781e3e3b1e
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30441 a1c6a512-1295-4272-9138-f99709370657
733 lines
23 KiB
C
733 lines
23 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2011 by Marcin Bukat
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#include "config.h"
|
|
#include "usb.h"
|
|
#include "usb-target.h"
|
|
#include "usb_drv.h"
|
|
|
|
#include "cpu.h"
|
|
#include "system.h"
|
|
#include "kernel.h"
|
|
#include "panic.h"
|
|
|
|
//#include "usb-s3c6400x.h"
|
|
|
|
#include "usb_ch9.h"
|
|
#include "usb_core.h"
|
|
#include <inttypes.h>
|
|
#include "power.h"
|
|
|
|
#include "logf.h"
|
|
|
|
typedef volatile uint32_t reg32;
|
|
|
|
/* Bulk OUT: ep1, ep4, ep7, ep10, ep13 */
|
|
#define BOUT_RXSTAT(ep_num) (*(reg32*)(AHB0_UDC+0x54+0x38*(ep_num/3)))
|
|
#define BOUT_RXCON(ep_num) (*(reg32*)(AHB0_UDC+0x58+0x38*(ep_num/3)))
|
|
#define BOUT_DMAOUTCTL(ep_num) (*(reg32*)(AHB0_UDC+0x5C+0x38*(ep_num/3)))
|
|
#define BOUT_DMAOUTLMADDR(ep_num) (*(reg32*)(AHB0_UDC+0x60+0x38*(ep_num/3)))
|
|
|
|
/* Bulk IN: ep2, ep5, ep8, ep11, ep4 */
|
|
#define BIN_TXSTAT(ep_num) (*(reg32*)(AHB0_UDC+0x64+0x38*(ep_num/3)))
|
|
#define BIN_TXCON(ep_num) (*(reg32*)(AHB0_UDC+0x68+0x38*(ep_num/3)))
|
|
#define BIN_TXBUF(ep_num) (*(reg32*)(AHB0_UDC+0x6C+0x38*(ep_num/3)))
|
|
#define BIN_DMAINCTL(ep_num) (*(reg32*)(AHB0_UDC+0x70+0x38*(ep_num/3)))
|
|
#define BIN_DMAINLMADDR(ep_num) (*(reg32*)(AHB0_UDC+0x74+0x38*(ep_num/3)))
|
|
|
|
/* INTERRUPT IN: ep3, ep6, ep9, ep12, ep15 */
|
|
#define IIN_TXSTAT(ep_num) (*(reg32*)(AHB0_UDC+0x78+0x38*((ep_num/3)-1)))
|
|
#define IIN_TXCON(ep_num) (*(reg32*)(AHB0_UDC+0x7C+0x38*((ep_num/3)-1)))
|
|
#define IIN_TXBUF(ep_num) (*(reg32*)(AHB0_UDC+0x80+0x38*((ep_num/3)-1)))
|
|
#define IIN_DMAINCTL(ep_num) (*(reg32*)(AHB0_UDC+0x84+0x38*((ep_num/3)-1)))
|
|
#define IIN_DMAINLMADDR(ep_num) (*(reg32*)(AHB0_UDC+0x88+0x38*((ep_num/3)-1)))
|
|
|
|
#ifdef LOGF_ENABLE
|
|
#define XFER_DIR_STR(dir) ((dir) ? "IN" : "OUT")
|
|
#endif
|
|
|
|
struct endpoint_t {
|
|
const int type; /* EP type */
|
|
const int dir; /* DIR_IN/DIR_OUT */
|
|
bool allocated; /* flag to mark EPs taken */
|
|
volatile void *buf; /* tx/rx buffer address */
|
|
volatile int len; /* size of the transfer (bytes) */
|
|
volatile int cnt; /* number of bytes transfered/received */
|
|
volatile bool block; /* flag indicating that transfer is blocking */
|
|
struct semaphore complete; /* semaphore for blocking transfers */
