10363b3a81
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11281 a1c6a512-1295-4272-9138-f99709370657
577 lines
17 KiB
C
Executable file
577 lines
17 KiB
C
Executable file
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2004 by Linus Nielsen Feltzing
|
|
*
|
|
* All files in this archive are subject to the GNU General Public License.
|
|
* See the file COPYING in the source tree root for full license agreement.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "config.h"
|
|
|
|
#include "cpu.h"
|
|
#include "lcd.h"
|
|
#include "kernel.h"
|
|
#include "thread.h"
|
|
#include <string.h>
|
|
#include <stdlib.h>
|
|
#include "file.h"
|
|
#include "debug.h"
|
|
#include "system.h"
|
|
#include "font.h"
|
|
#include "bidi.h"
|
|
|
|
/* Power and display status */
|
|
static bool power_on = false; /* Is the power turned on? */
|
|
static bool display_on = false; /* Is the display turned on? */
|
|
|
|
/* Contrast */
|
|
static int lcd_contrast = DEFAULT_CONTRAST_SETTING << 8;
|
|
|
|
/* Reverse Flag */
|
|
#define R_DISP_CONTROL_NORMAL 0x0004
|
|
#define R_DISP_CONTROL_REV 0x0000
|
|
static unsigned short r_disp_control_rev = R_DISP_CONTROL_NORMAL;
|
|
|
|
/* Flipping */
|
|
#define Y_OFFSET_NORMAL 0
|
|
#define Y_OFFSET_FLIPPED 4
|
|
static int y_offset = 0; /* y correction for flip */
|
|
static unsigned short r_gate_scan_start_pos = 0x0002;
|
|
static unsigned short r_drv_output_control = 0x0313;
|
|
static unsigned short r_horiz_ram_addr_pos = 0x7f00;
|
|
|
|
/* Rolling */
|
|
static int roll_offset = 0; /* Amount of roll offset (0-127). */
|
|
|
|
/* Dithering */
|
|
#define R_ENTRY_MODE_SOLID 0x1038
|
|
#define R_ENTRY_MODE_DIT 0x9038
|
|
static unsigned short r_entry_mode = R_ENTRY_MODE_SOLID;
|
|
|
|
/* Forward declarations */
|
|
static void lcd_display_off(void);
|
|
|
|
/* A15(0x8000) && CS1->CS, A1(0x0002)->RS */
|
|
#define LCD_CMD *(volatile unsigned short *)0xf0008000
|
|
#define LCD_DATA *(volatile unsigned short *)0xf0008002
|
|
|
|
/* register defines for the Renesas HD66773R */
|
|
#define R_START_OSC 0x00
|
|
#define R_DEVICE_CODE_READ 0x00
|
|
#define R_DRV_OUTPUT_CONTROL 0x01
|
|
#define R_DRV_AC_CONTROL 0x02
|
|
#define R_POWER_CONTROL1 0x03
|
|
#define R_POWER_CONTROL2 0x04
|
|
#define R_ENTRY_MODE 0x05
|
|
#define R_COMPARE_REG 0x06
|
|
#define R_DISP_CONTROL 0x07
|
|
#define R_FRAME_CYCLE_CONTROL 0x0b
|
|
#define R_POWER_CONTROL3 0x0c
|
|
#define R_POWER_CONTROL4 0x0d
|
|
#define R_POWER_CONTROL5 0x0e
|
|
#define R_GATE_SCAN_START_POS 0x0f
|
|
#define R_VERT_SCROLL_CONTROL 0x11
|
|
#define R_1ST_SCR_DRV_POS 0x14
|
|
#define R_2ND_SCR_DRV_POS 0x15
|
|
#define R_HORIZ_RAM_ADDR_POS 0x16
|
|
#define R_VERT_RAM_ADDR_POS 0x17
|
|
#define R_RAM_WRITE_DATA_MASK 0x20
|
|
#define R_RAM_ADDR_SET 0x21
|
|
