20,0x55,0x55,0x55,0x55,0x59,0x20,0x20,
|
|
0x61,0x61,0x61,0x61,0x61,0x61,0x20,0x63,
|
|
0x65,0x65,0x65,0x65,0x69,0x69,0x69,0x69,
|
|
0x6f,0x6e,0x6f,0x6f,0x6f,0x6f,0x6f,0x20,
|
|
0x20,0x75,0x75,0x75,0x75,0x79,0x20,0x79
|
|
};
|
|
|
|
#else
|
|
|
|
static const unsigned char lcd_ascii[] = {
|
|
0x00,0x01,0x02,0x03,0x00,0x84,0x85,0x89,
|
|
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
|
0xec,0xe3,0xe2,0xe1,0xe0,0xdf,0x15,0x00,
|
|
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
|
0x24,0x25,0x26,0x37,0x06,0x29,0x2a,0x2b,
|
|
0x2c,0x2d,0x2e,0x2f,0x30,0x31,0x32,0x33,
|
|
0x34,0x35,0x36,0x37,0x38,0x39,0x3a,0x3b,
|
|
0x3c,0x3d,0x3e,0x3f,0x40,0x41,0x42,0x43,
|
|
0x44,0x45,0x46,0x47,0x48,0x49,0x4a,0x4b,
|
|
0x4c,0x4d,0x4e,0x4f,0x50,0x51,0x52,0x53,
|
|
0x54,0x55,0x56,0x57,0x58,0x59,0x5a,0x5b,
|
|
0x5c,0x5d,0x5e,0xa9,0x33,0xce,0x00,0x15,
|
|
0x00,0x65,0x66,0x67,0x68,0x69,0x6a,0x6b,
|
|
0x6c,0x6d,0x6e,0x6f,0x70,0x71,0x72,0x73,
|
|
0x74,0x75,0x76,0x77,0x78,0x79,0x7a,0x7b,
|
|
0x7c,0x7d,0x7e,0x24,0x24,0x24,0x24,0x24,
|
|
0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,
|
|
0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,
|
|
0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,
|
|
0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f,
|
|
0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,
|
|
0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,
|
|
0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7,
|
|
0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf,
|
|
0x45,0x45,0x45,0x45,0x45,0x45,0x24,0x47,
|
|
0x49,0x49,0x49,0x49,0x4d,0x4d,0x4d,0x4d,
|
|
0x48,0x52,0x53,0x53,0x53,0x53,0x53,0x24,
|
|
0x24,0x59,0x59,0x59,0x59,0x5d,0x24,0x24,
|
|
0x65,0x65,0x65,0x65,0x65,0x65,0x24,0x67,
|
|
0x69,0x69,0x69,0x69,0x6d,0x6d,0x6d,0x6d,
|
|
0x73,0x72,0x73,0x73,0x73,0x73,0x73,0x24,
|
|
0x24,0x79,0x79,0x79,0x79,0x7d,0x24,0x7d
|
|
};
|
|
#endif /* HAVE_NEW_CHARCELL_LCD */
|
|
|
|
#ifndef SIMULATOR
|
|
void lcd_clear_display(void)
|
|
{
|
|
int i;
|
|
lcd_write(true,LCD_CURSOR(0,0));
|
|
for (i=0;i<32;i++)
|
|
lcd_write(false,lcd_ascii[' ']);
|
|
}
|
|
|
|
void lcd_puts(int x, int y, unsigned char *string)
|
|
{
|
|
lcd_write(true,LCD_CURSOR(x,y));
|
|
while (*string && x++<11)
|
|
lcd_write(false,lcd_ascii[*(unsigned char*)string++]);
|
|
}
|
|
|
|
void lcd_define_pattern (int which,char *pattern,int length)
|
|
{
|
|
int i;
|
|
lcd_write(true,LCD_PRAM|which);
|
|
for (i=0;i<length;i++)
|
|
lcd_write(false,pattern[i]);
|
|
}
|
|
|
|
void lcd_double_height(bool on)
|
|
{
|
|
lcd_write(true,on?9:8);
|
|
}
|
|
|
|
static char icon_pos[] =
|
|
{
|
|
0, 0, 0, 0, /* Battery */
|
|
2, /* USB */
|
|
3, /* Play */
|
|
4, /* Record */
|
|
5, /* Pause */
|
|
5, /* Audio */
|
|