|
|
};
|
|
|
|
static struct endpoint_t ctrlep[2] = {
|
|
{USB_ENDPOINT_XFER_CONTROL, DIR_OUT, true, NULL, 0, 0, true},
|
|
{USB_ENDPOINT_XFER_CONTROL, DIR_IN, true, NULL, 0, 0, true}
|
|
};
|
|
|
|
static struct endpoint_t endpoints[16] = {
|
|
{USB_ENDPOINT_XFER_CONTROL, 3, true, NULL, 0, 0, true}, /* stub */
|
|
{USB_ENDPOINT_XFER_BULK, DIR_OUT, false, NULL, 0, 0, false}, /* BOUT1 */
|
|
{USB_ENDPOINT_XFER_BULK, DIR_IN, false, NULL, 0, 0, false}, /* BIN2 */
|
|
{USB_ENDPOINT_XFER_INT, DIR_IN, false, NULL, 0, 0, false}, /* IIN3 */
|
|
{USB_ENDPOINT_XFER_BULK, DIR_OUT, false, NULL, 0, 0, false}, /* BOUT4 */
|
|
{USB_ENDPOINT_XFER_BULK, DIR_IN, false, NULL, 0, 0, false}, /* BIN5 */
|
|
{USB_ENDPOINT_XFER_INT, DIR_IN, false, NULL, 0, 0, false}, /* IIN6 */
|
|
{USB_ENDPOINT_XFER_BULK, DIR_OUT, false, NULL, 0, 0, false}, /* BOUT7 */
|
|
{USB_ENDPOINT_XFER_BULK, DIR_IN, false, NULL, 0, 0, false}, /* BIN8 */
|
|
{USB_ENDPOINT_XFER_INT, DIR_IN, false, NULL, 0, 0, false}, /* IIN9 */
|
|
{USB_ENDPOINT_XFER_BULK, DIR_OUT, false, NULL, 0, 0, false}, /* BOUT10 */
|
|
{USB_ENDPOINT_XFER_BULK, DIR_IN, false, NULL, 0, 0, false}, /* BIN11 */
|
|
{USB_ENDPOINT_XFER_INT, DIR_IN, false, NULL, 0, 0, false}, /* IIN12 */
|
|
{USB_ENDPOINT_XFER_BULK, DIR_OUT, false, NULL, 0, 0, false}, /* BOUT13 */
|
|
{USB_ENDPOINT_XFER_BULK, DIR_IN, false, NULL, 0, 0, false}, /* BIN14 */
|
|
{USB_ENDPOINT_XFER_INT, DIR_IN, false, NULL, 0, 0, false}, /* IIN15 */
|
|
};
|
|
|
|
static void setup_received(void)
|
|
{
|
|
static uint32_t setup_data[2];
|
|
|
|
/* copy setup data from packet */
|
|
setup_data[0] = SETUP1;
|
|
setup_data[1] = SETUP2;
|
|
|
|
/* clear all pending control transfers
|
|
* do we need this here?
|
|
*/
|
|
|
|
/* pass setup data to the upper layer */
|
|
usb_core_control_request((struct usb_ctrlrequest*)setup_data);
|
|
}
|
|
|
|
/* service ep0 IN transaction */
|
|
static void ctr_write(void)
|
|
{
|
|
int xfer_size = (ctrlep[DIR_IN].cnt > 64) ? 64 : ctrlep[DIR_IN].cnt;
|
|
unsigned int timeout = current_tick + HZ/10;
|
|
|
|
while (TX0BUF & (1<<0)) /* TX0FULL flag */
|
|
{
|
|
if(TIME_AFTER(current_tick, timeout))
|
|
break;
|
|
}
|
|
|
|
TX0STAT = xfer_size; /* size of the transfer */
|
|
TX0DMALM_IADDR = (uint32_t)ctrlep[DIR_IN].buf; /* local buffer address */
|
|
TX0DMAINCTL = (1<<1); /* start DMA */
|
|
TX0CON &= ~(1<<2); /* clear NAK */
|
|
|
|
/* Decrement by max packet size is intentional.