#define R_WRITE_DATA_2_GRAM 0x22
|
|
#define R_RAM_READ_DATA 0x22
|
|
#define R_GAMMA_FINE_ADJ_POS1 0x30
|
|
#define R_GAMMA_FINE_ADJ_POS2 0x31
|
|
#define R_GAMMA_FINE_ADJ_POS3 0x32
|
|
#define R_GAMMA_GRAD_ADJ_POS 0x33
|
|
#define R_GAMMA_FINE_ADJ_NEG1 0x34
|
|
#define R_GAMMA_FINE_ADJ_NEG2 0x35
|
|
#define R_GAMMA_FINE_ADJ_NEG3 0x36
|
|
#define R_GAMMA_GRAD_ADJ_NEG 0x37
|
|
#define R_GAMMA_AMP_ADJ_POS 0x3a
|
|
#define R_GAMMA_AMP_ADJ_NEG 0x3b
|
|
|
|
/* called very frequently - inline! */
|
|
static inline void lcd_write_reg(int reg, int val)
|
|
{
|
|
LCD_CMD = 0x0000; /* MSB is ~always~ 0 */
|
|
LCD_CMD = reg << 1;
|
|
LCD_DATA = (val >> 8) << 1;
|
|
LCD_DATA = val << 1;
|
|
}
|
|
|
|
/* called very frequently - inline! */
|
|
static inline void lcd_begin_write_gram(void)
|
|
{
|
|
LCD_CMD = 0x0000;
|
|
LCD_CMD = R_WRITE_DATA_2_GRAM << 1;
|
|
}
|
|
|
|
/* set hard dither mode on/off */
|
|
static void hw_dither(bool on)
|
|
{
|
|
/* DIT=x, BGR=1, HWM=0, I/D1-0=11, AM=1, LG2-0=000 */
|
|
r_entry_mode = on ? R_ENTRY_MODE_DIT : R_ENTRY_MODE_SOLID;
|
|
lcd_write_reg(R_ENTRY_MODE, r_entry_mode);
|
|
}
|
|
|
|
/*** hardware configuration ***/
|
|
|
|
int lcd_default_contrast(void)
|
|
{
|
|
return DEFAULT_CONTRAST_SETTING;
|
|
}
|
|
|
|
void lcd_set_contrast(int val)
|
|
{
|
|
/* Clamp val in range 0-14, 16-30 */
|
|
if (val < 1)
|
|
val = 0;
|
|
else if (val <= 15)
|
|
--val;
|
|
else if (val > 30)
|
|
val = 30;
|
|
|
|
lcd_contrast = val << 8;
|
|
|
|
if (!power_on)
|
|
return;
|
|
|
|
/* VCOMG=1, VDV4-0=xxxxx, VCM4-0=11000 */
|
|
lcd_write_reg(R_POWER_CONTROL5, 0x2018 | lcd_contrast);
|
|
}
|
|
|
|
void lcd_set_invert_display(bool yesno)
|
|
{
|
|
r_disp_control_rev = yesno ? R_DISP_CONTROL_REV :
|
|
R_DISP_CONTROL_NORMAL;
|
|
|
|
if (!display_on)
|
|
return;
|
|
|
|
/* PT1-0=00, VLE2-1=00, SPT=0, GON=1, DTE=1, REV=x, D1-0=11 */
|
|
lcd_write_reg(R_DISP_CONTROL, 0x0033 | r_disp_control_rev);
|
|
}
|
|
|
|
/* turn the display upside down (call lcd_update() afterwards) */
|
|
void lcd_set_flip(bool yesno)
|
|
{
|
|
if (yesno)
|
|
{
|
|
y_offset = Y_OFFSET_FLIPPED;
|
|
r_gate_scan_start_pos = 0x0000;
|
|
r_drv_output_control = 0x0013;
|
|
r_horiz_ram_addr_pos = 0x8304;
|
|
}
|
|
else
|
|
{
|
|
y_offset = Y_OFFSET_NORMAL;
|
|
r_gate_scan_start_pos = 0x0002;
|
|
r_drv_output_control = 0x0313;
|
|
r_horiz_ram_addr_pos = 0x7f00;
|
|
}
|
|
|
|
if (!power_on)
|
|
return;
|
|
|
|
/* SCN4-0=000x0 (G1/G160) */
|
|
lcd_write_reg(R_GATE_SCAN_START_POS, r_gate_scan_start_pos);
|
|
/* SM=0, GS=x, SS=x, NL4-0=10011 (G1-G160)*/
|
|
lcd_write_reg(R_DRV_OUTPUT_CONTROL, r_drv_output_control);
|
|
/* HEA7-0=0xxx, HSA7-0=0xxx */
|
|
lcd_write_reg(R_HORIZ_RAM_ADDR_POS, r_horiz_ram_addr_pos);
|
|
}
|
|
|
|
/* Rolls up the lcd display by the specified amount of lines.
