Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/s5l8700/pcm-s5l8700.c
Bertrik Sikken 69b7dab5f0 pcm-s5l8700: add missing header file, remove out-of-date comment 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23612 a1c6a512-1295-4272-9138-f99709370657
2009-11-11 20:30:53 +00:00

401 lines
12 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright © 2009 Bertrik Sikken
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include <string.h>
#include "config.h"
#include "system.h"
#include "audio.h"
#include "s5l8700.h"
#include "panic.h"
#include "audiohw.h"
#include "pcm.h"
#include "pcm_sampr.h"
#include "dma-target.h"
#include "mmu-target.h"
/* Driver for the IIS/PCM part of the s5l8700 using DMA
Notes:
- not all possible PCM sample rates are enabled (no support in codec driver)
- pcm_play_dma_pause is untested, not sure if implemented the right way
- pcm_play_dma_stop is untested, not sure if implemented the right way
- recording is not implemented
*/
static volatile int locked = 0;
size_t nextsize;
size_t dblbufsize;
int dmamode;
const unsigned char* dblbuf;
/* table of recommended PLL/MCLK dividers for mode 256Fs from the datasheet */
static const struct div_entry {
int pdiv, mdiv, sdiv, cdiv;
} div_table[HW_NUM_FREQ] = {
#ifdef IPOD_NANO2G
[HW_FREQ_11] = { 2, 41, 5, 4},
[HW_FREQ_22] = { 2, 41, 4, 4},
[HW_FREQ_44] = { 2, 41, 3, 4},
[HW_FREQ_88] = { 2, 41, 2, 4},
#if 0 /* disabled because the codec driver does not support it (yet) */
[HW_FREQ_8 ] = { 2, 12, 3, 9},
[HW_FREQ_16] = { 2, 12, 2, 9},
[HW_FREQ_32] = { 2, 12, 1, 9},
[HW_FREQ_12] = { 2, 12, 4, 3},
[HW_FREQ_24] = { 2, 12, 3, 3},
[HW_FREQ_48] = { 2, 12, 2, 3},
[HW_FREQ_96] = { 2, 12, 1, 3},
#endif
#else
[HW_FREQ_11] = { 26, 189, 3, 8},
[HW_FREQ_22] = { 50, 98, 2, 8},
[HW_FREQ_44] = { 37, 151, 1, 9},
[HW_FREQ_88] = { 50, 98, 1, 4},
#if 0 /* disabled because the codec driver does not support it (yet) */
[HW_FREQ_8 ] = { 28, 192, 3, 12},
[HW_FREQ_16] = { 28, 192, 3, 6},
[HW_FREQ_32] = { 28, 192, 2, 6},
[HW_FREQ_12] = { 28, 192, 3, 8},
[HW_FREQ_24] = { 28, 192, 2, 8},
[HW_FREQ_48] = { 28, 192, 2, 4},
[HW_FREQ_96] = { 28, 192, 1, 4},
#endif
#endif
};
/* Mask the DMA interrupt */
void pcm_play_lock(void)
{
if (locked++ == 0) {
INTMSK &= ~(1 << 10);
}
}
/* Unmask the DMA interrupt if enabled */
void pcm_play_unlock(void)
{
if (--locked == 0) {
INTMSK |= (1 << 10);
}
}
static const void* dma_callback(void) ICODE_ATTR __attribute__((unused));
static const void* dma_callback(void)
{
if (dmamode)
{
unsigned char *dma_start_addr;
register pcm_more_callback_type get_more = pcm_callback_for_more;
if (get_more)
{
get_more(&dma_start_addr, &nextsize);
if (nextsize >= 4096)
{
dblbufsize = nextsize >> 4;
nextsize = nextsize - dblbufsize;
dblbuf = dma_start_addr + nextsize;
dmamode = 0;
}
nextsize = (nextsize >> 1) - 1;
clean_dcache();
return dma_start_addr;
}
