Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm
History
Michael Giacomelli 054447f9e6 Commit FS#8379 by Andree Buschmann. Disables much of the remaining unneeded hardware on PP50xx targets (Ipods, Sansa, H10s, etc) resulting in a large savings in power and consequent increase in battery life. Results vary from target to target and from codec to codec, but we now approach the OF runtime on several PP devices. For now, leave base CPU clock at 30MHz, although further savings is possible with some codecs if clock is reduced. Additionally, fix battery capacity on c200 and use my measurements to improve runtime estimation for Sandisk targets. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16259 a1c6a512-1295-4272-9138-f99709370657
2008-02-10 05:39:20 +00:00
..
archos/av300
imx31 Oops. Tiny goof. 2008-02-09 08:05:01 +00:00
ipod Commit FS#8379 by Andree Buschmann. Disables much of the remaining unneeded hardware on PP50xx targets (Ipods, Sansa, H10s, etc) resulting in a large savings in power and consequent increase in battery life. Results vary from target to target and from codec to codec, but we now approach the OF runtime on several PP devices. For now, leave base CPU clock at 30MHz, although further savings is possible with some codecs if clock is reduced. Additionally, fix battery capacity on c200 and use my measurements to improve runtime estimation for Sandisk targets. 2008-02-10 05:39:20 +00:00
iriver H10-20GB: Commit the first patch in FS#8533 to fix the mpegplayer display problem where only half the data was reaching the display on some players. Two individuals report that it corrects it. 2008-02-01 02:02:38 +00:00
olympus/mrobe-100 mrobe 100: (1) device reset in system_init is same as H10. (2) make power_off actually work. 2008-02-03 00:04:02 +00:00
pnx0101 Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling. 2007-11-12 18:49:53 +00:00
s3c2440 Use the timeout API as a oneshot for headphone plug debouncing. Set at 1s for now which seems comfortable and was good for meg-fx but target-specific adjustment is easy enough (my 3G hp jack is dead so I can't check that one :( ). Do some minor rearrangements for init safety and consistency. 2008-01-27 21:13:04 +00:00
sandisk Use a fixed multiplier of 2^10 as required when calculating number of blocks. 2008-02-09 21:07:44 +00:00
tatung/tpj1022 Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling. 2007-11-12 18:49:53 +00:00
tcc77x Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling. 2007-11-12 18:49:53 +00:00
tcc780x D2: Add auto-detection of the SAMSUNG flash chips used in the 2/4/8Gb 2008-01-27 18:50:09 +00:00
tms320dm320 Finally, out goes struct spinlock for anything but mutiprocessor targets where it becomes a reenterable corelock. 2008-01-18 13:12:33 +00:00
adc-pp5020.c Commit FS#8379 by Andree Buschmann. Disables much of the remaining unneeded hardware on PP50xx targets (Ipods, Sansa, H10s, etc) resulting in a large savings in power and consequent increase in battery life. Results vary from target to target and from codec to codec, but we now approach the OF runtime on several PP devices. For now, leave base CPU clock at 30MHz, although further savings is possible with some codecs if clock is reduced. Additionally, fix battery capacity on c200 and use my measurements to improve runtime estimation for Sandisk targets. 2008-02-10 05:39:20 +00:00
ata-as-arm.S
ata-pp5002.c
ata-pp5020.c Restore a line accidentally removed by r15705 2007-11-20 07:52:37 +00:00
ata-target.h
audio-pp.c Hopefully fix line-in recording on PortalPlayer targets (H10 in particular). 2007-11-11 23:41:54 +00:00
crt0-pp-bl.S Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all. 2007-11-27 01:20:26 +00:00
crt0-pp.S Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all. 2007-11-27 01:20:26 +00:00
i2c-pp.c Portal player i2c driver: More struct spinlock phaseout. 2007-11-12 07:58:54 +00:00
i2c-telechips.c Initial Cowon D2 commit: 2008-01-14 22:04:48 +00:00
i2s-pp.c Finish the conversion to packed i2s for PP502x. Karl Kurbjun-approved for Mini-1G. Simplify the pcm format selection #ifdefs. 2007-10-16 04:19:18 +00:00
lcd-as-memframe.S More M:Robe work including a fix to lcd-as-memframe for larger screens thanks to Michael Sevakis. Also fixes simulator builds. 2007-10-21 23:12:17 +00:00
memcpy-arm.S
memmove-arm.S
memset-arm.S
memset16-arm.S
mmu-arm.c Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:Robe 2007-10-23 03:29:15 +00:00
mmu-arm.h Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:Robe 2007-10-23 03:29:15 +00:00
pcm-pp.c audio on the m:robe 100 2008-01-20 12:59:23 +00:00
system-arm.h
system-pp502x.c Commit FS#8379 by Andree Buschmann. Disables much of the remaining unneeded hardware on PP50xx targets (Ipods, Sansa, H10s, etc) resulting in a large savings in power and consequent increase in battery life. Results vary from target to target and from codec to codec, but we now approach the OF runtime on several PP devices. For now, leave base CPU clock at 30MHz, although further savings is possible with some codecs if clock is reduced. Additionally, fix battery capacity on c200 and use my measurements to improve runtime estimation for Sandisk targets. 2008-02-10 05:39:20 +00:00
system-pp5002.c Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all. 2007-11-27 01:20:26 +00:00
system-target.h Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all. 2007-11-27 01:20:26 +00:00
usb-drv-pp502x.c Added some error returns 2007-11-27 13:42:47 +00:00
usb-fw-pp502x.c Commit FS#8379 by Andree Buschmann. Disables much of the remaining unneeded hardware on PP50xx targets (Ipods, Sansa, H10s, etc) resulting in a large savings in power and consequent increase in battery life. Results vary from target to target and from codec to codec, but we now approach the OF runtime on several PP devices. For now, leave base CPU clock at 30MHz, although further savings is possible with some codecs if clock is reduced. Additionally, fix battery capacity on c200 and use my measurements to improve runtime estimation for Sandisk targets. 2008-02-10 05:39:20 +00:00
usb-fw-pp5002.c
usb-target.h
wmcodec-pp.c Commit FS#8379 by Andree Buschmann. Disables much of the remaining unneeded hardware on PP50xx targets (Ipods, Sansa, H10s, etc) resulting in a large savings in power and consequent increase in battery life. Results vary from target to target and from codec to codec, but we now approach the OF runtime on several PP devices. For now, leave base CPU clock at 30MHz, although further savings is possible with some codecs if clock is reduced. Additionally, fix battery capacity on c200 and use my measurements to improve runtime estimation for Sandisk targets. 2008-02-10 05:39:20 +00:00
wmcodec-telechips.c Initial Cowon D2 commit: 2008-01-14 22:04:48 +00:00