| .. |
|
archos/av300
|
|
|
|
imx31
|
Gigabeat S: Define the used ADC channels, get the channel order correct, enable charge current channel conversion.
|
2008-04-27 22:35:24 +00:00 |
|
ipod
|
move some data around to place qh_array at the start of iram. This saves up to about 2k iram on PP
|
2008-04-20 18:43:47 +00:00 |
|
iriver
|
move some data around to place qh_array at the start of iram. This saves up to about 2k iram on PP
|
2008-04-20 18:43:47 +00:00 |
|
olympus
|
m:robe 100 - backlight PWM fading
|
2008-04-25 20:06:42 +00:00 |
|
pnx0101
|
explicitly align the ibss section by adjusting _iramend - fixes hang on m:robe (and potential problem on other arm targets)
|
2008-04-07 18:24:23 +00:00 |
|
s3c2440
|
Add in a few more debug registers
|
2008-04-23 01:34:32 +00:00 |
|
sandisk
|
move some data around to place qh_array at the start of iram. This saves up to about 2k iram on PP
|
2008-04-20 18:43:47 +00:00 |
|
tatung/tpj1022
|
Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).
|
2008-03-26 01:50:41 +00:00 |
|
tcc77x
|
Move the Telechips TCC77x SSD1815 LCD driver up a level in the target tree - it isn't specific to the DAX.
|
2008-04-27 08:30:14 +00:00 |
|
tcc780x
|
FS#8708: D2/m:robe500 touchscreen keymaps by Andreas Mueller.
|
2008-04-27 15:30:19 +00:00 |
|
tms320dm320
|
minor code policing and some warning removals
|
2008-04-25 21:44:18 +00:00 |
|
adc-pp5020.c
|
make mrobe100 work again
|
2008-02-10 16:06:01 +00:00 |
|
ata-as-arm.S
|
|
|
|
ata-pp5002.c
|
|
|
|
ata-pp5020.c
|
Restore a line accidentally removed by r15705
|
2007-11-20 07:52:37 +00:00 |
|
ata-target.h
|
|
|
|
audio-pp.c
|
Hopefully fix line-in recording on PortalPlayer targets (H10 in particular).
|
2007-11-11 23:41:54 +00:00 |
|
crt0-pp-bl.S
|
Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.
|
2007-11-27 01:20:26 +00:00 |
|
crt0-pp.S
|
Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.
|
2007-11-27 01:20:26 +00:00 |
|
ffs-arm.S
|
Add a complete priority inheritance implementation to the scheduler (all mutex ownership and queue_send calls are inheritable). Priorities are differential so that dispatch depends on the runnable range of priorities. Codec priority can therefore be raised in small steps (pcmbuf updated to enable). Simplify the kernel functions to ease implementation and use the same kernel.c for both sim and target (I'm tired of maintaining two ;_). 1) Not sure if a minor audio break at first buffering issue will exist on large-sector disks (the main mutex speed issue was genuinely resolved earlier). At this point it's best dealt with at the buffering level. It seems a larger filechunk could be used again. 2) Perhaps 64-bit sims will have some minor issues (finicky) but a backroll of the code of concern there is a 5-minute job. All kernel objects become incompatible so a full rebuild and update is needed.
|
2008-03-25 02:34:12 +00:00 |
|
i2c-pp.c
|
FS#8898 - Prefix AS3514 registers with AS3514_
|
2008-04-15 21:33:32 +00:00 |
|
i2c-telechips.c
|
D2: Implement battery voltage readout from PCF50606 (levels not yet calibrated). Adjust I2C delay to ensure this also works when boosted.
|
2008-04-12 16:18:28 +00:00 |
|
i2s-pp.c
|
Finish the conversion to packed i2s for PP502x. Karl Kurbjun-approved for Mini-1G. Simplify the pcm format selection #ifdefs.
|
2007-10-16 04:19:18 +00:00 |
|
lcd-as-memframe.S
|
More M:Robe work including a fix to lcd-as-memframe for larger screens thanks to Michael Sevakis. Also fixes simulator builds.
|
2007-10-21 23:12:17 +00:00 |
|
memcpy-arm.S
|
|
|
|
memmove-arm.S
|
|
|
|
memset-arm.S
|
|
|
|
memset16-arm.S
|
|
|
|
mmu-arm.c
|
This is a big chunk of code necessary to prepare for Gigabeat F flash loading and and implementation of rolo. There should be no noticible changes for the user. A new bootloader is not needed.
|
2008-04-22 04:34:25 +00:00 |
|
mmu-arm.h
|
This is a big chunk of code necessary to prepare for Gigabeat F flash loading and and implementation of rolo. There should be no noticible changes for the user. A new bootloader is not needed.
|
2008-04-22 04:34:25 +00:00 |
|
pcm-pp.c
|
Fix ticking noise on PP5002 introduced with tthe transfer optimisation in r17097.
|
2008-04-18 18:52:11 +00:00 |
|
system-arm.h
|
Optimized byte-swapping macros for ARMv6.
|
2008-04-16 20:44:10 +00:00 |
|
system-pp502x.c
|
Fix warning.
|
2008-04-19 16:48:01 +00:00 |
|
system-pp5002.c
|
Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.
|
2007-11-27 01:20:26 +00:00 |
|
system-target.h
|
Fix freezing of some builds on PP5002. The PP5002 needs the not-sleep-at 0xNNNNNNN0-addresses fix everywhere when caching is enabled, not only in core_sleep(). Introduced a pair of inline functions to sleep and wake cores on PP for consistency.
|
2008-04-20 17:53:05 +00:00 |
|
usb-drv-arc.c
|
move some data around to place qh_array at the start of iram. This saves up to about 2k iram on PP
|
2008-04-20 18:43:47 +00:00 |
|
usb-fw-pp502x.c
|
Make the inital connect problem go away on Gigabeat S. Would be nice if a better way were found but it works for me. Update the bootloader to have it work.
|
2008-04-20 03:30:57 +00:00 |
|
usb-fw-pp5002.c
|
|
|
|
usb-target.h
|
|
|
|
wmcodec-pp.c
|
Do some crackdown on kernel object reinitialization after they could be in use and use before initialization. For c200/e200: Be sure fat cache and ata locks are acquired in the proper order during hot swapping. Delay hotswap monitoring until after initial file mounting (address 2nd kobj concern + possible call of fat driver before init).
|
2008-03-12 10:03:52 +00:00 |
|
wmcodec-telechips.c
|
A few preparations for the D2 PCM driver: move driver up to TCC780x level, move FIQ handler into PCM driver, add some new register defines, and remove those goddamn warnings.
|
2008-04-21 20:16:18 +00:00 |
054c728c9c