rockbox/utils/nwztools/plattools/nwz_power.h
Amaury Pouly 0a2290653b nwztools/plattools: rework/clean and add an all-in-one tool
This new tool (all_tools) embeds all the other tools and provides a menu to
choose which one to run.

Change-Id: I0e07864dd46559a7079b0f942c25155e6fa07112
2016-10-31 17:50:16 +01:00

115 lines
5.2 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2016 Amaury Pouly
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef __NWZ_POWER_H__
#define __NWZ_POWER_H__
/** power */
#define NWZ_POWER_DEV "/dev/icx_power"
#define NWZ_POWER_TYPE 'P'
/* ioctl request */
#define NWZ_POWER_GET_STATUS _IOR(NWZ_POWER_TYPE, 0, int *)
#define NWZ_POWER_SET_VBUS_LIMIT _IOW(NWZ_POWER_TYPE, 1, int *)
#define NWZ_POWER_GET_BAT_ADVAL _IOR(NWZ_POWER_TYPE, 2, int *)
#define NWZ_POWER_GET_BAT_GAUGE _IOR(NWZ_POWER_TYPE, 3, int *)
#define NWZ_POWER_ENABLE_CHARGER _IOW(NWZ_POWER_TYPE, 4, int *)
#define NWZ_POWER_ENABLE_DEBUG_PORT _IO (NWZ_POWER_TYPE, 5)
#define NWZ_POWER_IS_FULLY_CHARGED _IOR(NWZ_POWER_TYPE, 6, int *)
#define NWZ_POWER_AVG_VALUE _IO (NWZ_POWER_TYPE, 7)
#define NWZ_POWER_CONSIDERATION_CHARGE _IOW(NWZ_POWER_TYPE, 8, int)
#define NWZ_POWER_GET_VBUS_LIMIT _IOR(NWZ_POWER_TYPE, 9, int *)
#define NWZ_POWER_GET_CHARGE_SWITCH _IOR(NWZ_POWER_TYPE,10, int *)
#define NWZ_POWER_GET_SAMPLE_COUNT _IOR(NWZ_POWER_TYPE,11, int *)
#define NWZ_POWER_SET_CHARGE_CURRENT _IOW(NWZ_POWER_TYPE,12, int *)
#define NWZ_POWER_GET_CHARGE_CURRENT _IOR(NWZ_POWER_TYPE,13, int *)
#define NWZ_POWER_GET_VBUS_ADVAL _IOR(NWZ_POWER_TYPE,14, int *)
#define NWZ_POWER_GET_VSYS_ADVAL _IOR(NWZ_POWER_TYPE,15, int *)
#define NWZ_POWER_GET_VBAT_ADVAL _IOR(NWZ_POWER_TYPE,16, int *)
#define NWZ_POWER_CHG_VBUS_LIMIT _IOW(NWZ_POWER_TYPE,17, int *)
#define NWZ_POWER_SET_ACCESSARY_CHARGE_MODE _IOW(NWZ_POWER_TYPE,18, int *)
#define NWZ_POWER_GET_ACCESSARY_CHARGE_MODE _IOR(NWZ_POWER_TYPE,19, int *)
/* NWZ_POWER_GET_STATUS bitmap */
#define NWZ_POWER_STATUS_CHARGE_INIT 0x100 /* initializing charging */
#define NWZ_POWER_STATUS_CHARGE_STATUS 0x0c0 /* charging status mask */
#define NWZ_POWER_STATUS_VBUS_DET 0x020 /* vbus detected */
#define NWZ_POWER_STATUS_AC_DET 0x010 /* ac adapter detected */
#define NWZ_POWER_STATUS_CHARGE_LOW 0x001 /* full voltage of 4.1 instead of 4.2 */
/* NWZ_POWER_STATUS_CHARGING_MASK value */
#define NWZ_POWER_STATUS_CHARGE_STATUS_CHARGING 0xc0
#define NWZ_POWER_STATUS_CHARGE_STATUS_SUSPEND 0x80
#define NWZ_POWER_STATUS_CHARGE_STATUS_TIMEOUT 0x40
#define NWZ_POWER_STATUS_CHARGE_STATUS_NORMAL 0x00
/* base values to convert from adval to mV (represents mV for adval of 255) */
#define NWZ_POWER_AD_BASE_VBAT 4664
#define NWZ_POWER_AD_BASE_VBUS 7254
#define NWZ_POWER_AD_BASE_VSYS 5700
/* battery gauge */
#define NWZ_POWER_BAT_NOBAT -100 /* no battery */
#define NWZ_POWER_BAT_VERYLOW -99 /* very low */
#define NWZ_POWER_BAT_LOW 0 /* low */
#define NWZ_POWER_BAT_GAUGE0 1 /* ____ */
#define NWZ_POWER_BAT_GAUGE1 2 /* O___ */
#define NWZ_POWER_BAT_GAUGE2 3 /* OO__ */
#define NWZ_POWER_BAT_GAUGE3 4 /* OOO_ */
#define NWZ_POWER_BAT_GAUGE4 5 /* OOOO */
/* NWZ_POWER_GET_ACCESSARY_CHARGE_MODE */
#define NWZ_POWER_ACC_CHARGE_NONE 0
#define NWZ_POWER_ACC_CHARGE_VBAT 1
#define NWZ_POWER_ACC_CHARGE_VSYS 2
/** pminfo
*
* This driver seems to collect the state of the device on boot. Thus one
* can know if a key was pressed when booting for example.
*/
#define NWZ_PMINFO_DEV "/dev/icx_pminfo"
#define NWZ_PMINFO_TYPE 'b'
/* ioctl request */
#define NWZ_PMINFO_GET_FACTOR _IOR(NWZ_PMINFO_TYPE, 0, unsigned int *)
#define NWZ_PMINFO_CLR_DETRSTFLG _IO(NWZ_PMINFO_TYPE, 1)
/* NWZ_PMINFO_GET_FACTOR bitmap
* WARNING this information may not apply to all players and some bits do not
* exists on some players */
#define ICX_PMINFO_FACTOR_RTC_WAL 0x20000000 /* RTC Weekly Alarm */
#define ICX_PMINFO_FACTOR_RTC_DAL 0x10000000 /* RTC Daily Alarm */
#define ICX_PMINFO_FACTOR_VBUS 0x08000000 /* VBUS in/out */
#define ICX_PMINFO_FACTOR_DC_POWER 0x04000000 /* AC Adaptor in/out */
#define ICX_PMINFO_FACTOR_USB_WAKE 0x01000000 /* USB Wake */
#define ICX_PMINFO_FACTOR_CHARGE 0x00400000 /* Charge */
#define ICX_PMINFO_FACTOR_CRADLE 0x00080000 /* Cradle in/out */
#define ICX_PMINFO_FACTOR_AB_EV 0x00008000 /* ab event */
#define ICX_PMINFO_FACTOR_NC_SW 0x00004000 /* nc switch */
#define ICX_PMINFO_FACTOR_HOLD_SW 0x00002000 /* hold switch */
#define ICX_PMINFO_FACTOR_KEY_PAD 0x00001000 /* keypad */
#define ICX_PMINFO_FACTOR_KEY_CODE 0x00000FFF /* keycode */
#endif /* __NWZ_POWER_H__ */