| .. |
|
adc.h
|
|
|
|
arcotg_udc.h
|
Usb Stack: only setup packet handling, and not enabled by default as there is a lot to do.
|
2007-08-27 16:04:32 +00:00 |
|
as3514.h
|
Sansa c200 port. Rockbox works with sound. Several features are disabled including some lcd options, FM radio, recording, and all plugins. Loading the OF from the Rockbox bootloader does not work.
|
2007-09-06 03:28:58 +00:00 |
|
ata.h
|
|
|
|
ata_idle_notify.h
|
|
|
|
ata_mmc.h
|
|
|
|
audio.h
|
Even more optimizing for the recording name change...
|
2007-08-02 18:45:38 +00:00 |
|
audiohw.h
|
Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks.
|
2007-09-21 15:51:53 +00:00 |
|
backlight.h
|
Removed special X5 backlight handling, and replaced it with a generic system that makes the backlight light up on shutdown and not time out unless it's completely disabled in the current player state.
|
2007-08-12 11:18:52 +00:00 |
|
bidi.h
|
|
|
|
bitswap.h
|
|
|
|
buffer.h
|
|
|
|
button.h
|
IRQ driven touchpad driver, crude but working
|
2007-09-30 11:15:14 +00:00 |
|
config-c200.h
|
Enabled button light for Sansa C200
|
2007-09-25 20:24:38 +00:00 |
|
config-e200.h
|
Firmware "hacker" code for the e200r install so the full bootloader rom doesnt need to be written.
|
2007-09-09 11:20:20 +00:00 |
|
config-fmrecorder.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-gigabeat-s.h
|
Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks.
|
2007-09-21 15:51:53 +00:00 |
|
config-gigabeat.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-h10.h
|
Increase Max settable battery capacity for the H10, closes FS#7795
|
2007-09-18 21:10:47 +00:00 |
|
config-h10_5gb.h
|
Add the define for the usb stack (in comment) on targets that can be used for it.
|
2007-08-29 00:20:01 +00:00 |
|
config-h100.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-h120.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-h300.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-iaudiom5.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-iaudiox5.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-ifp7xx.h
|
Disable tagcache on iriver iFP to save some memory.
|
2007-09-20 22:16:08 +00:00 |
|
config-ipod1g2g.h
|
Fix the LCD line remaining active after shutdown on grayscale ipods (FS#5199). Original patch by Tomasz Mon, modified by me.
|
2007-09-29 20:56:07 +00:00 |
|
config-ipod3g.h
|
Fix the LCD line remaining active after shutdown on grayscale ipods (FS#5199). Original patch by Tomasz Mon, modified by me.
|
2007-09-29 20:56:07 +00:00 |
|
config-ipod4g.h
|
Fix the LCD line remaining active after shutdown on grayscale ipods (FS#5199). Original patch by Tomasz Mon, modified by me.
|
2007-09-29 20:56:07 +00:00 |
|
config-ipodcolor.h
|
Accept patch in FS#6869 by Justin Foell, increases maximum settable battery capacity to 1200 mAh for ipod color and 4g, closes FS#6422
|
2007-09-02 07:31:10 +00:00 |
|
config-ipodmini.h
|
Fix the LCD line remaining active after shutdown on grayscale ipods (FS#5199). Original patch by Tomasz Mon, modified by me.
|
2007-09-29 20:56:07 +00:00 |
|
config-ipodmini2g.h
|
Fix the LCD line remaining active after shutdown on grayscale ipods (FS#5199). Original patch by Tomasz Mon, modified by me.
|
2007-09-29 20:56:07 +00:00 |
|
config-ipodnano.h
|
Add the define for the usb stack (in comment) on targets that can be used for it.
|
2007-08-29 00:20:01 +00:00 |
|
config-ipodvideo.h
|
Add the define for the usb stack (in comment) on targets that can be used for it.
|
2007-08-29 00:20:01 +00:00 |
|
config-mrobe500.h
|
Make sure that SVN keywords are set properly
|
2007-09-22 15:43:38 +00:00 |
|
config-ondiofm.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-ondiosp.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-player.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-recorder.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-recorderv2.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-tpj1022.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config.h
|
Anti-red?