6, /* Repeat */
|
|
7, /* 1 */
|
|
9, /* Volume */
|
|
9, /* Volume 1 */
|
|
9, /* Volume 2 */
|
|
10, /* Volume 3 */
|
|
10, /* Volume 4 */
|
|
10, /* Volume 5 */
|
|
10, /* Param */
|
|
};
|
|
|
|
static char icon_mask[] =
|
|
{
|
|
0x02, 0x08, 0x04, 0x10, /* Battery */
|
|
0x04, /* USB */
|
|
0x10, /* Play */
|
|
0x10, /* Record */
|
|
0x02, /* Pause */
|
|
0x10, /* Audio */
|
|
0x02, /* Repeat */
|
|
0x01, /* 1 */
|
|
0x04, /* Volume */
|
|
0x02, /* Volume 1 */
|
|
0x01, /* Volume 2 */
|
|
0x08, /* Volume 3 */
|
|
0x04, /* Volume 4 */
|
|
0x01, /* Volume 5 */
|
|
0x10, /* Param */
|
|
};
|
|
|
|
void lcd_icon(int icon, bool enable)
|
|
{
|
|
static unsigned char icon_mirror[11] = {0};
|
|
int pos, mask;
|
|
|
|
pos = icon_pos[icon];
|
|
mask = icon_mask[icon];
|
|
|
|
lcd_write(true, LCD_ICON(pos));
|
|
|
|
if(enable)
|
|
icon_mirror[pos] |= mask;
|
|
else
|
|
icon_mirror[pos] &= ~mask;
|
|
|
|
lcd_write(false, icon_mirror[pos]);
|
|
}
|
|
#endif /* !SIMULATOR */
|
|
|
|
#endif /* HAVE_LCD_CHARCELLS */
|
|
|
|
#if defined(SIMULATOR) && defined(HAVE_LCD_CHARCELLS)
|
|
void lcd_icon(int icon, bool enable)
|
|
{
|
|
icon = icon;
|
|
enable = enable;
|
|
}
|
|
#endif
|
|
|
|
#if defined(HAVE_LCD_CHARCELLS) || defined(SIMULATOR) /* not BITMAP */
|
|
void lcd_init (void)
|
|
{
|
|
create_thread(scroll_thread, scroll_stack,
|
|
sizeof(scroll_stack), scroll_name);
|
|
#if defined(LOADABLE_FONTS) && defined(SIMULATOR)
|
|
lcd_init_fonts();
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
#ifdef SIMULATOR
|
|
void lcd_set_contrast(int val)
|
|
{
|
|
val = val;
|
|
}
|
|
#else
|
|
#ifdef HAVE_LCD_BITMAP
|
|
void lcd_set_contrast(int val)
|
|
{
|
|
lcd_write(true, LCD_CNTL_CONTRAST);
|
|
lcd_write(true, val);
|
|
}
|
|
#else
|
|
void lcd_set_contrast(int val)
|
|
{
|
|
lcd_write(true, LCD_CONTRAST_SET);
|
|
lcd_write(false, 31-val);
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(HAVE_LCD_BITMAP) || defined(SIMULATOR) /* not CHARCELLS */
|
|
|
|
/*
|
|
* All bitmaps have this format:
|
|
* Bits within a byte are arranged veritcally, LSB at top.
|
|
* Bytes are stored in column-major format, with byte 0 at top left,
|
|
* byte 1 is 2nd from top, etc. Bytes following left-most column
|
|
* starts 2nd left column, etc.
|
|
*
|
|
* Note: The HW takes bitmap bytes in row-major order.
|
|
*
|
|
* Memory copy of display bitmap
|
|
*/
|
|
unsigned char lcd_framebuffer[LCD_WIDTH][LCD_HEIGHT/8] __attribute__ ((section (".idata")));
|
|
|
|
static int font=0;
|
|
static int xmargin=0;
|
|
static int ymargin=0;
|
|
|
|
/*
|
|
* ASCII character generation tables
|
|
*
|
|
* This contains only the printable characters (0x20-0x7f).
|
|
* Each element in this table is a character pattern bitmap.
