7e0492444c
USB ask mode is basically a footgun: it can't work on native targets
and doesn't work reliably on hosted ones, and it continually produces
a slow trickle of problems. FS#13317 gives a rundown of the issues.
Removing the setting seems like the best solution for now, since a fix
would be pretty involved.
This partially reverts 60f581e8f5. The USB Mode setting is left in
place so the option can be added back later in a non-buggy way.
Change-Id: Ie01b28dd2ed95a31b509a7834d85bac8eb866098
862 lines
42 KiB
TeX
862 lines
42 KiB
TeX
% $Id$ %
|
|
\chapter{\label{ref:rockbox_interface}Quick Start}
|
|
\section{Basic Overview}
|
|
\subsection{The \daps{} controls}
|
|
|
|
% include the front image. Using \specimg makes this fairly easy,
|
|
% but requires to use the exact value of \specimg in the filename!
|
|
% The extension is selected in the preamble, so no further \Ifpdfoutput
|
|
% is necessary.
|
|
%
|
|
% The check looks for a png file -- we use png for the HTML manual, so that
|
|
% format needs to be present. It can also be used for the pdf manual, but
|
|
% usually we provide a pdf version of the file for that. Picking the correct
|
|
% one is done by LaTeX automatically, but for checking the filename we need to
|
|
% specify the extension.
|
|
\begin{center}
|
|
\IfFileExists{rockbox_interface/images/\specimg-front.png}
|
|
{\Ifpdfoutput{\includegraphics[height=8cm,width=10cm,keepaspectratio=true]%
|
|
{rockbox_interface/images/\specimg-front}}
|
|
{\includegraphics{rockbox_interface/images/\specimg-front}}
|
|
}
|
|
{\color{red}{\textbf{WARNING!} Image not found}%
|
|
\typeout{Warning: missing front image}
|
|
}
|
|
\end{center}
|
|
\opt{HAVEREMOTEKEYMAP}{
|
|
% spacing between the two pictures, could possibly be improved
|
|
\begin{center}
|
|
\IfFileExists{rockbox_interface/images/\specimg-remote.png}
|
|
{\Ifpdfoutput{\includegraphics[height=5.6cm,width=10cm,keepaspectratio=true]{rockbox_interface/images/\specimg-remote}}
|
|
{\includegraphics{rockbox_interface/images/\specimg-remote}}
|
|
}
|
|
{\color{red}{\textbf{WARNING!} Image not found}%
|
|
\typeout{Warning: missing remote image}
|
|
}
|
|
\end{center}
|
|
}
|
|
|
|
Throughout this manual, the buttons on the \dap{} are labelled according to the
|
|
picture above.
|
|
\opt{touchscreen}{
|
|
The areas of the touchscreen in the 3$\times$3 grid mode are in turn referred as follows:
|
|
\begin{table}
|
|
\centering
|
|
\begin{tabular}{|c|c|c|}
|
|
\hline
|
|
\TouchTopLeft & \TouchTopMiddle & \TouchTopRight \\ [5ex]
|
|
\hline
|
|
\TouchMidLeft & \TouchCenter & \TouchMidRight \\ [5ex]
|
|
\hline
|
|
\TouchBottomLeft & \TouchBottomMiddle & \TouchBottomRight \\ [5ex]
|
|
\hline
|
|
\end{tabular}
|
|
\end{table}
|
|
}%
|
|
Whenever a button name is prefixed by ``Long'', a long press of approximately
|
|
one second should be performed on that button. The buttons are described in
|
|
detail in the following paragraph.
|
|
\blind{%
|
|
Additional information for blind users is available on the Rockbox website at
|
|
\wikilink{BlindFAQ}.
|
|
|
|
%
|
|
\opt{iriverh100}{
|
|
Hold or lay the \dap{} so that the side with the joystick and LCD is facing
|
|
towards you, and the curved side is at the top. The joystick functions as
|
|
the \ButtonUp{}, \ButtonRight{}, \ButtonLeft{}, and \ButtonDown{} buttons when
|
|
pressed in the appropriate direction. Pressing the joystick down functions as
|
|
\ButtonSelect{}.
|
|
On the right side of the \dap{} are the \ButtonOn{}, \ButtonOff{},
|
|
\ButtonMode{} buttons, and the \ButtonHold{} switch. When this switch is
|
|
switched towards the bottom of the \dap{}, hold is on, and none of the other
|
|
buttons have any effect.
|
|
|
|
On the left side is the \ButtonRec{} button. Above that is the internal microphone.
|
|
|
|
On the top panel of the \dap{}, from left to right, you can find the
|
|
following: headphone mini jack plug, remote port, Optical line-in, Optical line-out.
|
|
|
|
On the bottom panel of the \dap{}, from left to right, you can find the
|
|
following: power jack, reset switch, and USB port. In the event that your
|
|
\dap{} hard locks, you can reset it by inserting a paper clip into the hole
|
|
where the reset switch is.}
|
|
%
|
|
\opt{iriverh300}{
|
|
Hold or lay the \dap{} so that the side with the button pad and
|
|
LCD is facing towards you. The buttons on the button pad are as follows: top
|
|
left corner: \ButtonOn{}, bottom left corner: \ButtonOff{}, top right corner:
|
|
\ButtonRec, bottom right corner: \ButtonMode{}. In the center of the button pad
|
|
is a button labelled \ButtonSelect{}. Surrounding the \ButtonSelect{} button are
|
|
the \ButtonUp{}, \ButtonDown{}, \ButtonLeft{}, and \ButtonRight{} buttons.
|
|
|
|
On the top panel of the \dap{}, from left to right, you can find the
|
|
following: headphone mini jack plug, remote port, line-in, line-out.
|
|
|
|
On the left hand side of the \dap{} is the internal microphone. Just underneath
|
|
this is a small hole, the reset switch. In the event that your \dap{} hard locks,
|
|
you can reset it by inserting a paper clip into the hole where the reset switch
|
|
is.
|
|
|
|
On the right hand side of the \dap{} is the \ButtonHold{} switch. When this is
|
|
switched towards the bottom of the \dap{}, hold is on, and none of the other
|
|
buttons have any effect.
|
|
|
|
On the bottom panel of the \dap{}, from left to right, you can find the
|
|
following: power jack and two USB ports. The USB port on the right is used
|
|
to connect your \dap{} to your computer. The USB port on the left is not
|
|
used in Rockbox.