|
|
* This way if we have final packet short one we will get negative len
|
|
* after transfer, which in turn indicates we *don't* need to send
|
|
* zero length packet. If the final packet is max sized packet we will
|
|
* get zero len after transfer which indicates we need to send
|
|
* zero length packet to signal host end of the transfer.
|
|
*/
|
|
ctrlep[DIR_IN].cnt -= 64;
|
|
ctrlep[DIR_IN].buf += xfer_size;
|
|
}
|
|
|
|
static void ctr_read(void)
|
|
{
|
|
int xfer_size = RX0STAT & 0xffff;
|
|
|
|
/* clear NAK bit */
|
|
RX0CON &= ~(1<<3);
|
|
|
|
ctrlep[DIR_OUT].cnt -= xfer_size;
|
|
ctrlep[DIR_OUT].buf += xfer_size;
|
|
|
|
RX0DMAOUTLMADDR = (uint32_t)ctrlep[DIR_OUT].buf;
|
|
RX0DMACTLO = (1<<0);
|
|
}
|
|
|
|
static void blk_write(int ep)
|
|
{
|
|
int ep_num = EP_NUM(ep);
|
|
int max = usb_drv_port_speed() ? 512 : 64;
|
|
int xfer_size = (endpoints[ep_num].cnt > max) ? max : endpoints[ep_num].cnt;
|
|
unsigned int timeout = current_tick + HZ/10;
|
|
|
|
while (BIN_TXBUF(ep_num) & (1<<0)) /* TXFULL flag */
|
|
{
|
|
if(TIME_AFTER(current_tick, timeout))
|
|
break;
|
|
}
|
|
|
|
BIN_TXSTAT(ep_num) = xfer_size; /* size of the transfer */
|
|
BIN_DMAINLMADDR(ep_num) = (uint32_t)endpoints[ep_num].buf; /* buf address */
|
|
BIN_DMAINCTL(ep_num) = (1<<0); /* start DMA */
|
|
BIN_TXCON(ep_num) &= ~(1<<2); /* clear NAK */
|
|
|
|
/* Decrement by max packet size is intentional.
|
|
* This way if we have final packet short one we will get negative len
|
|
* after transfer, which in turn indicates we *don't* need to send
|
|
* zero length packet. If the final packet is max sized packet we will
|
|
* get zero len after transfer which indicates we need to send
|
|
* zero length packet to signal host end of the transfer.
|
|
*/
|
|
endpoints[ep_num].cnt -= max;
|
|
endpoints[ep_num].buf += xfer_size;
|
|
}
|
|
|
|
static void blk_read(int ep)
|
|
{
|
|
int ep_num = EP_NUM(ep);
|
|
int xfer_size = BOUT_RXSTAT(ep_num) & 0xffff;
|
|
|
|
/* clear NAK bit */
|
|
BOUT_RXCON(ep_num) &= ~(1<<3);
|
|
|
|
endpoints[ep_num].cnt -= xfer_size;
|
|
endpoints[ep_num].buf += xfer_size;
|
|
|
|
BOUT_DMAOUTLMADDR(ep_num) = (uint32_t)endpoints[ep_num].buf;
|
|
BOUT_DMAOUTCTL(ep_num) = (1<<1);
|
|
}
|
|
|
|
static void int_write(int ep)
|
|
{
|
|
int ep_num = EP_NUM(ep);
|
|
int max = usb_drv_port_speed() ? 1024 : 64;
|
|
int xfer_size = (endpoints[ep_num].cnt > max) ? max : endpoints[ep_num].cnt;
|
|
unsigned int timeout = current_tick + HZ/10;
|
|
|
|
while (IIN_TXBUF(ep_num) & (1<<0)) /* TXFULL flag */
|
|
{
|
|
if(TIME_AFTER(current_tick, timeout))
|
|
break;
|
|
}
|
|
|
|
IIN_TXSTAT(ep_num) = xfer_size; /* size of the transfer */
|
|
IIN_DMAINLMADDR(ep_num) = (uint32_t)endpoints[ep_num].buf; /* buf address */
|
|
IIN_DMAINCTL(ep_num) = (1<<0); /* start DMA */
|
|
IIN_TXCON(ep_num) &= ~(1<<2); /* clear NAK */
|
|
|
|
/* Decrement by max packet size is intentional.