|
|
*/
|
|
#define ASCII_MIN 0x20 /* First char in table */
|
|
#define ASCII_MAX 0x7f /* Last char in table */
|
|
|
|
extern unsigned char char_gen_6x8[][5];
|
|
extern unsigned char char_gen_8x12[][14];
|
|
extern unsigned char char_gen_12x16[][22];
|
|
|
|
/* All zeros and ones bitmaps for area filling */
|
|
static unsigned char zeros[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00 };
|
|
static unsigned char ones[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
|
0xff, 0xff };
|
|
static char fonts[] = { 6,8,12 };
|
|
static char fontheight[] = { 8,12,16 };
|
|
|
|
#ifndef SIMULATOR
|
|
|
|
/*
|
|
* Initialize LCD
|
|
*/
|
|
void lcd_init (void)
|
|
{
|
|
/* Initialize PB0-3 as output pins */
|
|
PBCR2 &= 0xff00; /* MD = 00 */
|
|
PBIOR |= 0x000f; /* IOR = 1 */
|
|
|
|
lcd_clear_display();
|
|
lcd_update();
|
|
create_thread(scroll_thread, scroll_stack,
|
|
sizeof(scroll_stack), scroll_name);
|
|
}
|
|
|
|
/*
|
|
* Update the display.
|
|
* This must be called after all other LCD functions that change the display.
|
|
*/
|
|
void lcd_update (void) __attribute__ ((section (".icode")));
|
|
void lcd_update (void)
|
|
{
|
|
int x, y;
|
|
|
|
/* Copy display bitmap to hardware */
|
|
for (y = 0; y < LCD_HEIGHT/8; y++)
|
|
{
|
|
lcd_write (true, LCD_CNTL_PAGE | (y & 0xf));
|
|
lcd_write (true, LCD_CNTL_HIGHCOL);
|
|
lcd_write (true, LCD_CNTL_LOWCOL);
|
|
|
|
for (x = 0; x < LCD_WIDTH; x++)
|
|
lcd_write (false, lcd_framebuffer[x][y]);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Update a fraction of the display.
|
|
*/
|
|
void lcd_update_rect (int, int, int, int) __attribute__ ((section (".icode")));
|
|
void lcd_update_rect (int x_start, int y,
|
|
int width, int height)
|
|
{
|
|
int ymax;
|
|
int xmax;
|
|
int x;
|
|
|
|
/* The Y coordinates have to work on even 8 pixel rows */
|
|
ymax = (y + height)/8;
|
|
y /= 8;
|
|
|
|
xmax = x_start + width;
|
|
|
|
if(xmax > LCD_WIDTH)
|
|
xmax = LCD_WIDTH;
|
|
if(ymax >= LCD_HEIGHT/8)
|
|
ymax = LCD_HEIGHT/8-1;
|
|
|
|
/* Copy specified rectange bitmap to hardware */
|
|
for (; y <= ymax; y++)
|
|
{
|
|
lcd_write (true, LCD_CNTL_PAGE | (y & 0xf));
|
|
lcd_write (true, LCD_CNTL_HIGHCOL | ((x_start>>4) & 0xf));
|
|
lcd_write (true, LCD_CNTL_LOWCOL | (x_start & 0xf));
|
|
|
|
for (x = x_start; x < xmax; x++)
|
|
lcd_write (false, lcd_framebuffer[x][y]);
|
|
}
|
|
}
|
|
|
|
#endif /* SIMULATOR */
|
|
|
|
/*
|
|
* Clear the display
|
|
*/
|
|
void lcd_clear_display (void)
|
|
{
|
|
memset (lcd_framebuffer, 0, sizeof lcd_framebuffer);
|
|
#if defined(SIMULATOR) && defined(HAVE_LCD_CHARCELLS)
|
|
/* this function is being used when simulating a charcell LCD and
|
|
then we update immediately */
|
|
lcd_update();
|
|
#endif
|
|
}
|
|
|
|
void lcd_setfont(int newfont)
|
|
{
|
|
font = newfont;
|
|
}
|
|
|
|
void lcd_setmargins(int x, int y)
|
|
{
|
|
xmargin = x;
|
|
ymargin = y;
|
|
}
|
|
|
|
int lcd_getxmargin(void)
|
|
{
|
|
return xmargin;
|
|
}
|
|
|
|
int lcd_getymargin(void)
|
|
{
|
|
return ymargin;
|
|
}
|
|
|
|
|
|
|
|
#ifdef LOADABLE_FONTS
|
|
|
|
static unsigned char* _font = NULL;
|
|
|
|
int lcd_init_fonts(void)
|
|
{
|
|
if (!_font)
|
|
_font = ajf_read_font("/system.ajf");
|
|
|
|
if (!_font)
|
|
{
|
|
lcd_putsxy(0,0,"No font", 0);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void lcd_setldfont(unsigned char* f)
|
|
{
|
|
_font = f;
|
|
}
|
|
|
|
unsigned char* lcd_getcurrentldfont()
|
|
{
|
|
if (!_font)
|
|
panicf("No font loaded!");
|
|
return _font;
|
|
}
|
|
|
|
/*
|
|
* Return width and height of a string with a given font.