|
|
}
|
|
%
|
|
\opt{mpiohd200}{
|
|
Hold or lay the \dap{} so that the side with the LCD is facing towards you.
|
|
On the right hand side there is a rocker switch at the top which serves as
|
|
\ButtonRew{} and \ButtonFF{} when rocked up or down, respectively.
|
|
Pressing the rocker in functions as the \ButtonFunc{} button. Below the rocker
|
|
there are the \ButtonRec{} and \ButtonPlay{} buttons. At the bottom of the
|
|
right panel there is the \ButtonHold{} switch. When this is switched towards the
|
|
bottom of the \dap{}. hold is on, and none of the other buttons have any effect.
|
|
|
|
On the top panel of the \dap{} there is another rocker which serves as the
|
|
\ButtonVolDown{} and \ButtonVolUp{} buttons when pressed to the left or right,
|
|
respectively.
|
|
|
|
On the left hand side of the \dap{} there is a headphone mini jack plug at the top
|
|
and a small hole at the bottom, the reset switch. In the event that your \dap{}
|
|
hard locks, you can reset it by inserting a paper clip into the hole where the
|
|
reset switch is.
|
|
|
|
On the bottom panel of the \dap{}, from left to right, you can find the
|
|
following: power jack, line-in jack and USB port (under rubber cover).
|
|
}
|
|
%
|
|
\opt{ipod4g,ipodcolor,ipodvideo,ipodmini}{
|
|
The main controls on the \dap{} are a slightly indented scroll wheel
|
|
with a flat round button in the center. Hold the \dap{} with these controls
|
|
facing you.
|
|
|
|
The top of the player will have the following, from left to
|
|
right:
|
|
\opt{ipod4g,ipodcolor}{remote connector, headphone socket, \ButtonHold{}
|
|
switch.}
|
|
\opt{ipodvideo}{\ButtonHold{} switch, headphone socket.}
|
|
\opt{ipodmini}{\ButtonHold{} switch, remote connector, headphone socket.}
|
|
|
|
The dock connector that is used to connect your \dap{} to your computer is on
|
|
the bottom panel of the \dap{}.
|
|
|
|
The button in the middle of the wheel is called \ButtonSelect{}. You can
|
|
operate the wheel by pressing the top, bottom, left or right sections,
|
|
or by sliding your finger around it. The top is \ButtonMenu{}, the bottom is
|
|
\ButtonPlay{}, the left is \ButtonLeft{}, and the right is \ButtonRight{}.
|
|
When the manual says to \ButtonScrollFwd{}, it means to slide your finger
|
|
clockwise around the wheel. \ButtonScrollBack{} means to slide your finger
|
|
counterclockwise. Note that the wheel is sensitive, so you will need to move
|
|
slowly at first and get a feel for how it works.
|
|
|
|
Note that when the \ButtonHold{} switch is pushed toward the center of the \dap{},
|
|
hold is on, and none of the other controls do anything. Be sure
|
|
\ButtonHold{} is off before trying to use your player.
|
|
}
|
|
%
|
|
\opt{ipod3g}{
|
|
The main controls on the \dap{} are a slightly indented touch wheel
|
|
with a flat round button in the center, and four buttons in a row above the
|
|
touch wheel. Hold the \dap{} with these controls
|
|
facing you.
|
|
|
|
The top of the player will have the following, from left to
|
|
right: remote connector, headphone socket, \ButtonHold{} switch.
|
|
|
|
The dock connector that is used to connect your \dap{} to your computer is on
|
|
the bottom panel of the \dap{}.
|
|
|
|
The button in the middle of the wheel is called \ButtonSelect{}. You can
|
|
operate the wheel by sliding your finger around it. The row of
|
|
buttons consists of, from left to right, the \ButtonLeft{},
|
|
\ButtonMenu{}, \ButtonPlay{}, and \ButtonRight{} buttons.
|
|
When the manual says to \ButtonScrollFwd{}, it means to slide your finger
|
|
clockwise around the wheel. \ButtonScrollBack{} means to slide your finger
|
|
counterclockwise. Note that the wheel is sensitive, so you will need to move
|
|
slowly at first and get a feel for how it works.
|
|
|
|
Note that when the \ButtonHold{} switch is pushed toward the center of the \dap{},
|
|
hold is on, and none of the other controls do anything. Be sure
|
|
\ButtonHold{} is off before trying to use your player.
|
|
}
|
|
%
|
|
\opt{ipod1g2g}{
|
|
The main controls on the \dap{} are a slightly indented wheel
|
|
with a flat round button in the center, and four buttons surrounding
|
|
it. On the 1st generation iPod, this wheel physically turns. On the
|
|
2nd generation iPod, this wheel is touch-sensitive. Hold the \dap{} with these controls
|
|
facing you.
|
|
|
|
The top of the player will have the following, from left to
|
|
right: FireWire port, headphone socket, \ButtonHold{} switch.
|
|
|
|
The FireWire port is used to connect your \dap{} to the computer and
|
|
to charge its battery via a wall charger.
|
|
|
|
The button in the middle of the wheel is called \ButtonSelect{}. You can
|
|
operate the wheel by turning it, or sliding your finger around
|
|
it. The top is \ButtonMenu{}, the bottom is \ButtonPlay{}, the left
|
|
is \ButtonLeft{}, and the right is \ButtonRight{}.
|
|
When the manual says to \ButtonScrollFwd{}, it means to slide your finger
|
|
clockwise around the wheel. \ButtonScrollBack{} means to slide your finger
|
|
counterclockwise. Note that the wheel is sensitive, so you will need to move
|
|
slowly at first and get a feel for how it works.
|
|
|
|
Note that when the \ButtonHold{} switch is pushed toward the center of the \dap{},
|
|
hold is on, and none of the other controls do anything. Be sure
|
|
\ButtonHold{} is off before trying to use your player.
|
|
}
|
|
%
|
|
\opt{ipodnano,ipodnano2g}{
|
|
The main controls on the \dap{} are a slightly indented wheel with a
|
|
flat round button in the center. Hold the \dap{} with these controls on the
|
|
top surface. There is a \ButtonHold{} switch at one end, and
|
|
headphone and dock connector at the other; be sure the end with the
|
|
switch is facing away from you.