|
|
* This way if we have final packet short one we will get negative len
|
|
* after transfer, which in turn indicates we *don't* need to send
|
|
* zero length packet. If the final packet is max sized packet we will
|
|
* get zero len after transfer which indicates we need to send
|
|
* zero length packet to signal host end of the transfer.
|
|
*/
|
|
endpoints[ep_num].cnt -= max;
|
|
endpoints[ep_num].buf += xfer_size;
|
|
}
|
|
|
|
/* UDC ISR function */
|
|
void INT_UDC(void)
|
|
{
|
|
uint32_t txstat, rxstat;
|
|
int tmp, ep_num;
|
|
|
|
/* read what caused UDC irq */
|
|
uint32_t intsrc = INT2FLAG & 0x7fffff;
|
|
|
|
if (intsrc & (1<<1)) /* setup interrupt */
|
|
{
|
|
setup_received();
|
|
}
|
|
else if (intsrc & (1<<2)) /* ep0 in interrupt */
|
|
{
|
|
txstat = TX0STAT; /* read clears flags */
|
|
|
|
/* TODO handle errors */
|
|
if (txstat & (1<<18)) /* check TxACK flag */
|
|
{
|
|
if (ctrlep[DIR_IN].cnt >= 0)
|
|
{
|
|
/* we still have data to send (or ZLP) */
|
|
ctr_write();
|
|
}
|
|
else
|
|
{
|
|
/* final ack received */
|
|
usb_core_transfer_complete(0, /* ep */
|
|
USB_DIR_IN, /* dir */
|
|
0, /* status */
|
|
ctrlep[DIR_IN].len); /* length */
|
|
|
|
/* release semaphore for blocking transfer */
|
|
if (ctrlep[DIR_IN].block)
|
|
semaphore_release(&ctrlep[DIR_IN].complete);
|
|
}
|
|
}
|
|
}
|
|
else if (intsrc & (1<<3)) /* ep0 out interrupt */
|
|
{
|
|
rxstat = RX0STAT;
|
|
|
|
/* TODO handle errors */
|
|
if (rxstat & (1<<18)) /* RxACK */
|
|
{
|
|
if (ctrlep[DIR_OUT].cnt > 0)
|
|
ctr_read();
|
|
else
|
|
usb_core_transfer_complete(0, /* ep */
|
|
USB_DIR_OUT, /* dir */
|
|
0, /* status */
|
|
ctrlep[DIR_OUT].len); /* length */
|
|
}
|
|
}
|
|
else if (intsrc & (1<<4)) /* usb reset */
|
|
{
|
|
usb_drv_init();
|
|
}
|
|
else if (intsrc & (1<<5)) /* usb resume */
|
|
{
|
|
TX0CON |= (1<<0); /* TxClr */
|
|
TX0CON &= ~(1<<0);
|
|
RX0CON |= (1<<1); /* RxClr */
|
|
RX0CON &= (1<<1);
|
|
}
|
|
else if (intsrc & (1<<6)) /* usb suspend */
|
|
{
|
|
}
|
|
else if (intsrc & (1<<7)) /* usb connect */
|
|
{
|
|
}
|
|
else
|
|
{
|
|
/* lets figure out which ep generated irq */
|
|
tmp = intsrc >> 7;
|
|
for (ep_num=1; ep_num < 15; ep_num++)
|
|
{
|
|
tmp >>= ep_num;
|
|
if (tmp & 0x01)
|
|
break;
|
|
}
|
|
|
|
if (intsrc & ((1<<8)|(1<<11)|(1<<14)|(1<<17)|(1<<20)))
|
|
{
|
|
/* bulk out */
|
|
rxstat = BOUT_RXSTAT(ep_num);
|
|
|
|
/* TODO handle errors */
|
|
if (rxstat & (1<<18)) /* RxACK */
|
|
{
|
|
if (endpoints[ep_num].cnt > 0)
|
|
blk_read(ep_num);
|
|
else
|
|
usb_core_transfer_complete(ep_num, /* ep */
|
|
USB_DIR_OUT, /* dir */
|
|
0, /* status */
|
|
endpoints[ep_num].len); /* length */
|
|
}
|
|
}
|
|
else if (intsrc & ((1<<9)|(1<<12)|(1<<15)|(1<<18)|(1<<21)))