|
|
*/
|
|
int lcd_getstringsize(unsigned char *str, unsigned char* font, int *w, int *h)
|
|
{
|
|
int width=0;
|
|
int height=0;
|
|
unsigned char ch;
|
|
|
|
if (!font)
|
|
panicf("No font specified");
|
|
|
|
while((ch = *str++))
|
|
{
|
|
int dw,dh;
|
|
ajf_get_charsize(ch, font, &dw, &dh);
|
|
if (dh>height)
|
|
height = dh;
|
|
width+=dw;
|
|
}
|
|
*w = width;
|
|
*h = height;
|
|
|
|
return width;
|
|
}
|
|
|
|
/*
|
|
* Put a string at specified bit position
|
|
*/
|
|
|
|
void lcd_putsldfxy(int x, int y, unsigned char *str)
|
|
{
|
|
unsigned char ch;
|
|
int nx;
|
|
int ny=8;
|
|
int lcd_x = x;
|
|
int lcd_y = y;
|
|
if (!_font)
|
|
{
|
|
lcd_putsxy(0,0,"No font", 0);
|
|
return;
|
|
}
|
|
ny = (int)_font[2];
|
|
while (((ch = *str++) != '\0'))
|
|
{
|
|
unsigned char *char_buf = ajf_get_charbuf(ch, _font, &nx, &ny);
|
|
if (!char_buf)
|
|
{
|
|
char_buf = ajf_get_charbuf('?', _font, &nx, &ny);
|
|
if (!char_buf)
|
|
panicf("Bad font");
|
|
}
|
|
if(lcd_x + nx > LCD_WIDTH)
|
|
break;
|
|
|
|
lcd_bitmap (&char_buf[0], lcd_x, lcd_y, nx, ny, true);
|
|
lcd_x += nx;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
|
|
#ifdef LCD_PROPFONTS
|
|
|
|
extern unsigned char char_dw_8x8_prop[][9];
|
|
|
|
/*
|
|
* Return width and height of a given font.
|
|
*/
|
|
int lcd_getstringsize(unsigned char *str, unsigned int font, int *w, int *h)
|
|
{
|
|
int width=0;
|
|
int height=0;
|
|
unsigned char ch, byte;
|
|
(void)font;
|
|
|
|
while((ch = *str++)) {
|
|
/* Limit to char generation table */
|
|
if (ch < ASCII_MIN)
|
|
/* replace unsupported letters with question marks */
|
|
ch = ' '-ASCII_MIN;
|
|
else
|
|
ch -= ASCII_MIN;
|
|
|
|
byte = char_dw_8x8_prop[ch][8];
|
|
width += byte>>4;
|
|
if((byte & 0x0f) > height)
|
|
height = byte & 0x0f;
|
|
|
|
}
|
|
*w = width;
|
|
*h = height;
|
|
|
|
return width;
|
|
}
|
|
|
|
/*
|
|
* Put a string at specified bit position
|
|
*/
|
|
|
|
void lcd_putspropxy(int x, int y, unsigned char *str, int thisfont)
|
|
{
|
|
unsigned int ch;
|
|
int nx;
|
|
int ny=8;
|
|
unsigned char *src;
|
|
int lcd_x = x;
|
|
int lcd_y = y;
|
|
|
|
(void)thisfont;
|
|
|
|
while (((ch = *str++) != '\0'))
|
|
{
|
|
/* Limit to char generation table */
|
|
if (ch < ASCII_MIN)
|
|
/* replace unsupported letters with question marks */
|
|
ch = ' '-ASCII_MIN;
|
|
else
|
|
ch -= ASCII_MIN;
|
|
|
|
nx = char_dw_8x8_prop[ch][8] >> 4;
|
|
|
|
if(lcd_x + nx > LCD_WIDTH)
|
|
break;
|
|
|
|
src = char_dw_8x8_prop[ch];
|
|
lcd_clearrect (lcd_x+nx, lcd_y, 1, ny);
|
|