|
|
|
|
The button in the middle of the wheel is called \ButtonSelect{}. You can
|
|
operate the wheel by pressing the top, bottom, left or right sections,
|
|
or by sliding your finger around it. The top is \ButtonMenu{}, the bottom is
|
|
\ButtonPlay{}, the left is \ButtonLeft{}, and the right is \ButtonRight{}.
|
|
When the manual says to \ButtonScrollFwd{}, it means to slide your finger
|
|
clockwise around the wheel. \ButtonScrollBack{} means to slide your finger
|
|
counterclockwise. Note that the wheel is sensitive, so you will need to move
|
|
slowly at first and get a feel for how it works.
|
|
|
|
Note that when the \ButtonHold{} switch is pushed toward the center of the \dap{},
|
|
hold is on, and none of the other controls do anything; be sure \ButtonHold{} is
|
|
off before trying to use your player.
|
|
}
|
|
%
|
|
\opt{iriverh10,iriverh10_5gb}{
|
|
Hold or lay the \dap{} so that the side with the scroll pad and
|
|
LCD is facing towards you. In the centre below the lcd is the scroll pad. It
|
|
is oriented vertically. Touching the top and bottom half of it acts as the
|
|
\ButtonScrollUp{} and \ButtonScrollDown{} buttons respectively. On the left
|
|
of the scroll pad is the \ButtonLeft{} button and on the right is the
|
|
\ButtonRight{} button.
|
|
|
|
There are three buttons on the right hand side of the \dap{}. From top to
|
|
bottom, they are: \ButtonRew{}, \ButtonPlay{} and \ButtonFF{}. On the left
|
|
hand side is the \ButtonPower{} button.
|
|
|
|
On the top panel of the \dap{}, from left to right, you can find the
|
|
following: \ButtonHold{} switch, \opt{iriverh10}{reset pin hole, }remote port
|
|
and headphone mini jack plug.
|
|
|
|
On the bottom panel of the \dap{} is the data cable port.}
|
|
%
|
|
\opt{gigabeatf}{
|
|
\note{The following description is for the Gigabeat F, but can also apply for the
|
|
Gigabeat X. The Gigabeat F is slightly larger and more rectangular shaped, while the
|
|
Gigabeat X is smaller and has a slightly tapered back.}
|
|
|
|
Hold the \dap{} with the screen on top and the controls on the right hand side.
|
|
Below the screen is a cross-shaped touch sensitive pad which contains the
|
|
\ButtonUp{}, \ButtonDown{}, \ButtonLeft{} and \ButtonRight{} controls. On the
|
|
Gigabeat X, this pad will feel slightly raised up, while it will feel slightly
|
|
sunken in on the Gigabeat F. On the top of the unit, from left to right, are the
|
|
power socket, the \ButtonHold{} switch, and the headphone socket. The
|
|
\ButtonHold{} switch puts the \dap{} into hold mode when it is switched to the
|
|
right of the unit. The buttons will have no effect when this is the case.
|
|
|
|
Starting from the left hand side on the bottom of the unit, nearer to the front
|
|
than the back, is a recessed switch which
|
|
controls whether the battery is on or off. When this switch is to the left,
|
|
the battery is disconnected. This can be used for a hard reset of the unit,
|
|
or if the \dap{} is being placed in storage. Next to that is a connector for
|
|
the docking station and finally on the right hand side of the bottom of the
|
|
unit is a mini USB socket for connecting directly to USB.
|
|
|
|
Finally on the right hand side of the unit are some control buttons. Going from
|
|
the bottom of the unit to the top there is a small round \ButtonA{} buttton then a
|
|
rocker volume switch with of the \ButtonVolDown{} button below the \ButtonVolUp{}
|
|
button. Above that is are two more small round buttons, the \ButtonMenu{}
|
|
button and nearest to the top of the unit the \ButtonPower{} button, which is held
|
|
down to turn the \dap{} on or off. If you have a Gigabeat X, these buttons are small
|
|
metallic buttons that are place further up on the right hand side, and closer
|
|
together. The layout is still the same, however.}
|
|
%
|
|
\opt{gigabeats}{
|
|
Hold the \dap{} with the screen on top and the controls on the right hand side.
|
|
Directly below the bottom edge of the screen are two buttons, \ButtonBack{}
|
|
on the left and \ButtonMenu{} on the right. Below them is a cross-shaped pad
|
|
which contains the \ButtonUp{}, \ButtonDown{}, \ButtonLeft{}, \ButtonRight{}
|
|
and \ButtonSelect{} controls.
|
|
On the top of the unit from left to right are the headphone socket and the
|
|
\ButtonHold{} switch. The \ButtonHold{} switch puts the \dap{} into
|
|
hold mode when it is switched to the right of the unit.
|
|
The buttons will have no effect when this is the case.
|
|
|
|
Starting from the left hand side on the bottom of the unit, nearer to the back
|
|
than the front, is a recessed switch which controls whether the battery is on
|
|
or off. When this switch is to the left, the battery is disconnected.
|
|
This can be used for a hard reset of the unit, or if the \dap{} is being placed
|
|
in storage. Next to that is a mini USB socket for connecting directly to USB,
|
|
and finally a custom connector, presumably for planned accessories which were
|
|
never released.
|
|
|
|
Finally on the right hand side of the unit are some control buttons and the power
|
|
connector. Going from the bottom of the unit to the top, there is the power
|
|
connector socket, followed by three small round buttons, the
|
|
\ButtonNext{} buttton, \ButtonPlay{} button, and \ButtonPrev{} button (from bottom
|
|
to top) then a rocker volume switch with of the \ButtonVolDown{} button below the
|
|
\ButtonVolUp{} button. Above that is one more small round button, the \ButtonPower{}
|
|
button, which is held down to turn the \dap{} on or off.}
|
|
%
|
|
\opt{mrobe100}{
|
|
Hold the \dap{} with the black front facing you such that the m:robe writing
|
|
is readable. Below the writing is the touch sensitive pad with the
|
|
\ButtonMenu{}, \ButtonPlay{}, \ButtonLeft{}, \ButtonRight{} and \ButtonDisplay
|
|
controls indicated by their symbols. The dotted center strip is devided in
|
|
three parts: \ButtonUp{}, \ButtonSelect{} and \ButtonDown. On the top of the
|
|
unit, on the right, is the \ButtonPower{} switch, which is held down to turn
|
|
the \dap{} on or off.
