Miika Pekkarinen 698113d9db Prepare for a new bootloader 7-pre4 release for iriver H100 series. Synced to work properly with SVN, and hopefully fixed remote detection problem and audio thump for some users. Also pure H100/H115 should be supported now. Actual bootloaders will be released separately. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16252 a1c6a512-1295-4272-9138-f99709370657		2008-02-09 15:06:09 +00:00
..
common.c	Sansa C200 bootloader works fine, no need to be verbose anymore	2007-09-20 12:11:04 +00:00
common.h	In preparation for use with sansapatcher, change portalplayer bootloaders to read firmwares in mi4 format.	2007-03-16 14:28:00 +00:00
FILES	Initial check-in of work-in-progress iPod bootloader. Current targets are iPod Color/Photo and iPod Nano.	2005-11-08 00:52:39 +00:00
gigabeat-s.c	Gigabeat S: Interrupt enabled bootloader. Miscellaneous integration changes.	2008-02-08 02:20:05 +00:00
gigabeat.c	Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:Robe	2007-10-23 03:29:15 +00:00
iaudio_x5.c	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
ipod.c	Fix iPod Nano & Video bootloaders. Backlight uses sleep(), hence it must be initialised after kernel_init().	2007-11-21 21:28:46 +00:00
iriver_h300.c	* dont compile audio codec drivers for bootloader, as we dont need them -> saves time	2007-11-20 12:09:59 +00:00
main-e200r-installer.c	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
main-pp.c	Initial commit for the Olympus m:robe 100 port (PP5020). The LCD driver works. The ADC driver was copied from the H10 port (they can probably be combined later), but the battery readings aren't right and it shuts down. The touch pad buttons do not work. Install the bootloader and rockbox the H10 way. Still lots of work to do.	2008-01-09 07:24:43 +00:00
main.c	Prepare for a new bootloader 7-pre4 release for iriver H100 series. Synced to work properly with SVN, and hopefully fixed remote detection problem and audio thump for some users. Also pure H100/H115 should be supported now. Actual bootloaders will be released separately.	2008-02-09 15:06:09 +00:00
Makefile	Firmware "hacker" code for the e200r install so the full bootloader rom doesnt need to be written.	2007-09-09 11:20:20 +00:00
mrobe500.c	Show some more registers in the debug screen, fix the touchscreen when SCREEN_ROTATE is set.	2007-11-11 03:31:24 +00:00
SOURCES	Initial Cowon D2 commit:	2008-01-14 22:04:48 +00:00
telechips.c	Read ID codes & raw page data from D2 NAND flash (work in progress;	2008-01-25 21:37:59 +00:00
tpj1022.c	FS#6554 - Move bootloader code into a common file	2007-02-22 15:09:49 +00:00