|
2007-09-29 06:56:21 +00:00 |
|
config_caps.h
|
|
|
|
cpu.h
|
Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks.
|
2007-09-21 15:51:53 +00:00 |
|
debug.h
|
|
|
|
disk.h
|
|
|
|
dm320.h
|
Working DM320 interrupts, changed the way registers are accessed in spi and uart drivers. Uart might be broken with interrupts - buttons on remote don't seem to respond when interrupts are enabled.
|
2007-09-23 23:08:39 +00:00 |
|
ds2411.h
|
|
|
|
eeprom_24cxx.h
|
|
|
|
eeprom_settings.h
|
|
|
|
enc_base.h
|
|
|
|
fat.h
|
|
|
|
fmradio.h
|
|
|
|
fmradio_i2c.h
|
|
|
|
font.h
|
Tab police
|
2007-09-14 16:04:01 +00:00 |
|
gdb_api.h
|
|
|
|
general.h
|
|
|
|
generic_i2c.h
|
|
|
|
hangul.h
|
|
|
|
hotswap.h
|
Some rewriting of the e200 ata driver. No more panicing. Faster card multiplexing. Some calculated yielding (further tuneable if needed). Hopefully more reliable in general. Easy revert if rebellious.
|
2007-07-25 06:15:07 +00:00 |
|
hwcompat.h
|
Remove the hack which read the ipod hardware revision from flash in the bootloader and passed it to Rockbox via a fixed address in SDRAM. Rockbox now remaps flash and so can just read the value itself. Also clean up the debug menu a little - only display the hw revision for ipods, and add the lcd_type variable to indicate the type of LCD (0 or 1) for ipod Color/Photo.
|
2007-07-25 13:12:38 +00:00 |
|
i2c-coldfire.h
|
|
|
|
i2c-pp.h
|
|
|
|
i2c.h
|
|
|
|
i2s.h
|
Reenable scaling on Sansa since a reasonable solution to clicks has been found.
|
2007-07-26 10:46:17 +00:00 |
|
id3.h
|
Remove the ID3 tag version priority setting on the grounds of it being pretty pointless. ID3v2 tags are superior to ID3v1 tags, and needs less seeking around to find.
|
2007-09-19 10:40:55 +00:00 |
|
imx31l.h
|
Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks.
|
2007-09-21 15:51:53 +00:00 |
|
isp1362.h
|
|
|
|
kernel.h
|
Commit a subset of the dual core changes that have to do with cache handling, stacks, firmware startup and thread startup. Tested on e200, H10-20GB, iPod Color and 5.5G. Thread function return implemented for all targets. Some changes to plugins to follow shortly.
|
2007-09-28 10:20:02 +00:00 |
|
lcd-charcell.h
|
|
|
|
lcd-remote.h
|
Enable a lot more features for simulators and add stubs where necessary, simulators should now work with identical lng and voice files as the respective target
|
2007-08-12 19:49:03 +00:00 |
|
lcd.h
|
Fix the LCD line remaining active after shutdown on grayscale ipods (FS#5199). Original patch by Tomasz Mon, modified by me.
|
2007-09-29 20:56:07 +00:00 |
|
led.h
|
|
|
|
linkedlist.h
|
fix red and yellow - i hope and double content in some files.. dont ask how this could happen
|
2007-08-27 16:26:56 +00:00 |
|
logf.h
|
|
|
|
lv24020lp.h
|
e200: Tuner driver needs to yield alot and also be mutexed. FM debug screen got broken again and was ignoring cancellation and not drawing the lines.
|
2007-07-14 22:00:50 +00:00 |
|
m5636.h
|
|
|
|
mas.h
|
|
|
|
mas35xx.h
|
|
|
|
mcf5249.h
|
|
|
|
mcf5250.h
|
|
|
|
mp3_playback.h
|
|
|
|
mp3data.h
|
|
|
|
mpeg.h
|
Remove the ID3 tag version priority setting on the grounds of it being pretty pointless. ID3v2 tags are superior to ID3v1 tags, and needs less seeking around to find.
|
2007-09-19 10:40:55 +00:00 |
|
panic.h
|
|
|
|
pcf50605.h
|
Try to fix the case where Ipods would spuriously wake up even though no alarm had been set.