lcd_bitmap (src, lcd_x, lcd_y, nx, ny, true);
|
|
|
|
lcd_x += nx+1;
|
|
}
|
|
}
|
|
|
|
#endif
|
|
|
|
/*
|
|
* Put a string at specified character position
|
|
*/
|
|
void lcd_puts(int x, int y, unsigned char *str)
|
|
{
|
|
#if defined(SIMULATOR) && defined(HAVE_LCD_CHARCELLS)
|
|
/* We make the simulator truncate the string if it reaches the right edge,
|
|
as otherwise it'll wrap. The real target doesn't wrap. */
|
|
|
|
char buffer[12];
|
|
if(strlen(str)+x > 11 ) {
|
|
strncpy(buffer, str, sizeof buffer);
|
|
buffer[11-x]=0;
|
|
str = buffer;
|
|
}
|
|
xmargin = 0;
|
|
ymargin = 8;
|
|
#endif
|
|
|
|
if(!str || !str[0])
|
|
return;
|
|
|
|
#ifdef LCD_PROPFONTS
|
|
lcd_putspropxy( xmargin + x*fonts[font],
|
|
ymargin + y*fontheight[font],
|
|
str, font );
|
|
#elif LOADABLE_FONTS
|
|
{
|
|
int w,h;
|
|
lcd_getstringsize(str,_font,&w,&h);
|
|
lcd_putsldfxy( xmargin + x*w/strlen(str), ymargin + y*h, str );
|
|
}
|
|
#else
|
|
lcd_putsxy( xmargin + x*fonts[font],
|
|
ymargin + y*fontheight[font],
|
|
str, font );
|
|
#endif
|
|
#if defined(SIMULATOR) && defined(HAVE_LCD_CHARCELLS)
|
|
/* this function is being used when simulating a charcell LCD and
|
|
then we update immediately */
|
|
lcd_update();
|
|
#endif
|
|
}
|
|
|
|
|
|
/*
|
|
* Put a string at specified bit position
|
|
*/
|
|
void lcd_putsxy(int x, int y, unsigned char *str, int thisfont)
|
|
{
|
|
#ifdef LCD_PROPFONTS
|
|
lcd_putspropxy(x,y,str,thisfont);
|
|
#else
|
|
|
|
int nx = fonts[thisfont];
|
|
int ny = fontheight[thisfont];
|
|
int ch;
|
|
unsigned char *src;
|
|
int lcd_x = x;
|
|
int lcd_y = y;
|
|
|
|
#ifdef LOADABLE_FONTS
|
|
if ( _font ) {
|
|
lcd_putsldfxy(x,y,str);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
while (((ch = *str++) != '\0') && (lcd_x + nx < LCD_WIDTH))
|
|
{
|
|
if (lcd_y + ny > LCD_HEIGHT)
|
|
return;
|
|
|
|
/* Limit to char generation table */
|
|
if ((ch < ASCII_MIN) || (ch > ASCII_MAX))
|
|
/* replace unsupported letters with question marks */
|
|
ch = '?' - ASCII_MIN;
|
|
else
|
|
ch -= ASCII_MIN;
|
|
|
|
if (thisfont == 2)
|
|
src = char_gen_12x16[ch];
|
|
else if (thisfont == 1)
|
|
src = char_gen_8x12[ch];
|
|
else
|
|
src = char_gen_6x8[ch];
|
|
|
|
lcd_bitmap (src, lcd_x, lcd_y, nx-1, ny, true);
|
|
lcd_bitmap (zeros, lcd_x+nx-1, lcd_y, 1, ny, true);
|
|
|
|
lcd_x += nx;
|
|
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Display a bitmap at (x, y), size (nx, ny)
|
|
* clear is true to clear destination area first
|
|
*/
|
|
void lcd_bitmap (unsigned char *src, int x, int y, int nx, int ny,