|
|
|
|
The \ButtonHold{} switch is located on the left of the \dap{}, below the
|
|
headphone socket. It puts the \dap{} into hold mode when it is switched to the
|
|
top of the unit. The buttons will have no effect when this is the case. On the
|
|
bottom of the unit, there is a connector for the docking station or the
|
|
proprietary USB connector for connecting directly to USB.}
|
|
%
|
|
\opt{iaudiom5,iaudiox5}{
|
|
The \dap{} is curved so that the end with the screen on it is thicker than the
|
|
other end. Hold the \dap{} wih the thick end towards the top and the screen
|
|
facing towards you. Half way up the front of the unit on the right hand side
|
|
is a four way joystick which is the \ButtonUp{}, \ButtonDown{},
|
|
\ButtonLeft{}, and \ButtonRight{} buttons. When pressed it serves as \ButtonSelect{}.
|
|
|
|
On the right hand side of the \dap{} from top to bottom, first there is a two
|
|
way switch. the \ButtonPower{} button is activated by pushing this switch up,
|
|
and pushing this switch down until it clicks slightly will activate the
|
|
\ButtonHold{} button. When the switch is in this position, none of the other
|
|
keys will have an effect.
|
|
|
|
Below the switch is a lozenge shaped button which is the \ButtonRec{}
|
|
button, and below that the final button on this side of the unit, the
|
|
\ButtonPlay{} button. Just below this is a small hole which is difficult to
|
|
locate by touch which is the internal microphone. At the very bottom of
|
|
this side of the unit is the reset hole, which can be used to perform a hard
|
|
reset by inserting a paper clip.
|
|
|
|
On the bottom of the unit is the connector for the
|
|
\playerman{} subpack or dock. On the top of the unit is a charge
|
|
indicator light, which may feel a bit like a button, but is not.
|
|
|
|
From the top of the \dap{} on the left hand side is the headphone socket, then the
|
|
remote connector. Below this is a cover which protects the \opt{iaudiox5}{USB
|
|
host connector.}\opt{iaudiom5}{USB and charging connector}.}
|
|
%
|
|
\opt{e200,e200v2}{
|
|
Hold the \dap{} with the turning wheel at the front and bottom. On the bottom left
|
|
of the front of the \dap{} is a raised round button, the \ButtonPower{} button.
|
|
Above and to the left of this, on the outside of the turning wheel are four
|
|
buttons. These are the \ButtonUp{}, \ButtonDown{}, \ButtonLeft{} and
|
|
\ButtonRight{} buttons. Inside the wheel is the \ButtonSelect{} button. Turning
|
|
the wheel to the right activates the \ButtonScrollFwd{} function, and to the
|
|
left, the \ButtonScrollBack{} function.
|
|
|
|
On the right of the unit is a slot for inserting flash cards. On the bottom is
|
|
the connector for the USB cable. On the left is the \ButtonRec{} button, and
|
|
on the top, there is the headphone socket to the right, and the \ButtonHold{}
|
|
switch. Moving this switch to the right activates hold mode in which none of the
|
|
other buttons have any effect. Just to the left of the \ButtonHold{} switch is a
|
|
small hole which contains the internal microphone.}
|
|
%
|
|
\opt{c200,c200v2}{
|
|
Hold the \dap{} with the buttons on the right and the screen on the left. On
|
|
the right side of the unit, there is a series of four connected buttons that
|
|
form a square. The four sides of the square are the \ButtonUp{},
|
|
\ButtonDown{}, \ButtonLeft{} and \ButtonRight{} buttons, respectively. Inside
|
|
the square formed by these four buttons is the \ButtonSelect{} button. At the
|
|
bottom right corner of the square is a small separate button, the
|
|
\ButtonPower{} button.
|
|
|
|
Moving clockwise around the outside of the unit, on the top are the \ButtonVolUp{}
|
|
and \ButtonVolDown{} buttons, which control the volume of playback. The buttons can
|
|
be distinguished by a sunken triangle on the \ButtonVolDown{} button, and a
|
|
raised triangle on the \ButtonVolUp{} button. To the right of
|
|
the volume buttons on the top of the unit is the slot for inserting flash
|
|
memory cards. On the right side of the unit is the connector for the USB
|
|
cable. At center of the bottom of the \dap{} is the \ButtonRec{} button. To
|
|
the left of the \ButtonRec{} button is the \ButtonHold{} switch. Moving this
|
|
switch to the right activates hold mode, in which none of the other buttons
|
|
have any effect. On the lower left side of the unit is the headphone socket.
|
|
Immediately above the headphone socket is a lanyard loop and the microphone.
|
|
}
|
|
%
|
|
\opt{fuze,fuzev2}{
|
|
Hold the \dap{} with the controls on the bottom and the screen on the top. The main
|
|
controls are a scroll wheel with four clickable points and a button in the centre; pressing
|
|
this centre button functions as \ButtonSelect{}. Going clockwise from the top, the clickable
|
|
points on the wheel are the \ButtonUp{}, \ButtonRight{}, \ButtonDown{}, and \ButtonLeft{}
|
|
buttons. Turning the wheel clockwise is \ButtonScrollFwd{}, and turning it counter-clockwise
|
|
is \ButtonScrollBack{}. Immediately above and to the right of the wheel is the \ButtonHome{}
|
|
button.
|
|
|
|
On the lower left of the unit is a slot for inserting microSD cards. Immediately below that is
|
|
the opening for the microphone.
|
|
|
|
On the bottom of the unit is the connector for connecting a USB cable and the headphone socket.
|
|
On the lower right hand side of the unit is a two-way switch. Pressing this switch up acts as
|
|
\ButtonPower{}, and clicking it down until it locks acts as the \ButtonHold{} switch. When the
|
|
\ButtonHold{} switch is on, none of the other buttons have any effect.
|
|
}
|
|
%
|
|
\opt{clipplus,clipv1,clipv2,clipzip}{
|
|
Hold the \dap{} with the controls on the bottom and the screen on the top. The main
|
|
controls are a four-way pad with a button in the centre; pressing this centre button
|
|
functions as \ButtonSelect{}. Going clockwise from the top, the four-way pad contains
|
|
the \ButtonUp{}, \ButtonRight{}, \ButtonDown{}, and \ButtonLeft{} buttons.
|
|
Immediately above and to the \nopt{clipzip}{right}\opt{clipzip}{left} of the four-way
|
|
pad is the \ButtonHome{} button.
