Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/tcc77x/c100/lcd-S6B33B2.c
Jonathan Gordon b37e6bc8c1 lcd drivers: Convert lcd_[remote_]framebuffer to a pointer 
Change all lcd drivers to using a pointer to the static framebuffer
instead of directly accessing the static array. This will let us
later do fun things like dynamic framebuffer sizes (RaaA) or
ability to use different buffers for different layers (dynamic
skin backdrops!)

Change-Id: I0a4d58a9d7b55e6c932131b929e5d4c9f9414b06
2012-02-28 11:44:59 +11:00

286 lines
7.8 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2007 by Mark Arigo
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "cpu.h"
#include "lcd.h"
#include "kernel.h"
#include "system.h"
/* Display status */
static unsigned lcd_yuv_options SHAREDBSS_ATTR = 0;
/* LCD command set for Samsung S6B33B2 */
#define R_NOP 0x00
#define R_OSCILLATION_MODE 0x02
#define R_DRIVER_OUTPUT_MODE 0x10
#define R_DCDC_SET 0x20
#define R_BIAS_SET 0x22
#define R_DCDC_CLOCK_DIV 0x24
#define R_DCDC_AMP_ONOFF 0x26
#define R_TEMP_COMPENSATION 0x28
#define R_CONTRAST_CONTROL1 0x2a
#define R_CONTRAST_CONTROL2 0x2b
#define R_STANDBY_OFF 0x2c
#define R_STANDBY_ON 0x2d
#define R_DDRAM_BURST_OFF 0x2e
#define R_DDRAM_BURST_ON 0x2f
#define R_ADDRESSING_MODE 0x30
#define R_ROW_VECTOR_MODE 0x32
#define R_N_LINE_INVERSION 0x34
#define R_FRAME_FREQ_CONTROL 0x36
#define R_RED_PALETTE 0x38
#define R_GREEN_PALETTE 0x3a
#define R_BLUE_PALETTE 0x3c
#define R_ENTRY_MODE 0x40
#define R_X_ADDR_AREA 0x42
#define R_Y_ADDR_AREA 0x43
#define R_RAM_SKIP_AREA 0x45
#define R_DISPLAY_OFF 0x50
#define R_DISPLAY_ON 0x51
#define R_SPEC_DISPLAY_PATTERN 0x53
#define R_PARTIAL_DISPLAY_MODE 0x55
#define R_PARTIAL_START_LINE 0x56
#define R_PARTIAL_END_LINE 0x57
#define R_AREA_SCROLL_MODE 0x59
#define R_SCROLL_START_LINE 0x5a
#define R_DATA_FORMAT_SELECT 0x60
/* TCC77x specific defines */
#define LCD_BASE 0x50000000
#define LCD_CMD *(volatile unsigned char*)(LCD_BASE)
#define LCD_DATA *(volatile unsigned char*)(LCD_BASE+1)
static void lcd_send_command(unsigned cmd)
{
LCD_CMD = cmd;
asm volatile (
"nop \n\t"
"nop \n\t"
"nop \n\t"
);
}
static void lcd_send_data(unsigned data)
{
LCD_DATA = (data & 0xff00) >> 8;
LCD_DATA = (data & 0x00ff);
}
/* End of TCC77x specific defines */
/* LCD init */
void lcd_init_device(void)
{
uint32_t bus_width;
/* Telechips init the same as the original firmware */
bus_width = ((MCFG >> 11) & 0x3) ^ 3;
CSCFG1 = (bus_width << 28) |
(3 << 26) | /* MTYPE = 3 */
((LCD_BASE >> 28) << 22) | /* CSBASE = 0x5 */
(1 << 20) | /* Unknown */
(2 << 11) | /* Setup time = 2 cycles */
(2 << 3) | /* Pulse width = 2+1 cycles */
(2 << 0); /* Hold time = 2 cycle */
GPIOE &= ~0x8;
sleep(HZ/100); /* 10ms */
GPIOE |= 0x08;
sleep(HZ/100); /* 10ms */
lcd_send_command(R_STANDBY_OFF);
sleep(HZ/20); /* 50ms */
lcd_send_command(R_OSCILLATION_MODE);
lcd_send_command(0x01);
sleep(HZ/100); /* 10ms */
lcd_send_command(R_DCDC_AMP_ONOFF);
lcd_send_command(0x01);
sleep(HZ/100); /* 10ms */
lcd_send_command(R_DCDC_AMP_ONOFF);
lcd_send_command(0x09);
sleep(HZ/100); /* 10ms */
lcd_send_command(R_DCDC_AMP_ONOFF);
lcd_send_command(0x0b);
sleep(HZ/100); /* 10ms */
lcd_send_command(R_DCDC_AMP_ONOFF);
lcd_send_command(0x0f);
sleep(HZ/100); /* 10ms */
