rockbox/firmware/target/arm/as3525/sansa-c200v2/backlight-c200v2.c
Tobias Diedrich 62ff88b717 Implement software pwm to control c200v2 display brightness.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25300 a1c6a512-1295-4272-9138-f99709370657
2010-03-23 05:27:32 +00:00

112 lines
2.8 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006 by Barry Wardell
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "backlight-target.h"
#include "system.h"
#include "lcd.h"
#include "backlight.h"
#include "ascodec-target.h"
#include "as3514.h"
int buttonlight_is_on = 0;
int backlight_is_on = 0;
static int backlight_level = 0;
/* logarithmic lookup table for brightness s*/
static const int brightness_table[MAX_BRIGHTNESS_SETTING+1] = {
0, 21, 47, 78, 118, 165, 224, 296, 386, 495, 630, 796, 1000
};
static void _ll_backlight_on(void)
{
GPIOA_PIN(5) = 1<<5;
}
static void _ll_backlight_off(void)
{
GPIOA_PIN(5) = 0;
}
void _backlight_pwm(int on)
{
if (on) {
_ll_backlight_on();
} else {
_ll_backlight_off();
}
}
bool _backlight_init(void)
{
GPIOA_DIR |= 1<<5;
return true;
}
void _backlight_set_brightness(int brightness)
{
backlight_level = brightness_table[brightness];
if (brightness > 0)
_backlight_on();
else
_backlight_off();
}
void _backlight_on(void)
{
#ifdef HAVE_LCD_ENABLE
lcd_enable(true); /* power on lcd + visible display */
#endif
if (!backlight_is_on)
_ll_backlight_on();
_set_timer2_pwm_ratio(backlight_level);
backlight_is_on = 1;
}
void _backlight_off(void)
{
backlight_is_on = 0;
_set_timer2_pwm_ratio(0);
_ll_backlight_off();
#ifdef HAVE_LCD_ENABLE
lcd_enable(false); /* power off visible display */
#endif
}
void _buttonlight_on(void)
{
/* Needed for buttonlight and MicroSD to work at the same time */
/* Turn ROD control on, as the OF does */
GPIOD_DIR |= (1<<7);
SD_MCI_POWER |= (1<<7);
GPIOD_PIN(7) = (1<<7);
buttonlight_is_on = 1;
}
void _buttonlight_off(void)
{
/* Needed for buttonlight and MicroSD to work at the same time */
/* Turn ROD control off, as the OF does */
SD_MCI_POWER &= ~(1<<7);
GPIOD_PIN(7) = 0;
GPIOD_DIR &= ~(1<<7);
buttonlight_is_on = 0;
}