|
|
bool clear) __attribute__ ((section (".icode")));
|
|
void lcd_bitmap (unsigned char *src, int x, int y, int nx, int ny,
|
|
bool clear)
|
|
{
|
|
unsigned char *dst;
|
|
unsigned char *dst2;
|
|
unsigned int data, mask, mask2, mask3, mask4;
|
|
int shift;
|
|
|
|
if (((unsigned)x >= LCD_WIDTH) || ((unsigned)y >= LCD_HEIGHT))
|
|
return;
|
|
if (((unsigned)(x + nx)) >= LCD_WIDTH)
|
|
nx = LCD_WIDTH - x;
|
|
if (((unsigned)(y + ny)) >= LCD_HEIGHT)
|
|
ny = LCD_HEIGHT - y;
|
|
|
|
shift = y & 7;
|
|
dst2 = &lcd_framebuffer[x][y/8];
|
|
ny += shift;
|
|
|
|
/* Calculate bit masks */
|
|
mask4 = ~(0xfe << ((ny-1) & 7));
|
|
if (clear)
|
|
{
|
|
mask = ~(0xff << shift);
|
|
mask2 = 0;
|
|
mask3 = ~mask4;
|
|
if (ny <= 8)
|
|
mask3 |= mask;
|
|
}
|
|
else
|
|
mask = mask2 = mask3 = 0xff;
|
|
|
|
/* Loop for each column */
|
|
for (x = 0; x < nx; x++)
|
|
{
|
|
dst = dst2;
|
|
dst2 += LCD_HEIGHT/8;
|
|
data = 0;
|
|
y = 0;
|
|
|
|
if (ny > 8)
|
|
{
|
|
/* First partial row */
|
|
data = *src++ << shift;
|
|
*dst = (*dst & mask) | data;
|
|
data >>= 8;
|
|
dst++;
|
|
|
|
/* Intermediate rows */
|
|
for (y = 8; y < ny-8; y += 8)
|
|
{
|
|
data |= *src++ << shift;
|
|
*dst = (*dst & mask2) | data;
|
|
data >>= 8;
|
|
dst++;
|
|
}
|
|
}
|
|
|
|
/* Last partial row */
|
|
if (y + shift < ny)
|
|
data |= *src++ << shift;
|
|
*dst = (*dst & mask3) | (data & mask4);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Draw a rectangle with point a (upper left) at (x, y)
|
|
* and size (nx, ny)
|
|
*/
|
|
void lcd_drawrect (int x, int y, int nx, int ny)
|
|
{
|
|
lcd_drawline(x, y, nx, y);
|
|
lcd_drawline(x, ny, nx, ny);
|
|
|
|
lcd_drawline(x, y, x, ny);
|
|
lcd_drawline(nx, y, nx, ny);
|
|
}
|
|
|
|
/*
|
|
* Clear a rectangular area at (x, y), size (nx, ny)
|
|
*/
|
|
void lcd_clearrect (int x, int y, int nx, int ny)
|
|
{
|
|
int i;
|
|
for (i = 0; i < nx; i++)
|
|
lcd_bitmap (zeros, x+i, y, 1, ny, true);
|
|
}
|
|
|
|
/*
|
|
* Fill a rectangular area at (x, y), size (nx, ny)
|
|
*/
|
|
void lcd_fillrect (int x, int y, int nx, int ny)
|
|
{
|
|
int i;
|
|
for (i = 0; i < nx; i++)
|
|
lcd_bitmap (ones, x+i, y, 1, ny, true);
|
|
}
|
|
|
|
/* Invert a rectangular area at (x, y), size (nx, ny) */
|
|
void lcd_invertrect (int x, int y, int nx, int ny)
|
|
{
|
|
int i,j;
|
|
|
|
if (x>LCD_WIDTH)
|
|
return;
|
|
if (y>LCD_HEIGHT)
|
|
return;
|
|
|
|
if (x+nx>LCD_WIDTH)
|
|
nx=LCD_WIDTH-x;
|
|
if (y+ny>LCD_HEIGHT)
|
|
ny=LCD_HEIGHT-y;
|
|
|
|
for (i = 0; i < nx; i++)
|
|
for (j = 0; j < ny; j++)
