Michael Sevakis b15a523870 e200v1/c200v1: Implement limited samplerate switching. Rates 24kHz and below are being a bear as far as minor crackling at higher amplitude-- leave them out for the time being since no solution is currently evident. 48, 44, 32 (rec rates 24, 22, 16) seem perfectly fine. I'm betting c200 is ok to include because it uses the same setup as e200. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27139 a1c6a512-1295-4272-9138-f99709370657		2010-06-26 10:07:17 +00:00
..
sansa-c200	FS#11335 by me: make ARM assembly functions thumb-friendly	2010-06-11 04:41:36 +00:00
sansa-e200	e200v1: What's the wheel deal? Rework wheel code to make it a bit more straightforward and increase control a bit. Change button interrupt to clear after bitflip. Use atomic GPIO bitwise macros for everything.	2010-06-22 03:11:45 +00:00
sansa-view	Add information gleaned from disassembling the main firmware image. Detect lcd type in use. Still no actual output	2009-07-17 20:40:40 +00:00
adc-target.h	Sansa AMS: use the AS3514 ADC driver	2008-11-10 20:55:56 +00:00
app.lds	FS#10756 - Free unused init code	2010-03-03 23:20:32 +00:00
audio-c200_e200.c	e200v1/c200v1: Implement limited samplerate switching. Rates 24kHz and below are being a bear as far as minor crackling at higher amplitude-- leave them out for the time being since no solution is currently evident. 48, 44, 32 (rec rates 24, 22, 16) seem perfectly fine. I'm betting c200 is ok to include because it uses the same setup as e200.	2010-06-26 10:07:17 +00:00
backlight-c200_e200.c	Remove the calls to backlight_lcd_sleep_countdown from target specific code and move it into backlight.c	2009-04-26 01:23:39 +00:00
backlight-target.h	Add software backlight fading for E100/H300/X5/D2, by Thomas Martitz and others - see FS#6800 for credits.	2008-11-26 08:26:13 +00:00
boot.lds	Fix a bunch of boot.lds files so that they build with newer ld. The stack/bss sections need NOLOAD. otherwise the linker would try to include those into the binary. I don't know why this ever worked with our current ld version.	2010-03-08 23:16:57 +00:00
power-c200_e200.c	lv24020lp tuner: On PP targets (c200/e200), use the atomic GPIO bitwise macros for the interface since it shares GPIOH with the clickwheel interrupt.	2010-06-22 04:00:34 +00:00
powermgmt-target.h	c200v1/e200v1: Add battery charging. This should be usable on v2 players but those should be evaluated for current, endpoint voltage and whether or not accurate battery readings may always be obtained (which determines algorithm setup and behavior).	2009-01-11 10:07:22 +00:00