|
|
}
|
|
%
|
|
\opt{clipplus,clipzip}{
|
|
The \ButtonPower{} button is on the top of the \dap{}\opt{clipplus}{, towards the right side.}
|
|
|
|
At the bottom of the right side of the \dap{} is a slot for microSD cards.
|
|
Above this slot on the right side is the headphone socket.
|
|
|
|
On the left hand panel is a two-way button that acts as \ButtonVolDown{} when
|
|
pressed on the bottom, and \ButtonVolUp{} when pressed on the top. Immediately
|
|
above the switch is a mini-USB port to connect the \dap{} to a computer.
|
|
|
|
}
|
|
%
|
|
\opt{clipv1,clipv2}{
|
|
On the left hand panel is a two way switch. Pressing this switch up acts as
|
|
\ButtonPower{}, and clicking it down until it locks acts as the \ButtonHold{}
|
|
switch. When the \ButtonHold{} switch is on, none of the other buttons have any
|
|
effect. Immediately above the switch is a mini-USB port to connect the \dap{} to
|
|
a computer.
|
|
|
|
On the right hand panel is a two-way button that acts as \ButtonVolDown{} when
|
|
pressed on the bottom, and \ButtonVolUp{} when pressed on the top. Immediately
|
|
above this button is the headphone socket.
|
|
}
|
|
%
|
|
\opt{vibe500}{
|
|
Hold or lay the \dap{} so that the side with the controls and
|
|
LCD is facing towards you. Below the LCD is the touch sensitive pad with the \ButtonMenu{},
|
|
\ButtonPlay{}, \ButtonLeft{}, \ButtonRight{} controls and the scroll pad in the centre. The
|
|
scroll pad is oriented vertically between the \ButtonOK{} and \ButtonCancel{} buttons.
|
|
Sliding a finger up or down the scroll pad acts as \ButtonUp{} and \ButtonDown{} respectively.
|
|
Note that the scroll pad is sensitive, so you will need to move
|
|
slowly at first and get a feel for how it works.
|
|
|
|
There are two buttons on the right hand side of the \dap{}: \ButtonPower{} on the top and
|
|
\ButtonRec{} underneath. Under these buttons, from top to bottom you can find: USB connector,
|
|
power connector and the reset hole if you need to perform a hardware reset.
|
|
|
|
The \ButtonHold{} switch is located on the left hand side of the \dap{}. Note that when the
|
|
\ButtonHold{} switch is moved towards the top of the \dap{}, hold is turned on and all the
|
|
other controls are disabled. Be sure \ButtonHold{} is off before trying to use your player.
|
|
|
|
On the top on the \dap{} is the internal microphone on the left and the line-in socket on the
|
|
right, near the headphone socket.}
|
|
%
|
|
\opt{samsungyh820}{
|
|
Hold or lay the \dap{} so that the side with the controls and
|
|
LCD is facing towards you. Directly below the bottom edge of the screen are three buttons:
|
|
\ButtonRew{} on the left, \ButtonPlay{} in the middle and \ButtonFF{} on the right. Below them
|
|
is a four-way pad which contains the \ButtonDown{}, \ButtonUp{}, \ButtonLeft{} and
|
|
\ButtonRight{} controls.
|
|
|
|
At the top of the right hand side of the \dap{} is the \ButtonRec{} button.
|
|
|
|
On the top panel of the \dap{}, from left to right, you can find the following: headphone
|
|
socket, line-in socket, internal microphone, and the \ButtonHold{} switch. Note that when the
|
|
\ButtonHold{} switch is moved towards the center of the \dap{}, hold is turned on and all the
|
|
other controls are disabled. Be sure \ButtonHold{} is off before trying to use your player.
|
|
|
|
At the top of the back side of the player, just under the \ButtonHold{} button is the reset
|
|
hole, if you need to perform a hardware reset.
|
|
|
|
The USB/dock connector that is used to connect your \dap{} to your computer is on
|
|
the bottom panel of the \dap{}.
|
|
}
|
|
%
|
|
\opt{samsungyh920,samsungyh925}{
|
|
Hold or lay the \dap{} so that the side with the controls and
|
|
LCD is facing towards you. Below the LCD is a four-way pad with the \ButtonDown{},
|
|
\ButtonUp{}, \ButtonLeft{} and \ButtonRight{} buttons.
|
|
|
|
There are three buttons at the top of the right hand side of the \dap{}: \ButtonFF{} on the top,
|
|
\ButtonPlay{} in the middle and \ButtonRew{} underneath. Below these buttons is the \ButtonRec{}
|
|
switch. Rockbox doesn't take note of the actual \emph{position} of the switch, but reacts to a
|
|
\emph{switching movement} like pressing a regular button.
|
|
|
|
On the top panel of the \dap{}, from left to right, you can find the following: headphone/remote
|
|
socket, line-in socket, internal microphone, and the \ButtonHold{} switch. Note that when the
|
|
\ButtonHold{} switch is moved towards the center of the \dap{}, hold is turned on and all the
|
|
other controls are disabled. Be sure \ButtonHold{} is off before trying to use your player.
|
|
|
|
At the top of the back side of the player, just under the \ButtonHold{} button is the reset hole,
|
|
if you need to perform a hardware reset.
|
|
|
|
The USB/dock connector that is used to connect your \dap{} to your computer is on
|
|
the bottom panel of the \dap{}.