lcd_send_command(R_DCDC_SET);
lcd_send_command(0x01);
sleep(HZ/100); /* 10ms */
sleep(HZ/10); /* 100ms */
lcd_send_command(R_TEMP_COMPENSATION);
lcd_send_command(0x01);
sleep(HZ/100); /* 10ms */
lcd_send_command(R_DRIVER_OUTPUT_MODE);
lcd_send_command(0x03);
lcd_send_command(R_ENTRY_MODE);
lcd_send_command(0x81);
lcd_send_command(R_N_LINE_INVERSION);
lcd_send_command(0x04);
lcd_send_command(0xfa);
lcd_send_command(0x5f);
lcd_set_contrast(0x28);
lcd_send_command(R_SPEC_DISPLAY_PATTERN);
lcd_send_command(0x0);
sleep(HZ/100); /* 10ms */
lcd_send_command(R_ADDRESSING_MODE);
lcd_send_command(0x0);
sleep(HZ/100); /* 10ms */
lcd_send_command(R_PARTIAL_DISPLAY_MODE);
lcd_send_command(0x0);
sleep(HZ/100); /* 10ms */
lcd_send_command(R_X_ADDR_AREA);
lcd_send_command(0);
lcd_send_command(0x80);
lcd_send_command(R_Y_ADDR_AREA);
lcd_send_command(0x0);
lcd_send_command(0x80);
lcd_send_command(R_DISPLAY_ON);
lcd_send_command(R_SPEC_DISPLAY_PATTERN);
lcd_send_command(0x0);
/* Rockbox init */
lcd_clear_display();
lcd_update();
}
/*** hardware configuration ***/
int lcd_default_contrast(void)
{
return 0x28;
}
void lcd_set_contrast(int val)
{
//val &= 0xFF;
lcd_send_command(R_CONTRAST_CONTROL1);
lcd_send_command(val);
}
void lcd_set_invert_display(bool yesno)
{
/* TODO: Implement lcd_set_invert_display() */
(void)yesno;
}
/* turn the display upside down (call lcd_update() afterwards) */
void lcd_set_flip(bool yesno)
{
lcd_send_command(R_DRIVER_OUTPUT_MODE);
lcd_send_command(yesno ? 0x02 : 0x07);
}
/*** update functions ***/
void lcd_yuv_set_options(unsigned options)
{
lcd_yuv_options = options;
}
/* TODO: implement me */
void lcd_blit_yuv(unsigned char *const src[3],
int src_x, int src_y, int stride,
int x, int y, int width, int height)
{
(void) src;
(void) src_x;
(void) src_y;
(void) stride;
(void) x;
(void) y;
return;
}
/* Update the display.
This must be called after all other LCD functions that change the display. */
void lcd_update(void)
{
lcd_update_rect(0, 0, LCD_WIDTH, LCD_HEIGHT);
}
/* Update a fraction of the display. */
void lcd_update_rect(int x, int y, int width, int height)
{
const fb_data *addr;
if (x + width >= LCD_WIDTH)
width = LCD_WIDTH - x;
if (y + height >= LCD_HEIGHT)
height = LCD_HEIGHT - y;
if ((width <= 0) || (height <= 0))
return; /* Nothing left to do. */
addr = FBADDR(x,y);
if (width <= 1) {
lcd_send_command(R_ENTRY_MODE); /* The X end address must be larger */
lcd_send_command(0x80); /* that the X start address, so we */
lcd_send_command(R_X_ADDR_AREA); /* switch to vertical mode for */
lcd_send_command(x); /* single column updates and set */
lcd_send_command(x + 1); /* the window width to 2 */
} else {
lcd_send_command(R_ENTRY_MODE);
lcd_send_command(0x82);
lcd_send_command(R_X_ADDR_AREA);
lcd_send_command(x);
lcd_send_command(x + width - 1);
}
lcd_send_command(R_Y_ADDR_AREA);
lcd_send_command(y);
lcd_send_command(y + height - 1);
/* NOP needed because on some c200s, the previous lcd_send_command is
interpreted as a separate command instead of part of R_Y_ADDR_AREA. */
lcd_send_command(R_NOP);
do {
int w = width;
do {
lcd_send_data(*addr++);
} while (--w > 0);
addr += LCD_WIDTH - width;
} while (--height > 0);
}
Reference in a new issue View git blame Copy permalink