|
|
{
|
|
/* bulk in */
|
|
txstat = BIN_TXSTAT(ep_num);
|
|
|
|
/* TODO handle errors */
|
|
if (txstat & (1<<18)) /* check TxACK flag */
|
|
{
|
|
if (endpoints[ep_num].cnt >= 0)
|
|
{
|
|
/* we still have data to send (or ZLP) */
|
|
blk_write(ep_num);
|
|
}
|
|
else
|
|
{
|
|
/* final ack received */
|
|
usb_core_transfer_complete(ep_num, /* ep */
|
|
USB_DIR_IN, /* dir */
|
|
0, /* status */
|
|
endpoints[ep_num].len); /* length */
|
|
|
|
/* release semaphore for blocking transfer */
|
|
if (endpoints[ep_num].block)
|
|
semaphore_release(&endpoints[ep_num].complete);
|
|
}
|
|
}
|
|
}
|
|
else if (intsrc & ((1<<10)|(1<13)|(1<<16)|(1<<19)|(1<<22)))
|
|
{
|
|
/* int in */
|
|
txstat = IIN_TXSTAT(ep_num);
|
|
|
|
/* TODO handle errors */
|
|
if (txstat & (1<<18)) /* check TxACK flag */
|
|
{
|
|
if (endpoints[ep_num].cnt >= 0)
|
|
{
|
|
/* we still have data to send (or ZLP) */
|
|
int_write(ep_num);
|
|
}
|
|
else
|
|
{
|
|
/* final ack received */
|
|
usb_core_transfer_complete(ep_num, /* ep */
|
|
USB_DIR_IN, /* dir */
|
|
0, /* status */
|
|
endpoints[ep_num].len); /* length */
|
|
|
|
/* release semaphore for blocking transfer */
|
|
if (endpoints[ep_num].block)
|
|
semaphore_release(&endpoints[ep_num].complete);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* return port speed FS=0, HS=1 */
|
|
int usb_drv_port_speed(void)
|
|
{
|
|
return ((DEV_INFO & (3<<21)) == 0) ? 0 : 1;
|
|
}
|
|
|
|
/* Reserve endpoint */
|
|
int usb_drv_request_endpoint(int type, int dir)
|
|
{
|
|
int ep_num, ep_dir;
|
|
int ep_type;
|
|
|
|
/* Safety */
|
|
ep_dir = EP_DIR(dir);
|
|
ep_type = type & USB_ENDPOINT_XFERTYPE_MASK;
|
|
|
|
logf("req: %s %s", XFER_DIR_STR(ep_dir), XFER_TYPE_STR(ep_type));
|
|
|
|
/* Find an available ep/dir pair */
|
|
for (ep_num=1;ep_num<USB_NUM_ENDPOINTS;ep_num++)
|
|
{
|
|
struct endpoint_t* endpoint = &endpoints[ep_num];
|
|
|
|
if (endpoint->type == ep_type &&
|
|
endpoint->dir == ep_dir &&
|
|
!endpoint->allocated)
|
|
{
|
|
/* mark endpoint as taken */
|
|
endpoint->allocated = true;
|
|
|
|
/* enable interrupt from this endpoint */
|
|
EN_INT |= (1<<(ep_num+7));
|
|
|
|
logf("add: ep%d %s", ep_num, XFER_DIR_STR(ep_dir));
|
|
return (ep_num | (dir & USB_ENDPOINT_DIR_MASK));
|
|
}
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
/* Free endpoint */
|
|
void usb_drv_release_endpoint(int ep)
|
|
{
|
|
int ep_num = EP_NUM(ep);
|
|
int ep_dir = EP_DIR(ep);
|
|
|
|
logf("rel: ep%d %s", ep_num, XFER_DIR_STR(ep_dir));
|
|
endpoints[ep_num].allocated = false;
|
|
|
|
/* disable interrupt from this endpoint */
|
|
EN_INT &= ~(1<<(ep_num+7));
|
|
}
|
|
|
|
/* Set the address (usually it's in a register).
