Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/export/config/sansafuzev2.h
Rafaël Carré f8f3fab62c as3525 usb: build as3525v2 file based on CONFIG_USBOTG, and fix warnings 
build it on fuzev2 and clipv2 too, it should be the same controller
as3525v1 file is only build for CONFIG_USBOTG == USBOTG_AS3525, no need
to check for it in the .c file

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26142 a1c6a512-1295-4272-9138-f99709370657
2010-05-18 12:56:14 +00:00

210 lines
5.7 KiB
C
Raw Blame History

/*
* This config file is for the Sandisk Sansa Fuze v2
*/
#define TARGET_TREE /* this target is using the target tree system */
/* For Rolo and boot loader */
#define MODEL_NUMBER 68
#define MODEL_NAME "Sandisk Sansa Fuze v2"
#define HW_SAMPR_CAPS SAMPR_CAP_ALL
/* define this if you have recording possibility */
#define HAVE_RECORDING
#define REC_SAMPR_CAPS SAMPR_CAP_ALL
/* Default recording levels */
#define DEFAULT_REC_MIC_GAIN 23
#define DEFAULT_REC_LEFT_GAIN 23
#define DEFAULT_REC_RIGHT_GAIN 23
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
#ifndef BOOTLOADER/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you have access to the pitchscreen */
#define HAVE_PITCHSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* define this if you have LCD enable function */
//#define HAVE_LCD_ENABLE
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
should be defined as well.
#define HAVE_LCD_SLEEP
#define HAVE_LCD_SLEEP_SETTING
*/
/* define this if you can flip your LCD */
//#define HAVE_LCD_FLIP
/* define this if you can invert the colours on your LCD */
//#define HAVE_LCD_INVERT
/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_AS3514
/* There is no hardware tone control */
#define HAVE_SW_TONE_CONTROLS
/* define this if the unit uses a scrollwheel for navigation */
#define HAVE_SCROLLWHEEL
/* define to activate advanced wheel acceleration code */
#define HAVE_WHEEL_ACCELERATION
/* define from which rotation speed [degree/sec] on the acceleration starts */
#define WHEEL_ACCEL_START 540
/* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
#define WHEEL_ACCELERATION 1
#endif /* !BOOTLOADER */
/* put the lcd frame buffer in IRAM */
#define IRAM_LCDFRAMEBUFFER //IBSS_ATTR
#define CONFIG_KEYPAD SANSA_FUZE_PAD
/* Define this to enable morse code input */
#define HAVE_MORSE_INPUT
/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC
/* LCD dimensions */
#define LCD_WIDTH 220
#define LCD_HEIGHT 176
#define LCD_DEPTH 16 /* 65536 colours */
#define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 swapped */
/* AS3514 or newer */
#define HAVE_AS3514
#define HAVE_AS3543
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* Some Sansa Fuzes seem to be FAT16 formatted */
#define HAVE_FAT16SUPPORT
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE (0x100000-0x8000)
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000
#define AB_REPEAT_ENABLE 1
/* FM Tuner - suspected to be the SI4702 */
#define CONFIG_TUNER SI4700
/* #define HAVE_TUNER_PWR_CTRL */
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS
/* Main LCD backlight brightness range and defaults */
#define MIN_BRIGHTNESS_SETTING 1
#define MAX_BRIGHTNESS_SETTING 25
#define DEFAULT_BRIGHTNESS_SETTING 6
/* define this if you have a light associated with the buttons */
#define HAVE_BUTTON_LIGHT
/* Which backlight fading type? */
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
/* define this if you have a flash memory storage */
#define HAVE_FLASH_STORAGE
/* define this if the flash memory uses the SecureDigital Memory Card protocol */
#define CONFIG_STORAGE STORAGE_SD
#define BATTERY_CAPACITY_DEFAULT 550 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 550 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 550 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
/* Charging implemented in a target-specific algorithm */
#define CONFIG_CHARGING CHARGING_TARGET
/* define this if the unit can be powered or charged via USB */
#define HAVE_USB_POWER
/* Define this if you have an AMS AS3525v2 */
#define CONFIG_CPU AS3525v2
/* Define this if you want to use the AS2525 i2c interface */
#define CONFIG_I2C I2C_AS3525
/* define current usage levels (based on battery bench) */
#define CURRENT_NORMAL 30
#define CURRENT_BACKLIGHT 30
#define CURRENT_RECORD CURRENT_NORMAL
/* Define this to the CPU frequency */
#define CPU_FREQ 240000000
/* Type of LCD */
#define CONFIG_LCD LCD_FUZE
/* Offset ( in the firmware file's header ) to the file CRC and data. These are
only used when loading the old format rockbox.e200 file */
#define FIRMWARE_OFFSET_FILE_CRC 0x0
#define FIRMWARE_OFFSET_FILE_DATA 0x8
#ifndef BOOTLOADER
#define HAVE_MULTIDRIVE
#define NUM_DRIVES 2
#define HAVE_HOTSWAP
#endif
#ifndef BOOTLOADER
#define USB_HANDLED_BY_OF
/* USB On-the-go */
#define CONFIG_USBOTG USBOTG_AS3525v2
/* enable these for the experimental usb stack */
#define HAVE_USBSTACK
#define USB_VENDOR_ID 0x0781
#define USB_PRODUCT_ID 0x74c3 /* MSC = 0x74c3, MTP = 0x74c2 */
#endif /* !BOOTLOADER */
/* Define this if you have adjustable CPU frequency */
//#define HAVE_ADJUSTABLE_CPU_FREQ
#define BOOTFILE_EXT "sansa"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
#define ICODE_ATTR_TREMOR_NOT_MDCT
#define INCLUDE_TIMEOUT_API
/* Define this if a programmable hotkey is mapped */
#define HAVE_HOTKEY
Reference in a new issue View git blame Copy permalink