|
2007-09-28 15:09:54 +00:00 |
|
pcf50606.h
|
|
|
|
pcm_playback.h
|
|
|
|
pcm_record.h
|
|
|
|
pcm_sampr.h
|
|
|
|
pnx0101.h
|
PNX0101: new register names and polishing support for Clock Generation Unit
|
2007-09-20 22:13:48 +00:00 |
|
power.h
|
Moved archos power handling into target tree. * Tuner power handling cleaned up a bit.
|
2007-08-14 22:06:23 +00:00 |
|
powermgmt.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
pp5002.h
|
Compile Portal Player bootloaders as single core. Cleanup the startup code for bootloaders. Remove cop stack entirely and keep IRAM use down on all relevant targets - just use the 128-byte idle stack. Use the inline asm version of current_core for pp5002 as well.
|
2007-09-29 06:17:33 +00:00 |
|
pp5020.h
|
Add some defines for pp502x. No guarantee as to full accuracy yet but that's not really too important. Use them in the code.
|
2007-09-30 10:53:31 +00:00 |
|
pp5024.h
|
|
|
|
profile.h
|
|
|
|
replaygain.h
|
Small ReplayGain cleanup. Move RVA2 specific code to id3.c and don't do the parsing via strings. Generalize parts of the code for later use by MPC. Make some local functions static. Add and update some comments for clarity.
|
2007-08-25 10:25:13 +00:00 |
|
rolo.h
|
|
|
|
rtc.h
|
|
|
|
s1a0903x01.h
|
Fix all the red this time?
|
2007-07-14 13:41:59 +00:00 |
|
s3c2440.h
|
Get rid of yellow plus an optimization I should have seen in the first place.
|
2007-07-05 08:21:10 +00:00 |
|
scroll_engine.h
|
FS#7808 by Tom Ross, Ken Fazzone and me, with help from Antoine Cellerier.
|
2007-09-27 15:42:55 +00:00 |
|
serial.h
|
|
|
|
sh7034.h
|
|
|
|
sound.h
|
|
|
|
spdif.h
|
|
|
|
spi.h
|
start of the tsc2100 driver.
|
2007-09-22 14:21:07 +00:00 |
|
structec.h
|
|
|
|
sw_i2c.h
|
|
|
|
system.h
|
|
|
|
tea5767.h
|
Do some planned radio interface cleanup since adding in the LV24020LP.
|
2007-07-14 11:20:31 +00:00 |
|
thread.h
|
Commit a subset of the dual core changes that have to do with cache handling, stacks, firmware startup and thread startup. Tested on e200, H10-20GB, iPod Color and 5.5G. Thread function return implemented for all targets. Some changes to plugins to follow shortly.
|
2007-09-28 10:20:02 +00:00 |
|
timer.h
|
Beginning of an M:Robe 500i port. Currently only in the bootloader stage. Needs another piece of code to start the boot process - will be in the wiki.
|
2007-09-20 04:46:41 +00:00 |
|
tlv320.h
|
|
|
|
tsc2100.h
|
start of the tsc2100 driver.
|
2007-09-22 14:21:07 +00:00 |
|
tuner.h
|
Moved archos power handling into target tree. * Tuner power handling cleaned up a bit.
|
2007-08-14 22:06:23 +00:00 |
|
uda1380.h
|
|
|
|
usb.h
|
Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks.
|
2007-09-21 15:51:53 +00:00 |
|
usb_ch9.h
|
fix red and yellow - i hope and double content in some files.. dont ask how this could happen
|
2007-08-27 16:26:56 +00:00 |
|
usb_serial.h
|
|
|
|
usbstack.h
|
first part of usbstack patches -> show and use selection of usb stack mode only, if
|
2007-09-30 12:25:06 +00:00 |
|
wm8731l.h
|
|
|
|
wm8751.h
|
Fix my mistakes in some bits in the WM8751 header. Looks like adaptive boost has been turned on by mistake anyway. Correct that and make sure it is turned on intentionally with the #define. Organize a little bit in there.
|
2007-07-17 00:23:56 +00:00 |
|
wm8758.h
|
|
|
|
wm8975.h
|
|
|
|
wmcodec.h
|
|
|
0f5d9f9125