| .. |
|
archos/av300
|
|
|
|
as3525
|
AMSSansa: Use single adc_read instead of multiple ascodec_reads to read voltage for display in View HW info.
|
2009-07-12 14:12:45 +00:00 |
|
at91sam
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
imx31
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
ipod
|
ARM asm LCD and ATA driver functions: Don't save r12 as it is a scratch reg. Saves a bit of stack and execution time.
|
2009-07-11 23:43:44 +00:00 |
|
iriver
|
ARM asm LCD and ATA driver functions: Don't save r12 as it is a scratch reg. Saves a bit of stack and execution time.
|
2009-07-11 23:43:44 +00:00 |
|
olympus
|
ARM asm LCD and ATA driver functions: Don't save r12 as it is a scratch reg. Saves a bit of stack and execution time.
|
2009-07-11 23:43:44 +00:00 |
|
philips
|
ARM asm LCD and ATA driver functions: Don't save r12 as it is a scratch reg. Saves a bit of stack and execution time.
|
2009-07-11 23:43:44 +00:00 |
|
pnx0101
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
s3c2440
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
s5l8700
|
Get the Nano2G bootloader running - it now runs and displays a logo on one type of Nano2G LCD.
|
2009-07-16 00:57:02 +00:00 |
|
samsung
|
ARM asm LCD and ATA driver functions: Don't save r12 as it is a scratch reg. Saves a bit of stack and execution time.
|
2009-07-11 23:43:44 +00:00 |
|
sandisk
|
FS#10436 - add the Sansa View to the build system. The bootloader builds but doesn't do anything useful yet.
|
2009-07-13 21:09:39 +00:00 |
|
tatung/tpj1022
|
Fix duplicate #includes
|
2009-05-17 14:50:19 +00:00 |
|
tcc77x
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
tcc780x
|
D2: Remove unnecessary ide_power functions.
|
2009-07-10 20:02:35 +00:00 |
|
tms320dm320
|
M:Robe 500: fix a bug where the remote LCD was not properly sleeping
|
2009-07-08 14:30:03 +00:00 |
|
adc-as3514.c
|
|
|
|
adc-pp5020.c
|
|
|
|
ascodec-pp.c
|
|
|
|
ascodec-target.h
|
|
|
|
ata-as-arm.S
|
ARM asm LCD and ATA driver functions: Don't save r12 as it is a scratch reg. Saves a bit of stack and execution time.
|
2009-07-11 23:43:44 +00:00 |
|
ata-nand-telechips.c
|
Make the TCC NAND driver use the (virtual) disk activity LED.
|
2009-07-10 16:55:18 +00:00 |
|
ata-pp5002.c
|
Remove some unused declarations
|
2009-05-21 12:32:26 +00:00 |
|
ata-pp5020.c
|
3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work.
|
2009-05-25 21:10:45 +00:00 |
|
ata-sd-pp.c
|
Sansa AMS: display the virtual led icon on disk transfers
|
2009-07-06 16:44:57 +00:00 |
|
ata-target.h
|
Remove some unused declarations
|
2009-05-21 12:32:26 +00:00 |
|
audio-pp.c
|
|
|
|
crt0-pp-bl.S
|
|
|
|
crt0-pp.S
|
FS#9730 by Torne Wuff - support installing Rockbox in the firmware partition in place of the main Apple firmware. This image is only loaded if no rockbox.ipod is found so does not affect current behaviour. The advantage is a small increase in boottime. This patch also adds documentation to bootloader/ipod.c in the form of a comment describing the booting behaviour.
|
2009-05-12 20:41:44 +00:00 |
|
crt0.S
|
FS#10048 : enable MMU and data cache on Sansa AMS to give a major speed up
|
2009-06-08 23:05:33 +00:00 |
|
ffs-arm.S
|
|
|
|
i2c-pp.c
|
3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work.
|
2009-05-25 21:10:45 +00:00 |
|
i2c-telechips.c
|
Fix missing i2c mutex initialisation for telechips.
|
2009-06-21 13:26:32 +00:00 |
|
i2s-pp.c
|
|
|
|
kernel-pp.c
|
|
|
|
lcd-as-memframe.S
|
Apply some ARMv6 optimisations to YUV blitting. Speeds up mpegplayer on Gigabeat S by ~2% in undithered and ~7.5% in dithered mode.
|
2009-07-15 22:14:21 +00:00 |
|
lcd-c200_c200v2.c
|
Do not use lcd_blit_yuv() if MEMORYSIZE <= 2, since mpegplayer won't run anyway (and won't build)
|
2009-06-21 14:09:48 +00:00 |
|
lcd-ssd1815.c
|
|
|
|
memcpy-arm.S
|
|
|
|
memmove-arm.S
|
|
|
|
memset-arm.S
|
|
|
|
memset16-arm.S
|
|
|
|
mmu-arm.h
|
ARM922T's icache isn't coherent with its dcache, so we need to ensure that its flushed before changing codecs. Playback takes care of this for us, but only if we define cache coherency functions. Do that. Also, add a comment explaining that MMU functions need to be included so that other people don't spend hours chasing them in the future.
|
2009-07-05 01:17:25 +00:00 |
|
mmu-arm.S
|
|
|
|
pcm-pp.c
|
|
|
|
pcm-telechips.c
|
c100: Get a regular build compiling. Very little functionality.
|
2009-06-01 12:37:25 +00:00 |
|
powermgmt-ascodec.c
|
|
|
|
sd-pp-target.h
|
Merge tCardInfo struct (MMC) and tSDCardInfo struct (SD)
|
2009-07-01 10:07:22 +00:00 |
|
system-arm.c
|
|
|
|
system-arm.h
|
|
|
|
system-pp502x.c
|
Merge tCardInfo struct (MMC) and tSDCardInfo struct (SD)
|
2009-07-01 10:07:22 +00:00 |
|
system-pp5002.c
|
|
|
|
system-target.h
|
Remove some unused declarations
|
2009-05-21 12:32:26 +00:00 |
|
timer-pp.c
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
usb-drv-arc.c
|
Clarify comment and clean up a bit (FS#10227 by Tomer Shalev)
|
2009-05-23 14:50:30 +00:00 |
|
usb-fw-pp502x.c
|
3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work.
|
2009-05-25 21:10:45 +00:00 |
|
usb-fw-pp5002.c
|
|
|
|
usb-target.h
|
|
|
|
usb-tcc.c
|
Add working USB HID driver, by Tomer Shalev (part of his GSoC work).
|
2009-05-16 15:30:09 +00:00 |
|
wmcodec-pp.c
|
|
|
|
wmcodec-telechips.c
|
|
|
0270e4c591