|
|
* There is a problem here: some controller want the address to be set between
|
|
* control out and ack and some want to wait for the end of the transaction.
|
|
* In the first case, you need to write some code special code when getting
|
|
* setup packets and ignore this function (have a look at other drives)
|
|
*/
|
|
void usb_drv_set_address(int address)
|
|
{
|
|
(void)address;
|
|
/* UDC seems to set this automaticaly */
|
|
}
|
|
|
|
static int _usb_drv_send(int endpoint, void *ptr, int length, bool block)
|
|
{
|
|
struct endpoint_t *ep;
|
|
int ep_num = EP_NUM(endpoint);
|
|
|
|
if (ep_num == 0)
|
|
ep = &ctrlep[DIR_IN];
|
|
else
|
|
ep = &endpoints[ep_num];
|
|
|
|
ep->buf = ptr;
|
|
ep->len = ep->cnt = length;
|
|
|
|
if (block)
|
|
ep->block = true;
|
|
else
|
|
ep->block = false;
|
|
|
|
switch (ep->type)
|
|
{
|
|
case USB_ENDPOINT_XFER_CONTROL:
|
|
ctr_write();
|
|
break;
|
|
|
|
case USB_ENDPOINT_XFER_BULK:
|
|
blk_write(ep_num);
|
|
break;
|
|
|
|
case USB_ENDPOINT_XFER_INT:
|
|
int_write(ep_num);
|
|
break;
|
|
}
|
|
|
|
if (block)
|
|
/* wait for transfer to end */
|
|
semaphore_wait(&ep->complete, TIMEOUT_BLOCK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Setup a send transfer. (blocking) */
|
|
int usb_drv_send(int endpoint, void *ptr, int length)
|
|
{
|
|
return _usb_drv_send(endpoint, ptr, length, true);
|
|
}
|
|
|
|
/* Setup a send transfer. (non blocking) */
|
|
int usb_drv_send_nonblocking(int endpoint, void *ptr, int length)
|
|
{
|
|
return _usb_drv_send(endpoint, ptr, length, false);
|
|
}
|
|
|
|
/* Setup a receive transfer. (non blocking) */
|
|
int usb_drv_recv(int endpoint, void* ptr, int length)
|
|
{
|
|
struct endpoint_t *ep;
|
|
int ep_num = EP_NUM(endpoint);
|
|
|
|
if (ep_num == 0)
|
|
{
|
|
ep = &ctrlep[DIR_OUT];
|
|
|
|
ctr_read();
|
|
}
|
|
else
|
|
{
|
|
ep = &endpoints[ep_num];
|
|
|
|
/* clear NAK bit */
|
|
BOUT_RXCON(ep_num) &= ~(1<<3);
|
|
BOUT_DMAOUTLMADDR(ep_num) = (uint32_t)ptr;
|
|
BOUT_DMAOUTCTL(ep_num) = (1<<1);
|
|
}
|
|
|
|
ep->buf = ptr;
|
|
ep->len = ep->cnt = length;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Kill all transfers. Usually you need to set a bit for each endpoint
|
|
* and flush fifos. You should also call the completion handler with
|
|
* error status for everything
|
|
*/
|
|
void usb_drv_cancel_all_transfers(void)
|
|
{
|