|
|
* Lines that are rolled out over the top of the screen are
|
|
* rolled in from the bottom again. This is a hardware
|
|
* remapping only and all operations on the lcd are affected.
|
|
* ->
|
|
* @param int lines - The number of lines that are rolled.
|
|
* The value must be 0 <= pixels < LCD_HEIGHT.
|
|
* Call lcd_update() afterwards */
|
|
void lcd_roll(int lines)
|
|
{
|
|
/* Just allow any value mod LCD_HEIGHT-1. Assumes LCD_HEIGHT == 128. */
|
|
if (lines < 0)
|
|
lines = -lines & 127;
|
|
else
|
|
lines = (128 - (lines & 127)) & 127;
|
|
|
|
roll_offset = lines;
|
|
}
|
|
|
|
static void lcd_power_on(void)
|
|
{
|
|
/* Be sure standby bit is clear. */
|
|
/* BT2-0=000, DC2-0=000, AP2-0=000, SLP=0, STB=0 */
|
|
lcd_write_reg(R_POWER_CONTROL1, 0x0000);
|
|
|
|
/** Power ON Sequence **/
|
|
/* Per datasheet Rev.1.10, Jun.21.2003, p. 99 */
|
|
|
|
lcd_write_reg(R_START_OSC, 0x0001); /* Start Oscillation */
|
|
/* 10ms or more for oscillation circuit to stabilize */
|
|
sleep(HZ/50);
|
|
/* Instruction (1) for power setting; VC2-0, VRH3-0, CAD,
|
|
VRL3-0, VCM4-0, VDV4-0 */
|
|
/* VC2-0=001 */
|
|
lcd_write_reg(R_POWER_CONTROL3, 0x0001);
|
|
/* VRL3-0=0100, PON=0, VRH3-0=0001 */
|
|
lcd_write_reg(R_POWER_CONTROL4, 0x0401);
|
|
/* CAD=1 */
|
|
lcd_write_reg(R_POWER_CONTROL2, 0x8000);
|
|
/* VCOMG=0, VDV4-0=xxxxx, VCM4-0=11000 */
|
|
lcd_write_reg(R_POWER_CONTROL5, 0x0018 | lcd_contrast);
|
|
/* Instruction (2) for power setting; BT2-0, DC2-0, AP2-0 */
|
|
/* BT2-0=000, DC2-0=001, AP2-0=011, SLP=0, STB=0 */
|
|
lcd_write_reg(R_POWER_CONTROL1, 0x002c);
|
|
/* Instruction (3) for power setting; VCOMG = "1" */
|
|
/* VCOMG=1, VDV4-0=xxxxx, VCM4-0=11000 */
|
|
lcd_write_reg(R_POWER_CONTROL5, 0x2018 | lcd_contrast);
|
|
|
|
/* 40ms or more; time for step-up circuits 1,2 to stabilize */
|
|
sleep(HZ/25);
|
|
|
|
/* Instruction (4) for power setting; PON = "1" */
|
|
/* VRL3-0=0100, PON=1, VRH3-0=0001 */
|
|
lcd_write_reg(R_POWER_CONTROL4, 0x0411);
|
|
|
|
/* 40ms or more; time for step-up circuit 4 to stabilize */
|
|
sleep(HZ/25);
|
|
|
|
/* Instructions for other mode settings (in register order). */
|
|
/* SM=0, GS=x, SS=x, NL4-0=10011 (G1-G160)*/
|