else
{
nextsize = -1;
return 0;
}
}
else
{
dmamode = 1;
nextsize = (dblbufsize >> 1) - 1;
return dblbuf;
}
}
void fiq_handler(void) __attribute__((interrupt ("FIQ"), naked)) ICODE_ATTR;
void fiq_handler(void)
{
asm volatile (
"cmn r11, #1 \n"
"strne r10, [r8] \n" /* DMABASE0 */
"strne r11, [r8,#0x08] \n" /* DMATCNT0 */
"strne r9, [r8,#0x14] \n" /* DMACOM0 */
"moveq r10, #5 \n" /* STOP DMA */
"streq r10, [r8,#0x14] \n" /* DMACOM0 */
"mov r10, #7 \n" /* CLEAR IRQ */
"str r10, [r8,#0x14] \n" /* DMACOM0 */
"mov r11, #0x39C00000 \n" /* SRCPND */
"mov r10, #0x00000400 \n" /* INT_DMA */
"str r10, [r11] \n" /* ACK FIQ */
"stmfd sp!, {r0-r3,lr} \n"
"ldreq r0, =pcm_play_dma_stopped_callback \n"
"ldrne r0, =dma_callback \n"
"mov lr, pc \n"
"bx r0 \n"
"mov r10, r0 \n"
"ldmfd sp!, {r0-r3,lr} \n"
"ldr r11, =nextsize \n"
"ldr r11, [r11] \n"
"subs pc, lr, #4 \n"
);
}
void bootstrap_fiq(const void* addr, size_t tcnt) __attribute__((naked,noinline));
void bootstrap_fiq(const void* addr, size_t tcnt)
{
(void)addr;
(void)tcnt;
asm volatile (
"add r2, lr, #4 \n"
"mrs r3, cpsr \n"
"msr cpsr_c, #0xD1 \n" /* FIQ mode, IRQ/FIQ disabled */
"mov r8, #0x38400000 \n" /* DMA BASE */
"mov r9, #4 \n" /* START DMA */
"mov r10, r0 \n"
"mov r11, r1 \n"
"mov r0, #0 \n"
"ldr r12, =fiq_handler \n"
"ldr sp, =_fiqstackend \n"
"mov lr, r2 \n"
"msr spsr_all, r3 \n"
"bx r12 \n"
);
}
void pcm_play_dma_start(const void *addr_in, size_t size)
{
unsigned char* addr = (unsigned char*)addr_in;
/* S1: DMA channel 0 set */
DMACON0 = (0 << 30) | /* DEVSEL */
(1 << 29) | /* DIR */
(0 << 24) | /* SCHCNT */
(1 << 22) | /* DSIZE */
(0 << 19) | /* BLEN */
(0 << 18) | /* RELOAD */
(0 << 17) | /* HCOMINT */
(1 << 16) | /* WCOMINT */
(0 << 0); /* OFFSET */
#ifdef IPOD_NANO2G
PCON5 = (PCON5 & ~(0xFFFF0000)) | 0x77720000;
PCON6 = (PCON6 & ~(0x0F000000)) | 0x02000000;
I2STXCON = (1 << 20) | /* undocumented */
(0 << 16) | /* burst length */
(0 << 15) | /* 0 = falling edge */
(0 << 13) | /* 0 = basic I2S format */
(0 << 12) | /* 0 = MSB first */
(0 << 11) | /* 0 = left channel for low polarity */
(5 << 8) | /* MCLK divider */
(0 << 5) | /* 0 = 16-bit */
(2 << 3) | /* bit clock per frame */
(1 << 0); /* channel index */
#else
/* S2: IIS Tx mode set */
I2STXCON = (DMA_IISOUT_BLEN << 16) | /* burst length */
(0 << 15) | /* 0 = falling edge */
(0 << 13) | /* 0 = basic I2S format */
(0 << 12) | /* 0 = MSB first */
(0 << 11) | /* 0 = left channel for low polarity */
(3 << 8) | /* MCLK divider */
(0 << 5) | /* 0 = 16-bit */
(0 << 3) | /* bit clock per frame */
(1 << 0); /* channel index */
#endif
/* S3: DMA channel 0 on */
if (!size)
{
register pcm_more_callback_type get_more = pcm_callback_for_more;
if (get_more) get_more(&addr, &size);
else return; /* Nothing to play!? */
}
if (!size) return; /* Nothing to play!? */
clean_dcache();
if (size >= 4096)
{
dblbufsize = size >> 4;