|
|
INVERT_PIXEL((x+i),(y+j));
|
|
}
|
|
|
|
void lcd_drawline( int x1, int y1, int x2, int y2 )
|
|
{
|
|
int numpixels;
|
|
int i;
|
|
int deltax, deltay;
|
|
int d, dinc1, dinc2;
|
|
int x, xinc1, xinc2;
|
|
int y, yinc1, yinc2;
|
|
|
|
deltax = abs(x2 - x1);
|
|
deltay = abs(y2 - y1);
|
|
|
|
if(deltax >= deltay)
|
|
{
|
|
numpixels = deltax;
|
|
d = 2 * deltay - deltax;
|
|
dinc1 = deltay * 2;
|
|
dinc2 = (deltay - deltax) * 2;
|
|
xinc1 = 1;
|
|
xinc2 = 1;
|
|
yinc1 = 0;
|
|
yinc2 = 1;
|
|
}
|
|
else
|
|
{
|
|
numpixels = deltay;
|
|
d = 2 * deltax - deltay;
|
|
dinc1 = deltax * 2;
|
|
dinc2 = (deltax - deltay) * 2;
|
|
xinc1 = 0;
|
|
xinc2 = 1;
|
|
yinc1 = 1;
|
|
yinc2 = 1;
|
|
}
|
|
numpixels++; /* include endpoints */
|
|
|
|
if(x1 > x2)
|
|
{
|
|
xinc1 = -xinc1;
|
|
xinc2 = -xinc2;
|
|
}
|
|
|
|
if(y1 > y2)
|
|
{
|
|
yinc1 = -yinc1;
|
|
yinc2 = -yinc2;
|
|
}
|
|
|
|
x = x1;
|
|
y = y1;
|
|
|
|
for(i=0; i<numpixels; i++)
|
|
{
|
|
DRAW_PIXEL(x,y);
|
|
|
|
if(d < 0)
|
|
{
|
|
d += dinc1;
|
|
x += xinc1;
|
|
y += yinc1;
|
|
}
|
|
else
|
|
{
|
|
d += dinc2;
|
|
x += xinc2;
|
|
y += yinc2;
|
|
}
|
|
}
|
|
}
|
|
|
|
void lcd_clearline( int x1, int y1, int x2, int y2 )
|
|
{
|
|
int numpixels;
|
|
int i;
|
|
int deltax, deltay;
|
|
int d, dinc1, dinc2;
|
|
int x, xinc1, xinc2;
|
|
int y, yinc1, yinc2;
|
|
|
|
deltax = abs(x2 - x1);
|
|
deltay = abs(y2 - y1);
|
|
|
|
if(deltax >= deltay)
|
|
{
|
|
numpixels = deltax;
|
|
d = 2 * deltay - deltax;
|
|
dinc1 = deltay * 2;
|
|
dinc2 = (deltay - deltax) * 2;
|
|
xinc1 = 1;
|
|
xinc2 = 1;
|
|
yinc1 = 0;
|
|
yinc2 = 1;
|
|
}
|
|
else
|
|
{
|
|
numpixels = deltay;
|
|
d = 2 * deltax - deltay;
|
|
dinc1 = deltax * 2;
|
|
dinc2 = (deltax - deltay) * 2;
|
|
xinc1 = 0;
|
|
xinc2 = 1;
|
|
yinc1 = 1;
|
|
yinc2 = 1;
|
|
}
|
|
numpixels++; /* include endpoints */
|
|
|
|
if(x1 > x2)
|
|
{
|
|
xinc1 = -xinc1;
|
|
xinc2 = -xinc2;
|
|
}
|
|
|
|
if(y1 > y2)
|
|
{
|
|
yinc1 = -yinc1;
|
|
yinc2 = -yinc2;
|
|
}
|
|
|
|
x = x1;
|
|
y = y1;
|
|
|
|
for(i=0; i<numpixels; i++)
|
|
{
|
|
CLEAR_PIXEL(x,y);
|
|
|
|
if(d < 0)
|
|
{
|
|
d += dinc1;
|
|
x += xinc1;
|
|
y += yinc1;
|
|
}
|
|
else
|
|
{
|
|
d += dinc2;
|
|
x += xinc2;
|
|
y += yinc2;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Set a single pixel
|
|
*/
|
|
void lcd_drawpixel(int x, int y)
|
|
{
|
|
DRAW_PIXEL(x,y);
|
|
}
|
|
|
|
/*
|
|
* Clear a single pixel
|
|
*/
|
|
void lcd_clearpixel(int x, int y)
|
|
{
|
|
CLEAR_PIXEL(x,y);
|
|
}
|
|
|
|
/*
|
|
* Return width and height of a given font.
