Rafaël Carré 0b6d65b09e Sansa AMS: Use a valid PLL setting (248MHz aka maximum fclk) ... Fix lcd drivers which stopped working after changing the PLL. Move set_cpu_frequency() to a place where it is actually used. Remove enable_irq() call already done by the bootloader git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19276 a1c6a512-1295-4272-9138-f99709370657		2008-11-30 16:36:32 +00:00
..
backlight-target.h	e200v2: implement the backlight handling (copy/paste from the c200v1/e200v1 code - this should probably be unified, along with other upcoming v2 code), plus clean up the lcd init by calling lcd_init() directly in the bootloader, instead of lcd_init_device().	2008-10-29 01:42:03 +00:00
button-e200v2.c	FS#9532 - e200v2 buttons	2008-11-07 05:31:05 +00:00
button-target.h	Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip.	2008-10-19 14:11:01 +00:00
lcd-e200v2.c	Sansa AMS: Use a valid PLL setting (248MHz aka maximum fclk)	2008-11-30 16:36:32 +00:00