|
lcd_write_reg(R_DRV_OUTPUT_CONTROL, r_drv_output_control);
|
|
/* FLD1-0=01 (1 field), B/C=1, EOR=1 (C-pat), NW5-0=000000 (1 row) */
|
|
lcd_write_reg(R_DRV_AC_CONTROL, 0x0700);
|
|
/* DIT=x, BGR=1, HWM=0, I/D1-0=11, AM=1, LG2-0=000 */
|
|
lcd_write_reg(R_ENTRY_MODE, r_entry_mode);
|
|
/* CP15-0=0000000000000000 */
|
|
lcd_write_reg(R_COMPARE_REG, 0x0000);
|
|
/* NO1-0=01, SDT1-0=00, EQ1-0=00, DIV1-0=00, RTN3-00000 */
|
|
lcd_write_reg(R_FRAME_CYCLE_CONTROL, 0x4000);
|
|
/* SCN4-0=000x0 (G1/G160) */
|
|
lcd_write_reg(R_GATE_SCAN_START_POS, r_gate_scan_start_pos);
|
|
/* VL7-0=0x00 */
|
|
lcd_write_reg(R_VERT_SCROLL_CONTROL, 0x0000);
|
|
/* SE17-10(End)=0x9f (159), SS17-10(Start)=0x00 */
|
|
lcd_write_reg(R_1ST_SCR_DRV_POS, 0x9f00);
|
|
/* SE27-20(End)=0x5c (92), SS27-20(Start)=0x00 */
|
|
lcd_write_reg(R_2ND_SCR_DRV_POS, 0x5c00);
|
|
/* HEA7-0=0xxx, HSA7-0=0xxx */
|
|
lcd_write_reg(R_HORIZ_RAM_ADDR_POS, r_horiz_ram_addr_pos);
|
|
/* PKP12-10=0x0, PKP02-00=0x0 */
|
|
lcd_write_reg(R_GAMMA_FINE_ADJ_POS1, 0x0003);
|
|
/* PKP32-30=0x4, PKP22-20=0x0 */
|
|
lcd_write_reg(R_GAMMA_FINE_ADJ_POS2, 0x0400);
|
|
/* PKP52-50=0x4, PKP42-40=0x7 */
|
|
lcd_write_reg(R_GAMMA_FINE_ADJ_POS3, 0x0407);
|
|
/* PRP12-10=0x3, PRP02-00=0x5 */
|
|
lcd_write_reg(R_GAMMA_GRAD_ADJ_POS, 0x0305);
|
|
/* PKN12-10=0x0, PKN02-00=0x3 */
|
|
lcd_write_reg(R_GAMMA_FINE_ADJ_NEG1, 0x0003);
|
|
/* PKN32-30=0x7, PKN22-20=0x4 */
|
|
lcd_write_reg(R_GAMMA_FINE_ADJ_NEG2, 0x0704);
|
|
/* PKN52-50=0x4, PRN42-40=0x7 */
|
|
lcd_write_reg(R_GAMMA_FINE_ADJ_NEG3, 0x0407);
|
|
/* PRN12-10=0x5, PRN02-00=0x3 */
|
|
lcd_write_reg(R_GAMMA_GRAD_ADJ_NEG, 0x0503);
|
|
/* VRP14-10=0x14, VRP03-00=0x09 */
|
|
lcd_write_reg(R_GAMMA_AMP_ADJ_POS, 0x1409);
|
|
/* VRN14-00=0x06, VRN03-00=0x02 */
|
|
lcd_write_reg(R_GAMMA_AMP_ADJ_NEG, 0x0602);
|
|
|
|
/* 100ms or more; time for step-up circuits to stabilize */
|
|
sleep(HZ/10);
|
|
|
|
power_on = true;
|
|
}
|
|
|
|
static void lcd_power_off(void)
|
|
{
|
|
/* Display must be off first */
|
|
if (display_on)
|
|
lcd_display_off();
|
|
|
|
power_on = false;
|
|
|
|
/** Power OFF sequence **/
|
|
/* Per datasheet Rev.1.10, Jun.21.2003, p. 99 */
|
|
|
|
/* Step-up1 halt setting bit */