|
|
*/
|
|
void lcd_getfontsize(unsigned int font, int *width, int *height)
|
|
{
|
|
if(font < sizeof(fonts)) {
|
|
*width = fonts[font];
|
|
*height = fontheight[font];
|
|
}
|
|
}
|
|
|
|
#else
|
|
/* no LCD defined, no code to use */
|
|
#endif
|
|
|
|
void lcd_puts_scroll(int x, int y, unsigned char* string )
|
|
{
|
|
struct scrollinfo* s = &scroll;
|
|
#ifdef HAVE_LCD_CHARCELLS
|
|
s->space = 11 - x;
|
|
#else
|
|
|
|
#if defined(LCD_PROPFONTS) || defined(LOADABLE_FONTS)
|
|
unsigned char ch[2];
|
|
int w, h;
|
|
#endif
|
|
int width, height;
|
|
lcd_getfontsize(font, &width, &height);
|
|
#if defined(LCD_PROPFONTS) || defined(LOADABLE_FONTS)
|
|
ch[1] = 0; /* zero terminate */
|
|
ch[0] = string[0];
|
|
width = 0;
|
|
s->space = 0;
|
|
while ( ch[0] &&
|
|
#ifdef LCD_PROPFONTS
|
|
(width + lcd_getstringsize(ch, 0, &w, &h) <
|
|
(LCD_WIDTH - x*8))) {
|
|
#else
|
|
(width + lcd_getstringsize(ch, _font, &w, &h) <
|
|
(LCD_WIDTH - x*8))) {
|
|
#endif
|
|
width += w;
|
|
s->space++;
|
|
ch[0]=string[s->space];
|
|
}
|
|
#else
|
|
s->space = (LCD_WIDTH - xmargin - x*width) / width;
|
|
#endif
|
|
#endif
|
|
|
|
lcd_puts(x,y,string);
|
|
s->textlen = strlen(string);
|
|
if ( s->textlen > s->space ) {
|
|
s->offset=s->space;
|
|
s->startx=x;
|
|
s->starty=y;
|
|
strncpy(s->text,string,sizeof s->text);
|
|
s->text[sizeof s->text - 1] = 0;
|
|
strncpy(s->line,string,sizeof s->line);
|
|
s->line[sizeof s->line - 1] = 0;
|
|
scroll_count = 1;
|
|
}
|
|
}
|
|
|
|
void lcd_stop_scroll(void)
|
|
{
|
|
if ( scroll_count ) {
|
|
struct scrollinfo* s = &scroll;
|
|
scroll_count = 0;
|
|
|
|
#ifdef LCD_PROPFONTS
|
|
|
|
lcd_clearrect(xmargin + s->startx*fonts[font],
|
|
ymargin + s->starty*fontheight[font],
|
|
LCD_WIDTH - xmargin,
|
|
fontheight[font]);
|
|
|
|
#elif defined(LOADABLE_FONTS)
|
|
{
|
|
int w,h;
|
|
lcd_getstringsize( s->text, _font, &w, &h);
|
|
lcd_clearrect(xmargin + s->startx*w/s->textlen,
|
|
ymargin + s->starty*h,
|
|
LCD_WIDTH - xmargin,
|
|
h);
|
|
|
|
}
|
|
#endif
|
|
|
|
|
|
/* restore scrolled row */
|
|
lcd_puts(s->startx,s->starty,s->text);
|
|
lcd_update();
|
|
}
|
|
}
|
|
|
|
void lcd_scroll_pause(void)
|
|
{
|
|
scroll_count = 0;
|
|
}
|
|
|
|
void lcd_scroll_resume(void)
|
|
{
|
|
scroll_count = 1;
|
|
}
|
|
|
|
void lcd_scroll_speed(int speed)
|
|
{
|
|
scroll_speed = speed;
|
|
}
|
|
|
|
static void scroll_thread(void)
|
|
{
|
|
struct scrollinfo* s = &scroll;
|
|
|
|
while ( 1 ) {
|
|
if ( !scroll_count ) {
|
|
yield();
|
|
continue;
|
|
}
|
|
/* wait 0.5s before starting scroll */
|
|
if ( scroll_count < scroll_speed/2 )
|
|
scroll_count++;
|
|
else {
|
|
int i;
|
|
for ( i=0; i<s->space-1; i++ )
|
|
s->line[i] = s->line[i+1];
|
|
|
|
if ( s->offset < s->textlen ) {
|
|
s->line[(int)s->space - 1] = s->text[(int)s->offset];
|
|
s->offset++;
|
|
}
|
|
else {
|
|
s->line[s->space - 1] = ' ';
|
|
if ( s->offset < s->textlen + scroll_spacing - 1 )
|
|
s->offset++;
|
|
else
|
|
s->offset = 0;
|
|
}
|
|
|
|
#ifdef LCD_PROPFONTS
|
|
lcd_clearrect(xmargin + s->startx*fonts[font],
|
|
ymargin + s->starty*fontheight[font],
|
|
LCD_WIDTH - xmargin,
|
|
fontheight[font]);
|
|
#elif defined(LOADABLE_FONTS)
|
|
{
|
|
int w,h;
|
|
lcd_getstringsize( s->text, _font, &w, &h);
|
|
lcd_clearrect(xmargin + s->startx*w/s->textlen,
|
|
ymargin + s->starty*h,
|
|
LCD_WIDTH - xmargin,
|
|
h);
|
|
}
|
|
#endif
|
|
lcd_puts(s->startx,s->starty,s->line);
|
|
lcd_update();
|
|
}
|
|
sleep(HZ/scroll_speed);
|
|
}
|
|
}
|
|
|
|
|
|
/* -----------------------------------------------------------------
|
|
* local variables:
|
|
* eval: (load-file "../rockbox-mode.el")
|
|
* end:
|
|
*/
|