size = size - dblbufsize;
dblbuf = addr + size;
dmamode = 0;
}
else dmamode = 1;
bootstrap_fiq(addr, (size >> 1) - 1);
/* S4: IIS Tx clock on */
I2SCLKCON = (1 << 0); /* 1 = power on */
/* S5: IIS Tx on */
I2STXCOM = (1 << 3) | /* 1 = transmit mode on */
(1 << 2) | /* 1 = I2S interface enable */
(1 << 1) | /* 1 = DMA request enable */
(0 << 0); /* 0 = LRCK on */
}
void pcm_play_dma_stop(void)
{
/* DMA channel off */
DMACOM0 = 5;
/* TODO Some time wait */
/* LRCK half cycle wait */
/* IIS Tx off */
I2STXCOM = (1 << 3) | /* 1 = transmit mode on */
(0 << 2) | /* 1 = I2S interface enable */
(1 << 1) | /* 1 = DMA request enable */
(0 << 0); /* 0 = LRCK on */
}
/* pause playback by disabling the I2S interface */
void pcm_play_dma_pause(bool pause)
{
if (pause) {
I2STXCOM |= (1 << 0); /* LRCK off */
}
else {
I2STXCOM &= ~(1 << 0); /* LRCK on */
}
}
void pcm_play_dma_init(void)
{
/* configure IIS pins */
#ifdef IPOD_NANO2G
PCON5 = (PCON5 & ~(0xFFFF0000)) | 0x22220000;
PCON6 = (PCON6 & ~(0x0F000000)) | 0x02000000;
#else
PCON7 = (PCON7 & ~(0x0FFFFF00)) | 0x02222200;
#endif
/* enable clock to the IIS module */
PWRCON &= ~(1 << 6);
/* Enable the DMA FIQ */
INTMOD |= (1 << 10);
INTMSK |= (1 << 10);
audiohw_preinit();
}
void pcm_postinit(void)
{
audiohw_postinit();
}
/* set the configured PCM frequency */
void pcm_dma_apply_settings(void)
{
// audiohw_set_frequency(pcm_sampr);
struct div_entry div = div_table[pcm_fsel];
PLLCON &= ~4;
PLLCON &= ~0x10;
PLLCON &= 0x3f;
PLLCON |= 4;
/* configure PLL1 and MCLK for the desired sample rate */
PLL1PMS = (div.pdiv << 16) |
(div.mdiv << 8) |
(div.sdiv << 0);
PLL1LCNT = 7500; /* no idea what to put here */
/* enable PLL1 and wait for lock */
PLLCON |= (1 << 1);
while ((PLLLOCK & (1 << 1)) == 0);
/* configure MCLK */
CLKCON = (CLKCON & ~(0xFF)) |
(0 << 7) | /* MCLK_MASK */
(2 << 5) | /* MCLK_SEL = PLL1 */
(1 << 4) | /* MCLK_DIV_ON */
(div.cdiv - 1); /* MCLK_DIV_VAL */
}
size_t pcm_get_bytes_waiting(void)
{
return (nextsize + DMACTCNT0 + 2) << 1;
}
const void * pcm_play_dma_get_peak_buffer(int *count)
{
*count = DMACTCNT0 >> 1;
return (void *)(((DMACADDR0 + 2) & ~3) | 0x40000000);
}
#ifdef HAVE_PCM_DMA_ADDRESS
void * pcm_dma_addr(void *addr)
{
if (addr != NULL)
addr = (void*)((uintptr_t)addr | 0x40000000);
return addr;
}
#endif
/****************************************************************************
** Recording DMA transfer
**/
#ifdef HAVE_RECORDING
void pcm_rec_lock(void)
{
}
void pcm_rec_unlock(void)
{
}
void pcm_record_more(void *start, size_t size)
{
(void)start;
(void)size;
}
void pcm_rec_dma_stop(void)
{
}
void pcm_rec_dma_start(void *addr, size_t size)
{
(void)addr;
(void)size;
}
void pcm_rec_dma_close(void)
{
}
void pcm_rec_dma_init(void)
{
}
const void * pcm_rec_dma_get_peak_buffer(int *count)
{
(void)count;
}
#endif /* HAVE_RECORDING */
Reference in a new issue View git blame Copy permalink