|
|
/* BT2-0=110, DC2-0=001, AP2-0=011, SLP=0, STB=0 */
|
|
lcd_write_reg(R_POWER_CONTROL1, 0x062c);
|
|
/* Step-up3,4 halt setting bit */
|
|
/* VRL3-0=0100, PON=0, VRH3-0=0001 */
|
|
lcd_write_reg(R_POWER_CONTROL4, 0x0401);
|
|
/* VCOMG=0, VDV4-0=xxxxx, VCM4-0=11000 */
|
|
lcd_write_reg(R_POWER_CONTROL5, 0x0018 | lcd_contrast);
|
|
|
|
/* Wait 100ms or more */
|
|
sleep(HZ/10);
|
|
|
|
/* Step-up2,amp halt setting bit */
|
|
/* BT2-0=000, DC2-0=000, AP2-0=000, SLP=0, STB=0 */
|
|
lcd_write_reg(R_POWER_CONTROL1, 0x0000);
|
|
}
|
|
|
|
static void lcd_display_on(void)
|
|
{
|
|
/* Be sure power is on first */
|
|
if (!power_on)
|
|
lcd_power_on();
|
|
|
|
/** Display ON Sequence **/
|
|
/* Per datasheet Rev.1.10, Jun.21.2003, p. 97 */
|
|
|
|
/* PT1-0=00, VLE2-1=00, SPT=0, GON=0, DTE=0, REV=0, D1-0=01 */
|
|
lcd_write_reg(R_DISP_CONTROL, 0x0001);
|
|
|
|
sleep(HZ/25); /* Wait 2 frames or more */
|
|
|
|
/* PT1-0=00, VLE2-1=00, SPT=0, GON=1, DTE=0, REV=x, D1-0=01 */
|
|
lcd_write_reg(R_DISP_CONTROL, 0x0021 | r_disp_control_rev);
|
|
/* PT1-0=00, VLE2-1=00, SPT=0, GON=1, DTE=0, REV=x, D1-0=11 */
|
|
lcd_write_reg(R_DISP_CONTROL, 0x0023 | r_disp_control_rev);
|
|
|
|
sleep(HZ/25); /* Wait 2 frames or more */
|
|
|
|
/* PT1-0=00, VLE2-1=00, SPT=0, GON=1, DTE=1, REV=x, D1-0=11 */
|
|
lcd_write_reg(R_DISP_CONTROL, 0x0033 | r_disp_control_rev);
|
|
|
|
display_on = true;
|
|
}
|
|
|
|
static void lcd_display_off(void)
|
|
{
|
|
display_on = false;
|
|
|
|
/** Display OFF sequence **/
|
|
/* Per datasheet Rev.1.10, Jun.21.2003, p. 97 */
|
|
|
|
/* EQ1-0=00 already */
|
|
|
|
/* PT1-0=00, VLE2-1=00, SPT=0, GON=1, DTE=1, REV=x, D1-0=10 */
|
|
lcd_write_reg(R_DISP_CONTROL, 0x0032 | r_disp_control_rev);
|
|
|
|
sleep(HZ/25); /* Wait 2 frames or more */
|
|
|
|
/* PT1-0=00, VLE2-1=00, SPT=0, GON=1, DTE=0, REV=x, D1-0=10 */
|
|
lcd_write_reg(R_DISP_CONTROL, 0x0022 | r_disp_control_rev);
|
|
|
|
sleep(HZ/25); /* Wait 2 frames or more */
|
|
|
|
/* PT1-0=00, VLE2-1=00, SPT=0, GON=0, DTE=0, REV=0, D1-0=00 */
|
|
lcd_write_reg(R_DISP_CONTROL, 0x0000);
|
|
}
|
|
|
|
/* LCD init */
|
|
void lcd_init_device(void)
|
|
{
|
|
#ifdef BOOTLOADER
|
|