|
|
}
|
|
%
|
|
}
|
|
|
|
\subsection{Turning the \dap{} on and off}
|
|
\opt{cowond2}{Rockbox has a dual-boot feature with the original firmware being
|
|
the default.\\}
|
|
To turn on and off your Rockbox enabled \dap{} use the following keys:
|
|
\begin{btnmap}
|
|
\opt{IRIVER_H100_PAD,IRIVER_H300_PAD}{\ButtonOn}%
|
|
\opt{MPIO_HD200_PAD,MPIO_HD300_PAD,SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}%
|
|
{Long \ButtonPlay}%
|
|
\opt{IPOD_4G_PAD}{\ButtonMenu{} / \ButtonSelect}%
|
|
\opt{IPOD_3G_PAD}{\ButtonMenu{} / \ButtonPlay}%
|
|
\opt{IAUDIO_X5_PAD,IRIVER_H10_PAD,SANSA_E200_PAD,SANSA_C200_PAD,ONDA_VX777_PAD%
|
|
,GIGABEAT_PAD,MROBE100_PAD,GIGABEAT_S_PAD,sansaAMS,PBELL_VIBE500_PAD%
|
|
,SANSA_FUZEPLUS_PAD,XDUOO_X3_PAD,AIGO_EROSQ_PAD%
|
|
}{\ButtonPower}%
|
|
\opt{COWON_D2_PAD} {\ButtonPower{}, then \ButtonHold}%
|
|
\opt{ONDA_VX777_PAD} {\ButtonPower{}}%
|
|
\opt{AGPTEK_ROCKER_PAD}{\ButtonPower{}}%
|
|
&
|
|
\opt{HAVEREMOTEKEYMAP}{
|
|
\opt{IRIVER_RC_H100_PAD}{\ButtonRCOn}%
|
|
\opt{IAUDIO_RC_PAD}{\ButtonRCPlay}
|
|
&}
|
|
|
|
Start Rockbox
|
|
\\
|
|
|
|
\opt{IRIVER_H100_PAD,IRIVER_H300_PAD}{Long \ButtonOff}%
|
|
\opt{MPIO_HD200_PAD,MPIO_HD300_PAD,SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}%
|
|
{Long \ButtonPlay}%
|
|
\opt{IPOD_4G_PAD,IPOD_3G_PAD}{Long \ButtonPlay}%
|
|
\opt{IAUDIO_X5_PAD,IRIVER_H10_PAD,SANSA_E200_PAD,SANSA_C200_PAD%
|
|
,GIGABEAT_PAD,MROBE100_PAD,GIGABEAT_S_PAD,sansaAMS,COWON_D2_PAD%
|
|
,PBELL_VIBE500_PAD,ONDA_VX777_PAD,SANSA_FUZEPLUS_PAD,XDUOO_X3_PAD,AIGO_EROSQ_PAD%
|
|
}{Long \ButtonPower}%
|
|
\opt{AGPTEK_ROCKER_PAD}{Long \ButtonPower{}}%
|
|
&
|
|
\opt{HAVEREMOTEKEYMAP}{
|
|
\opt{IRIVER_RC_H100_PAD}{Long \ButtonRCStop}%
|
|
\opt{IAUDIO_RC_PAD}{Long \ButtonRCPlay}
|
|
&}
|
|
|
|
Shutdown Rockbox
|
|
\\
|
|
\end{btnmap}
|
|
|
|
\label{ref:Safeshutdown}On shutdown, Rockbox automatically saves its settings.
|
|
|
|
\opt{IRIVER_H100_PAD,IRIVER_H300_PAD,IAUDIO_X5_PAD,SANSA_E200_PAD%
|
|
,SANSA_C200_PAD,IRIVER_H10_PAD,IPOD_4G_PAD,GIGABEAT_PAD}{%
|
|
If you have problems with your settings, such as accidentally having
|
|
set the colours to black on black, they can be reset at boot time. See
|
|
the Reset Settings in \reference{ref:manage_settings_menu} for details.
|
|
}%
|
|
|
|
\opt{GIGABEAT_PAD,IPOD_4G_PAD,SANSA_E200_PAD%
|
|
,SANSA_C200_PAD,IAUDIO_X5_PAD,IAUDIO_M5_PAD,IPOD_3G_PAD}{%
|
|
In the unlikely event of a software failure, hardware poweroff or reset can be
|
|
performed by holding down
|
|
\opt{GIGABEAT_PAD}{the battery switch}\opt{IPOD_4G_PAD}
|
|
{\ButtonMenu{} and \ButtonSelect{} simultaneously}%
|
|
\opt{IPOD_3G_PAD}{\ButtonMenu{} and \ButtonPlay{} simultaneously}%
|
|
\opt{SANSA_E200_PAD,SANSA_C200_PAD,IAUDIO_X5_PAD,IAUDIO_M5_PAD}
|
|
{\ButtonPower} until the \dap{} shuts off or reboots.
|
|
}%
|
|
\opt{IRIVER_H100_PAD,IRIVER_H300_PAD,IAUDIO_M3_PAD,IRIVER_H10_PAD,MROBE100_PAD
|
|
,PBELL_VIBE500_PAD,MPIO_HD200_PAD,MPIO_HD300_PAD,SAMSUNG_YH92X_PAD%
|
|
,SAMSUNG_YH820_PAD,XDUOO_X3_PAD}{%
|
|
In the unlikely event of a software failure, a hardware reset can be
|
|
performed by inserting a paperclip gently into the Reset hole.
|
|
}%
|
|
|
|
\nopt{gigabeatf,iaudiom3,iaudiom5,iaudiox5}
|
|
{
|
|
\subsection{Starting the original firmware}
|
|
\label{ref:Dualboot}
|
|
\opt{ipod4g,ipodcolor,ipodvideo,ipodnano,ipodnano2g,ipodmini}
|
|
{
|
|
Rockbox has a dual-boot feature. To boot into the original firmware, shut
|
|
down the device as described above. Turn on the \ButtonHold{} switch
|
|
immediately after turning the player on. The Apple logo will
|
|
display for a few seconds as Rockbox loads the original firmware.
|
|
|
|
You can also load the original firmware by shutting down the device,
|
|
then clicking the \ButtonHold{} switch on and connecting the iPod
|
|
to your computer.
|
|
|
|
Regardless of which method you use to boot to the original firmware, you can
|
|
return to Rockbox by pressing and holding \ButtonMenu{} and \ButtonSelect{}
|
|
simultaneously until the player hard resets.
|
|
}
|
|
|
|
\opt{ipod1g2g,ipod3g}
|
|
{
|
|
Rockbox has a dual-boot feature. To boot into the original firmware, shut
|
|
down the device as described above. Turn on the \ButtonHold{} switch
|
|
immediately after turning the player on. The Apple logo will
|
|
display for a few seconds as Rockbox loads the original firmware.
|
|
|
|
You can also load the original firmware by shutting down the device,
|
|
then clicking the \ButtonHold{} switch on and connecting the iPod
|
|
to your computer.
|
|
|
|
Regardless of which method you use to boot to the original firmware, you can
|
|
return to Rockbox by pressing and holding \ButtonMenu{} and \ButtonPlay{}
|
|
simultaneously until the player hard resets.
