rockbox/firmware/drivers/audio
2010-06-24 01:11:51 +00:00
..
ak4537.c Remove pcm_mute() which has been unused since r19308 2010-04-27 00:05:02 +00:00
as3514.c Commit FS#11364 by me. Increases the A3525v2 volume range by 7.5dB. Each volume setting gets 7.5dB louder (if you listened before at 0dB, you would have to set it to about -7.5dB to get the same volume). As a result, the new 0dB actually is pretty close to max line level for a full scale voltage, so positive dB may clip, whereas before they did not because the scale was off. Thanks to dfkt and Tim Graf for help figuring this out. 2010-06-24 01:11:51 +00:00
mas35xx.c FS#9157 - Tidy up some MAS35XX constants 2009-10-01 05:25:20 +00:00
sdl.c - Move uisimulator/sdl/*.[ch] into the target tree, under firmware/target/hosted/sdl, uisdl.c is split up across button-sdl.c and system-sdl.c. 2010-05-15 21:02:47 +00:00
tlv320.c Remove pcm_mute() which has been unused since r19308 2010-04-27 00:05:02 +00:00
tsc2100.c Remove pcm_mute() which has been unused since r19308 2010-04-27 00:05:02 +00:00
uda1341.c Fix wrongly nested commenting 2010-06-05 21:09:11 +00:00
uda1380.c Remove pcm_mute() which has been unused since r19308 2010-04-27 00:05:02 +00:00
wm8731.c FS#11417 by Joe Balough: fix audio/tuner on philips hdd6330 2010-06-19 03:51:57 +00:00
wm8751.c r25940 oops. No, no, no, that wasn't quite right. Must be truthful about the level in decidecibels for subsequent code. 2010-05-11 04:13:04 +00:00
wm8758.c Remove pcm_mute() which has been unused since r19308 2010-04-27 00:05:02 +00:00
wm8975.c Remove pcm_mute() which has been unused since r19308 2010-04-27 00:05:02 +00:00
wm8978.c Gigabeat S: Turn off hardware effects (tone and 3d) when doing digital loopback for FM recording otherwise the signal and levels are poorly represented in monitoring (can't just do ADC->DAC for general FM and get voice too). Some tweaking to input setup to improve gain a tiny bit. A little bit quieter startup too. 2010-05-26 05:13:45 +00:00
wm8985.c Submit FS#11240 by Raphael Jakse. Allows to reduce volume on WM8985 to -89 dB (e.g. used for Cowon D2). Below -57 dB the line out is affected. The manual is updated accordingly. 2010-05-30 18:29:04 +00:00