/* Initial boot requires power on reset and setting up chip
|
|
registers but a full reset is not needed again. */
|
|
|
|
/* LCD Reset */
|
|
and_l(~0x00000010, &GPIO1_OUT);
|
|
or_l(0x00000010, &GPIO1_ENABLE);
|
|
or_l(0x00000010, &GPIO1_FUNCTION);
|
|
sleep(HZ/100);
|
|
or_l(0x00000010, &GPIO1_OUT);
|
|
|
|
sleep(HZ/100);
|
|
|
|
lcd_display_on();
|
|
#else
|
|
/* Power and display already ON - reset settings */
|
|
power_on = true;
|
|
display_on = true;
|
|
lcd_set_contrast(DEFAULT_CONTRAST_SETTING);
|
|
lcd_set_invert_display(false);
|
|
lcd_set_flip(false);
|
|
lcd_roll(0);
|
|
hw_dither(false); /* do this or all bootloaders will need reflashing */
|
|
#endif
|
|
}
|
|
|
|
void lcd_enable(bool on)
|
|
{
|
|
if (on == display_on)
|
|
return;
|
|
|
|
if (on)
|
|
{
|
|
lcd_display_on();
|
|
/* Probably out of sync and we don't wanna pepper the code with
|
|
lcd_update() calls for this. */
|
|
lcd_update();
|
|
}
|
|
else
|
|
{
|
|
lcd_display_off();
|
|
}
|
|
}
|
|
|
|
void lcd_sleep(void)
|
|
{
|
|
if (power_on)
|
|
lcd_power_off();
|
|
|
|
/* Set standby mode */
|
|
/* BT2-0=000, DC2-0=000, AP2-0=000, SLP=0, STB=1 */
|
|
lcd_write_reg(R_POWER_CONTROL1, 0x0001);
|
|
}
|
|
|
|
/*** update functions ***/
|
|
|
|
/* Performance function that works with an external buffer
|
|
note that by and bheight are in 8-pixel units! */
|
|
void lcd_blit(const fb_data* data, int x, int by, int width,
|
|
int bheight, int stride)
|
|
{
|
|
/* TODO: Implement lcd_blit() */
|
|
(void)data;
|
|
(void)x;
|
|
(void)by;
|
|
(void)width;
|
|
(void)bheight;
|
|
(void)stride;
|
|
/*if(display_on)*/
|
|
}
|
|
|
|
/* Line write helper function for lcd_yuv_blit. Write two lines of yuv420.
|
|
* y should have two lines of Y back to back.
|
|
* bu and rv should contain the Cb and Cr data for the two lines of Y.
|
|
* Stores bu, guv and rv in repective buffers for use in second line.
|
|
*/
|
|
extern void lcd_write_yuv420_lines(const unsigned char *y,
|
|
unsigned char *bu, unsigned char *guv, unsigned char *rv,
|
|
int width);
|
|
|
|
/* Performance function to blit a YUV bitmap directly to the LCD
|
|
* src_x, src_y, width and height should be even and within the LCD's
|
|
* boundaries.