|
|
}
|
|
|
|
\opt{iriverh100,iriverh300}
|
|
{
|
|
Rockbox has a dual-boot feature. To boot into the original firmware,
|
|
when the \dap{} is turned off, press and hold the \ButtonRec{} button,
|
|
and then press the \ButtonOn{} button.
|
|
}
|
|
\opt{fuzeplus}
|
|
{
|
|
Rockbox has a dual-boot feature. To boot into the original firmware,
|
|
when the \dap{} is turned off, press and hold the \ButtonVolDown{} button,
|
|
and then press and hold the \ButtonPower{} button while keeping the
|
|
\ButtonVolDown{} button pressed. After 5 to 10 seconds the original
|
|
firmware should boot.
|
|
|
|
It is also possible to connect your \dap{} to your computer using the
|
|
original firmware. To do so you may press and hold the \ButtonVolDown{}
|
|
button and connect your device to the computer while keeping the
|
|
\ButtonVolDown{} button pressed. After 5 to 10 seconds the original
|
|
firmware should boot into USB mode.
|
|
}
|
|
\opt{mpiohd200,mpiohd300}
|
|
{
|
|
Rockbox has a dual-boot feature. To boot into the original firmware,
|
|
when the \dap{} is turned off, press and hold the \ButtonRec{} button,
|
|
and then press the \ButtonPlay{} button. This will bring you to the
|
|
short menu where you can choose among: Boot Rockbox, Boot MPIO firmware
|
|
and Shutdown. Select the option you need with \ButtonRew{} and \ButtonFF{}
|
|
and confirm with long \ButtonPlay{}.
|
|
}
|
|
\opt{iriverh10,iriverh10_5gb}
|
|
{
|
|
Rockbox has a dual-boot feature. It loads the original firmware from
|
|
the file \fname{/System/OF.mi4}. To boot into the original firmware,
|
|
press and hold the \ButtonLeft{} button while turning on the player.
|
|
\note{The iriver firmware does not shut down properly when you turn it off,
|
|
it only goes to sleep. To get back into Rockbox when exiting from the
|
|
iriver firmware, you will need to reset the player by \opt{iriverh10}{%
|
|
inserting a pin in the reset hole}\opt{iriverh10_5gb}{removing and
|
|
reinserting the battery}.}
|
|
}
|
|
|
|
\opt{sansa,sansaAMS}
|
|
{
|
|
Rockbox has a dual-boot feature. To boot into the original firmware,
|
|
press and hold the \ButtonLeft{} button while turning on the player.
|
|
}
|
|
|
|
\opt{clipv2,fuzev2,clipplus}
|
|
{
|
|
\note{Rockbox does not boot into the original firmware when powered by
|
|
a USB connection. Older versions of Rockbox do not provide USB support.
|
|
If you have such a version installed you need to manually boot into the
|
|
original firmware for data transfer via USB.}
|
|
}
|
|
|
|
\opt{mrobe100}
|
|
{
|
|
Rockbox has a dual-boot feature. It loads the original firmware from
|
|
the file \fname{/System/OF.mi4}. To boot into the original firmware,
|
|
when the \dap{} is turned off, press the \ButtonPower{} button once and then
|
|
a second time when the m:robe bootlogo (the headphone) appears. Hold the
|
|
\ButtonPower{} button until you see the ``Loading original firmware...''
|
|
message on the screen.
|
|
}
|
|
|
|
\opt{gigabeats}
|
|
{
|
|
Rockbox has a dual-boot feature. To boot into the original firmware,
|
|
turn the \ButtonHold{} switch on just after turning on the \dap{}.
|
|
To return to Rockbox, shutdown the \dap{}, then turn the battery switch
|
|
on the bottom off then on again. Rockbox should now start.
|
|
}
|
|
|
|
\opt{cowond2}
|
|
{
|
|
Use \ButtonPower{} to boot the original \playerman{} firmware.
|
|
}
|
|
|
|
\opt{vibe500}
|
|
{
|
|
Rockbox has a dual-boot feature where it is possible to load the original firmware from
|
|
the file \fname{/System/OF.mi4}. To boot into the original firmware press and release
|
|
\ButtonPower{} and then immediately after the backlight turns on, press the \ButtonOK{}
|
|
button and keep it pressed until the original firmware starts.
|
|
}
|
|
|
|
\opt{samsungyh}
|
|
{
|
|
Rockbox has a dual-boot feature. It loads the original firmware from
|
|
the file \fname{/System/OF.mi4}. To boot into the original firmware, press and hold
|
|
for awhile the \ButtonPlay{} button and then immediately after the Samsung logo appears,
|
|
press the \ButtonLeft{} button and keep it pressed until the original firmware starts.
|
|
}
|
|
|
|
\opt{ondavx777}
|
|
{
|
|
Rockbox has a dual-boot feature where it is possible to load the original firmware from
|
|
the file \fname{/SD/ccpmp.bin}. To boot into the original firmware press and release
|
|
\ButtonPower{} immediately after the Rockbox Logo appear on the screen.
|
|
}
|
|
|
|
\opt{xduoox3}
|
|
{
|
|
Rockbox has a dual-boot feature. To boot into the original firmware,
|
|
when the \dap{} is turned off, set the \ButtonLock{} switch to locked,
|
|
and then press the \ButtonPower{} button.
|
|
}
|
|
|
|
\opt{fiiom3k,shanlingq1,erosqnative}
|
|
{
|
|
Rockbox has a dual-boot feature. To boot into the original firmware,
|
|
hold \ActionBootOFPlayer{} when powering on the \dap{}.
|
|
|
|
\nopt{erosqnative}{
|
|
You can trigger a normal \playerman{} firmware update by holding
|
|
\ActionBootOFRecovery{} when powering on the \dap{}.
|
|
\warn{Updating the original firmware will \textbf{erase} the Rockbox
|
|
bootloader.}
|
|
}
|
|
|
|
\subsection{Entering the recovery menu}
|
|
You can access the Rockbox bootloader's ``recovery menu'' by holding
|
|
\ActionBootRecoveryMenu{}. This menu can be used to connect your \dap{}
|
|
over USB to transfer files, update the Rockbox bootloader, or revert to a
|
|
bootloader you've previously backed up.
