| .. |
|
sansa-clip
|
Sansa AMS: ignore buttons when hold switch is on
|
2008-12-03 11:30:18 +00:00 |
|
sansa-e200v2
|
Sansa AMS: Use a valid PLL setting (248MHz aka maximum fclk)
|
2008-11-30 16:36:32 +00:00 |
|
sansa-fuze
|
Sansa AMS: Use a valid PLL setting (248MHz aka maximum fclk)
|
2008-11-30 16:36:32 +00:00 |
|
sansa-m200v4
|
fix hold-button handling for m200v4.
|
2008-12-03 18:41:02 +00:00 |
|
adc-target.h
|
Sansa AMS: use the AS3514 ADC driver
|
2008-11-10 20:55:56 +00:00 |
|
app.lds
|
Sansa AMS: do not load stack and bss inside the rockbox binary (FS#9593)
|
2008-12-01 03:54:27 +00:00 |
|
as3525-codec.c
|
Initialise mutex before using it in as3525-codec.c, also use mutex for single codec register accesses.
|
2008-11-23 12:24:47 +00:00 |
|
ascodec-target.h
|
Sansa AMS: declare ascodec_init() function in the header
|
2008-11-10 20:59:10 +00:00 |
|
ata_sd_as3525.c
|
Sansa AMS: sd_enable() isn't available in the bootloader
|
2008-12-01 08:18:22 +00:00 |
|
audio-as3525.c
|
Sansa AMS: remove symbol already defined in audio/as3514.c driver
|
2008-11-10 21:04:32 +00:00 |
|
backlight-e200v2-fuze.c
|
Fix reds. Also note my r19221 commit message had a typo - shoudld have been e200/c200, not e100.
|
2008-11-26 10:21:03 +00:00 |
|
boot.lds
|
Common data must be included in .bss or it won't get zeroed in crt0. Fix the archos self-extractor as well to play safe.
|
2008-11-07 00:15:53 +00:00 |
|
debug-as3525.c
|
Fix Clip firmware building by adding missing symbols
|
2008-11-10 11:04:43 +00:00 |
|
debug-target.h
|
Fix Clip firmware building by adding missing symbols
|
2008-11-10 11:04:43 +00:00 |
|
dma-pl081.c
|
Sansa AMS: use non-busy wakeup to signal end of DMA transfer
|
2008-11-26 16:02:00 +00:00 |
|
dma-target.h
|
Sansa AMS: use non-busy wakeup to signal end of DMA transfer
|
2008-11-26 16:02:00 +00:00 |
|
i2c-as3525.c
|
Fix Clip firmware building by adding missing symbols
|
2008-11-10 11:04:43 +00:00 |
|
i2s-as3525.c
|
Fix Clip firmware building by adding missing symbols
|
2008-11-10 11:04:43 +00:00 |
|
kernel-as3525.c
|
Sansa AMS: kernel functions need the timer definitions
|
2008-11-26 14:42:40 +00:00 |
|
pcm-as3525.c
|
Add more driver stubs to make the Fuze and e200v2 main builds compile; Correct the memory definition for the Fuze (8MB)
|
2008-11-11 14:46:13 +00:00 |
|
power-as3525.c
|
Added power.h include to power-as3525.c
|
2008-11-22 20:55:46 +00:00 |
|
powermgmt-as3525.c
|
Implement a basic uncalibrated battery reading for all as3525 targets with a lithium battery.
|
2008-11-23 15:00:44 +00:00 |
|
system-as3525.c
|
Sansa AMS: Use a valid PLL setting (248MHz aka maximum fclk)
|
2008-11-30 16:36:32 +00:00 |
|
system-target.h
|
Sansa AMS: Use a valid PLL setting (248MHz aka maximum fclk)
|
2008-11-30 16:36:32 +00:00 |
|
timer-target.h
|
Sansa AMS: correct timer definition (clk_main == 24MHz / 16)
|
2008-11-26 14:40:57 +00:00 |
|
usb-as3525.c
|
Revert r19069 - the m200s can't charge. Also, don't use charger_inserted() as a method for detecting USB (this gives a false positive with USB wall chargers), and protect the definition of charger_inserted() with #if CONFIG_CHARGING.
|
2008-11-10 18:15:52 +00:00 |
0d0cc039f8