|
}
|
|
|
|
/* Set test mode, you can forget that for now, usually it's sufficient
|
|
* to bit copy the argument into some register of the controller
|
|
*/
|
|
void usb_drv_set_test_mode(int mode)
|
|
{
|
|
(void)mode;
|
|
}
|
|
|
|
/* Check if endpoint is in stall state */
|
|
bool usb_drv_stalled(int endpoint, bool in)
|
|
{
|
|
int ep_num = EP_NUM(endpoint);
|
|
|
|
switch (endpoints[ep_num].type)
|
|
{
|
|
case USB_ENDPOINT_XFER_CONTROL:
|
|
if (in)
|
|
return (TX0CON & (1<<1)) ? true : false;
|
|
else
|
|
return (RX0CON & (1<<2)) ? true : false;
|
|
|
|
break;
|
|
|
|
case USB_ENDPOINT_XFER_BULK:
|
|
if (in)
|
|
return (BIN_TXCON(ep_num) & (1<<1)) ? true : false;
|
|
else
|
|
return (BOUT_RXCON(ep_num) & (1<<2)) ? true : false;
|
|
|
|
break;
|
|
|
|
case USB_ENDPOINT_XFER_INT:
|
|
if (in)
|
|
return (IIN_TXCON(ep_num) & (1<<1)) ? true : false;
|
|
else
|
|
return false; /* we don't have such endpoint anyway */
|
|
|
|
break;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
/* Stall the endpoint. Usually set a flag in the controller */
|
|
void usb_drv_stall(int endpoint, bool stall, bool in)
|
|
{
|
|
int ep_num = EP_NUM(endpoint);
|
|
|
|
switch (endpoints[ep_num].type)
|
|
{
|
|
case USB_ENDPOINT_XFER_CONTROL:
|
|
if (in)
|
|
{
|
|
if (stall)
|
|
TX0CON |= (1<<1);
|
|
else
|
|
TX0CON &= ~(1<<1);
|
|
}
|
|
else
|
|
{
|
|
if (stall)
|
|
RX0CON |= (1<<2);
|
|
else
|
|
RX0CON &= ~(1<<2); /* doc says Auto clear by UDC 2.0 */
|
|
}
|
|
break;
|
|
|
|
case USB_ENDPOINT_XFER_BULK:
|
|
if (in)
|
|
{
|
|
if (stall)
|
|
BIN_TXCON(ep_num) |= (1<<1);
|
|
else
|
|
BIN_TXCON(ep_num) &= ~(1<<1);
|
|
}
|
|
else
|
|
{
|
|
if (stall)
|
|
BOUT_RXCON(ep_num) |= (1<<2);
|
|
else
|
|
BOUT_RXCON(ep_num) &= ~(1<<2);
|
|
}
|
|
break;
|
|
|
|
case USB_ENDPOINT_XFER_INT:
|
|
if (in)
|
|
{
|
|
if (stall)
|
|
IIN_TXCON(ep_num) |= (1<<1);
|
|
else
|
|
IIN_TXCON(ep_num) &= ~(1<<1);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* one time init (once per connection) - basicaly enable usb core */
|
|
void usb_drv_init(void)
|
|
{
|
|
int ep_num;
|
|
|
|
/* enable USB clock */
|
|
SCU_CLKCFG &= ~(1<<6);
|
|
|
|
/* 1. do soft disconnect */
|
|
DEV_CTL = (1<<3); /* DEV_SELF_PWR */
|
|
|
|
/* 2. do power on reset to PHY */
|
|
DEV_CTL = (1<<3) | /* DEV_SELF_PWR */
|
|
(1<<7); /* SOFT_POR */
|
|
|
|
/* 3. wait more than 10ms */
|
|