|
|
}
|
|
|
|
}
|
|
\subsection{Putting music on your \dap{}}
|
|
|
|
\opt{usb_hid}{
|
|
\note{Due to a bug in some OS X versions, the \dap{} can not be mounted, unless
|
|
the USB HID feature is disabled. See \reference{ref:USB_HID} for more
|
|
information.\newline
|
|
}
|
|
}
|
|
|
|
With the \dap{} connected to the computer as an MSC/UMS device (like a
|
|
USB Drive), music files can be put on the player via any standard file
|
|
transfer method that you would use to copy files between drives (e.g. Drag-and-Drop).
|
|
Files may be placed wherever you like on the \dap{}, but it is strongly
|
|
suggested \emph{NOT} to put them in the \fname{/.rockbox} folder and instead
|
|
put them in any other folder, e.g. \fname{/}, \fname{/music} or \fname{/audio}.
|
|
The default directory structure that is assumed by some parts of Rockbox
|
|
\opt{albumart}{%
|
|
(album art searching, and missing-tag fallback in some WPSes) uses the
|
|
parent directory of a song as the Album name, and the parent directory of
|
|
that folder as the Artist name. WPSes may display information incorrectly if
|
|
your files are not properly tagged, and you have your music organized in a
|
|
way different than they assume when attempting to guess the Artist and Album
|
|
names from your filetree. See \reference{ref:album_art} for the requirements
|
|
for Album Art to work properly.
|
|
}%
|
|
\nopt{albumart}{%
|
|
(missing-tag fallback in some WPSes) uses the parent directory of a song
|
|
as the Album name, and the parent directory of that folder as the Artist
|
|
name. WPSes may display
|
|
information incorrectly if your files are not properly tagged, and you have
|
|
your music organized in a way different than they assume when attempting to
|
|
guess the Artist and Album names from your filetree.
|
|
}%
|
|
See \reference{ref:Supportedaudioformats} for a list of supported audio
|
|
formats.
|
|
|
|
\subsection{The first contact}
|
|
|
|
After you have first started the \dap{}, you'll be presented by the
|
|
\setting{Main Menu}. From this menu you can reach every function of Rockbox,
|
|
for more information (see \reference{ref:main_menu}). To browse the files
|
|
on your \dap{}, select \setting{Files} (see \reference{ref:file_browser}), and to
|
|
browse in a view that is based on the meta-data\footnote{ID3 Tags, Vorbis
|
|
comments, etc.} of your audio files, select \setting{Database} (see
|
|
\reference{ref:database}).
|
|
|
|
\subsection{Basic controls}
|
|
When browsing files and moving through menus you usually get a list view
|
|
presented. The navigation in these lists are usually the same and should be
|
|
pretty intuitive.
|
|
In the tree view use \ActionStdNext{} and \ActionStdPrev{} to move around
|
|
the selection. Use \ActionStdOk{} to select an item. \opt{wheel_acceleration}{
|
|
Note that the scroll speed is accelerating the faster you rotate the wheel.}
|
|
When browsing the file system selecting an audio file plays it. The view
|
|
switches to the ``While playing screen'', usually abbreviated as ``WPS'' (see
|
|
\reference{ref:WPS}. The dynamic playlist gets replaced with the contents of
|
|
the current directory. This way you can easily treat directories as playlists.
|
|
The created dynamic playlist can be extended or modified while playing. This is
|
|
also known as ``on-the-fly playlist''.
|
|
To go back to the \setting{File Browser} stop the playback with the
|
|
\ActionWpsStop{} button or return to the file browser while keeping playback
|
|
running using \ActionWpsBrowse{}.
|
|
In list views you can go back one step with \ActionTreeParentDirectory.
|
|
|
|
\subsection{Basic concepts}
|
|
\subsubsection{Playlists}
|
|
Rockbox is playlist oriented. This means that every time you play an audio file,
|
|
a so-called ``dynamic playlist'' is generated, unless you play a saved
|
|
playlist. You can modify the dynamic playlist while playing and also save
|
|
it to a file. If you do not want to use playlists you can simply play your
|
|
files directory based.
|
|
Playlists are covered in detail in \reference{ref:working_with_playlists}.
|
|
|
|
\subsubsection{Menu}
|
|
From the menu you can customise Rockbox. Rockbox itself is very customisable.
|
|
Also there are some special menus for quick access to frequently used
|
|
functions.
|
|
|
|
\subsubsection{Context Menu}
|
|
Some views, especially the file browser and the WPS have a context menu.
|
|
From the file browser this can be accessed with \ActionStdContext{}.
|
|
The contents of the context menu vary, depending on the situation it gets
|
|
called. The context menu itself presents you with some operations you can
|
|
perform with the currently highlighted file. In the file browser this is
|
|
the file (or directory) that is highlighted by the cursor. From the WPS this is
|
|
the currently playing file. Also there are some actions that do not apply
|
|
to the current file but refer to the screen from which the context menu
|
|
gets called. One example is the playback menu, which can be called using
|
|
the context menu from within the WPS.
|
|
|
|
\section{Customising Rockbox}
|
|
Rockbox' User Interface can be customised using ``Themes''. Themes usually
|
|
only affect the visual appearance, but an advanced user can create a theme
|
|
that also changes various other settings like file view, LCD settings and
|
|
all other settings that can be modified using \fname{.cfg} files. This topic
|
|
is discussed in more detail in \reference{ref:manage_settings}.
|
|
The Rockbox distribution comes with some themes that should look nice on
|
|
your \dap{}.
|
|
|
|
\note{Some of the themes shipped with Rockbox need additional
|
|
fonts from the fonts package, so make sure you installed them.
|
|
Also, if you downloaded additional themes from the Internet make sure you
|
|
have the needed fonts installed as otherwise the theme may not display
|
|
properly.}
|
|
|
|
\opt{usb_power}{
|
|
\section{USB Charging}
|
|
Your \dap{} will automatically charge when connected to USB. By default
|
|
Rockbox will connect in mass storage mode to transfer files, but you can
|
|
prevent this by holding down any button while plugging in the USB cable,
|
|
or by changing the \setting{USB Mode} setting to \setting{Charge Only}.
|
|
\nopt{fuzeplus}{
|
|
\note{Be aware that holding a button may still perform its normal function,
|
|
so it is recommended to use a button without harmful side effects, such as
|
|
\ActionStdUsbCharge{}.}
|
|
}
|
|
}
|
|
|
|
\input{rockbox_interface/browsing_and_playing.tex}
|