|
|
*/
|
|
void lcd_yuv_blit(unsigned char * const src[3],
|
|
int src_x, int src_y, int stride,
|
|
int x, int y, int width, int height)
|
|
{
|
|
/* IRAM Y, Cb/bu, guv and Cb/rv buffers. */
|
|
unsigned char y_ibuf[LCD_WIDTH*2];
|
|
unsigned char bu_ibuf[LCD_WIDTH/2];
|
|
unsigned char guv_ibuf[LCD_WIDTH/2];
|
|
unsigned char rv_ibuf[LCD_WIDTH/2];
|
|
const unsigned char *ysrc, *usrc, *vsrc;
|
|
const unsigned char *ysrc_max;
|
|
|
|
if (!display_on)
|
|
return;
|
|
|
|
if (r_entry_mode == R_ENTRY_MODE_SOLID)
|
|
hw_dither(true);
|
|
|
|
width = (width + 1) & ~1;
|
|
height = (height + 1) & ~1;
|
|
|
|
/* Set start position and window */
|
|
lcd_write_reg(R_RAM_ADDR_SET, (x << 8) |
|
|
(((y + roll_offset) & 127) + y_offset));
|
|
lcd_write_reg(R_VERT_RAM_ADDR_POS, ((x + width - 1) << 8) | x);
|
|
|
|
lcd_begin_write_gram();
|
|
|
|
ysrc = src[0] + src_y*stride + src_x;
|
|
usrc = src[1] + (src_y*stride >> 2) + (src_x >> 1);
|
|
vsrc = src[2] + (usrc - src[1]);
|
|
ysrc_max = ysrc + height*stride;
|
|
|
|
do
|
|
{
|
|
memcpy(y_ibuf, ysrc, width);
|
|
memcpy(&y_ibuf[width], &ysrc[stride], width);
|
|
memcpy(bu_ibuf, usrc, width >> 1);
|
|
memcpy(rv_ibuf, vsrc, width >> 1);
|
|
lcd_write_yuv420_lines(y_ibuf, bu_ibuf, guv_ibuf, rv_ibuf, width);
|
|
ysrc += stride << 1;
|
|
usrc += stride >> 1;
|
|
vsrc += stride >> 1;
|
|
}
|
|
while (ysrc < ysrc_max);
|
|
} /* lcd_yuv_blit */
|
|
|
|
|
|
/* Update the display.
|
|
This must be called after all other LCD functions that change the
|
|
lcd frame buffer. */
|
|
void lcd_update(void)
|
|
{
|
|
if (!display_on)
|
|
return;
|
|
|
|
if (r_entry_mode == R_ENTRY_MODE_DIT)
|
|
hw_dither(false);
|
|
|
|
/* Set start position and window */
|
|
/* Just add roll offset to start address. CP will roll back around. */
|
|
lcd_write_reg(R_RAM_ADDR_SET, y_offset + roll_offset); /* X == 0 */
|
|
lcd_write_reg(R_VERT_RAM_ADDR_POS, (LCD_WIDTH-1) << 8);
|
|
|
|
lcd_begin_write_gram();
|
|
|
|
lcd_write_data((unsigned short *)lcd_framebuffer,
|
|
LCD_WIDTH*LCD_HEIGHT);
|
|
} /* lcd_update */
|
|
|
|
/* Update a fraction of the display. */
|
|
void lcd_update_rect(int x, int y, int width, int height)
|
|
{
|
|
int ymax;
|
|
const unsigned short *ptr;
|
|
|
|
if (!display_on)
|
|
return;
|
|
|
|
if (r_entry_mode == R_ENTRY_MODE_DIT)
|
|
hw_dither(false);
|
|
|
|
if (x + width > LCD_WIDTH)
|
|
width = LCD_WIDTH - x; /* Clip right */
|
|
if (x < 0)
|
|
width += x, x = 0; /* Clip left */
|
|
if (width <= 0)
|
|
return; /* nothing left to do */
|
|
|
|
ymax = y + height;
|
|
if (ymax > LCD_HEIGHT)
|
|
ymax = LCD_HEIGHT; /* Clip bottom */
|
|
if (y < 0)
|
|
y = 0; /* Clip top */
|
|
if (y >= ymax)
|
|
return; /* nothing left to do */
|
|
|
|
/* Set start position and window */
|
|
lcd_write_reg(R_RAM_ADDR_SET, (x << 8) |
|
|
(((y + roll_offset) & 127) + y_offset));
|
|
lcd_write_reg(R_VERT_RAM_ADDR_POS, ((x + width - 1) << 8) | x);
|
|
|
|
lcd_begin_write_gram();
|
|
|
|
ptr = (unsigned short *)&lcd_framebuffer[y][x];
|
|
|
|
do
|
|
{
|
|
lcd_write_data(ptr, width);
|
|
ptr += LCD_WIDTH;
|
|
}
|
|
while (++y < ymax);
|
|
} /* lcd_update_rect */
|