udelay(20000);
|
|
|
|
/* 4. clear SOFT_POR bit */
|
|
DEV_CTL &= ~(1<<7);
|
|
|
|
/* 5. configure minimal EN_INT */
|
|
EN_INT = (1<<6) | /* Enable Suspend Interrupt */
|
|
(1<<5) | /* Enable Resume Interrupt */
|
|
(1<<4) | /* Enable USB Reset Interrupt */
|
|
(1<<3) | /* Enable OUT Token receive Interrupt EP0 */
|
|
(1<<2) | /* Enable IN Token transmits Interrupt EP0 */
|
|
(1<<1); /* Enable SETUP Packet Receive Interrupt */
|
|
|
|
/* 6. configure INTCON */
|
|
INTCON = (1<<2) | /* interrupt high active */
|
|
(1<<0); /* enable EP0 interrupts */
|
|
|
|
/* 7. configure EP0 control registers */
|
|
TX0CON = (1<<6) | /* Set as one to enable the EP0 tx irq */
|
|
(1<<2); /* Set as one to response NAK handshake */
|
|
|
|
RX0CON = (1<<7) |
|
|
(1<<4) | /* Endpoint 0 Enable. When cleared the endpoint does
|
|
* not respond to an SETUP or OUT token
|
|
*/
|
|
|
|
(1<<3); /* Set as one to response NAK handshake */
|
|
|
|
/* 8. write final bits to DEV_CTL */
|
|
DEV_CTL = (1<<8) | /* Configure CSR done */
|
|
(1<<6) | /* 16-bit data path enabled. udc_clk = 30MHz */
|
|
(1<<4) | /* Device soft connect */
|
|
(1<<3); /* Device self power */
|
|
|
|
/* init semaphore of ep0 */
|
|
semaphore_init(&ctrlep[DIR_OUT].complete, 1, 0);
|
|
semaphore_init(&ctrlep[DIR_IN].complete, 1, 0);
|
|
|
|
for (ep_num = 1; ep_num < USB_NUM_ENDPOINTS; ep_num++)
|
|
{
|
|
semaphore_init(&endpoints[ep_num].complete, 1, 0);
|
|
|
|
if (ep_num%3 == 0) /* IIN 3, 6, 9, 12, 15 */
|
|
{
|
|
IIN_TXCON(ep_num) |= (ep_num<<8)|(1<<3)|(1<<2); /* ep_num, enable, NAK */
|
|
}
|
|
else if (ep_num%3 == 1) /* BOUT 1, 4, 7, 10, 13 */
|
|
{
|
|
BOUT_RXCON(ep_num) |= (ep_num<<8)|(1<<4)|(1<<3); /* ep_num, NAK, enable */
|
|
}
|
|
else if (ep_num%3 == 2) /* BIN 2, 5, 8, 11, 14 */
|
|
{
|
|
BIN_TXCON(ep_num) |= (ep_num<<8)|(1<<3)|(1<<2); /* ep_num, enable, NAK */
|
|
}
|
|
}
|
|
}
|
|
|
|
/* turn off usb core */
|
|
void usb_drv_exit(void)
|
|
{
|
|
DEV_CTL = (1<<3); /* DEV_SELF_PWR */
|
|
|
|
/* disable USB interrupts in interrupt controller */
|
|
INTC_IMR &= ~(1<<16);
|
|
INTC_IECR &= ~(1<<16);
|
|
|
|
/* we cannot disable UDC clock since this causes data abort
|
|
* when reading DEV_INFO in order to check usb connect event
|
|
*/
|
|
}
|
|
|
|
int usb_detect(void)
|
|
{
|
|
if (DEV_INFO & (1<<20))
|
|
return USB_INSERTED;
|
|
else
|
|
return USB_EXTRACTED;
|
|
}
|
|
|