| .. |
|
adc-imx31.c
|
Gigabeat S: Define the used ADC channels, get the channel order correct, enable charge current channel conversion.
|
2008-04-27 22:35:24 +00:00 |
|
adc-target.h
|
Gigabeat S: Define the used ADC channels, get the channel order correct, enable charge current channel conversion.
|
2008-04-27 22:35:24 +00:00 |
|
ata-imx31.c
|
Remove an unneeded #include and a lone "#" on a line (it's early).
|
2008-05-08 08:09:24 +00:00 |
|
ata-target.h
|
Bring Gigabeat S bootloader one step close to a release version.
|
2008-05-10 18:00:11 +00:00 |
|
avic-imx31.c
|
IMX31: Try to catch the interrupt that was the reason irq_handler was called since it never should be. The bootloader occasionally shows one but it's not saying what.
|
2008-04-27 22:01:25 +00:00 |
|
avic-imx31.h
|
IMX31: Use template structures to access modules' registers from a base address (as for i2c) which makes drivers look nicer and makes array accesses of registers simpler. Throw in minor fix to fiq_handler dispatcher, otherwise no functional changes.
|
2008-04-27 21:32:10 +00:00 |
|
backlight-imx31.c
|
Bring Gigabeat S bootloader one step close to a release version.
|
2008-05-10 18:00:11 +00:00 |
|
backlight-target.h
|
Bring Gigabeat S bootloader one step close to a release version.
|
2008-05-10 18:00:11 +00:00 |
|
button-imx31.c
|
Bring Gigabeat S bootloader one step close to a release version.
|
2008-05-10 18:00:11 +00:00 |
|
button-target.h
|
Bring Gigabeat S bootloader one step close to a release version.
|
2008-05-10 18:00:11 +00:00 |
|
clkctl-imx31.c
|
Gigabeat S: Use the fastest PIO mode the installed drive allows instead of always PIO0. Centralize clock information in clkctl-imx31.c.
|
2008-05-05 10:53:06 +00:00 |
|
clkctl-imx31.h
|
Gigabeat S: Use the fastest PIO mode the installed drive allows instead of always PIO0. Centralize clock information in clkctl-imx31.c.
|
2008-05-05 10:53:06 +00:00 |
|
dma_start.c
|
|
|
|
gpio-gigabeat-s.c
|
Add GPIO manager. Get the PMIC interrupt handling working (along with power button and HP detect). Add some reg field defined instead of using raw numbers. Add PMIC info to debug ports screen. Refine PMIC driver ops a little bit.
|
2008-04-12 16:56:45 +00:00 |
|
gpio-imx31.c
|
IMX31: Use template structures to access modules' registers from a base address (as for i2c) which makes drivers look nicer and makes array accesses of registers simpler. Throw in minor fix to fiq_handler dispatcher, otherwise no functional changes.
|
2008-04-27 21:32:10 +00:00 |
|
gpio-imx31.h
|
IMX31: Use template structures to access modules' registers from a base address (as for i2c) which makes drivers look nicer and makes array accesses of registers simpler. Throw in minor fix to fiq_handler dispatcher, otherwise no functional changes.
|
2008-04-27 21:32:10 +00:00 |
|
gpio-target.h
|
Add GPIO manager. Get the PMIC interrupt handling working (along with power button and HP detect). Add some reg field defined instead of using raw numbers. Add PMIC info to debug ports screen. Refine PMIC driver ops a little bit.
|
2008-04-12 16:56:45 +00:00 |
|
i2c-imx31.c
|
Gigabeat S: Implement i2c driver - transmit works but no testing of receiving which will get a chance later. Add some seeds for codec driver. Correct a few #defines.
|
2008-04-27 10:30:54 +00:00 |
|
i2c-imx31.h
|
Gigabeat S: Implement i2c driver - transmit works but no testing of receiving which will get a chance later. Add some seeds for codec driver. Correct a few #defines.
|
2008-04-27 10:30:54 +00:00 |
|
i2s-imx31.c
|
|
|
|
kernel-imx31.c
|
Serial driver for imx31. Perhaps not 100% but maybe 80-90% (future developments will tell). Factor-out the mc13783 stuff and make that driver a layer above the SPI. TODO: start processing PMIC interrupts. Start a clkctl API for imx31 (we'll see if this sticks around but it seems reasonable here). Misc. stuff for convenience/neatness.
|
2008-04-11 08:51:27 +00:00 |
|
lcd-imx31.c
|
Add two missing rockbox headers and set svn:eol-style
|
2008-05-08 16:47:24 +00:00 |
|
lcd-target.h
|
|
|
|
mc13783-imx31.c
|
Bring Gigabeat S bootloader one step close to a release version.
|
2008-05-10 18:00:11 +00:00 |
|
mmu-imx31.c
|
Gigabeat S mixer: Make some progress. Get the tick and core sleep working using the AVIC. Redo the startup code to remap from IRAM and not include the lcd driver frambuffer in the remapping (until it can be moved). Clean up LCD driver. For other misc. changes, see the diffs. Now it progresses to ATA init and fails with -11 but without crashing or hanging. Replace all bootloaders.
|
2008-02-05 04:43:19 +00:00 |
|
mmu-imx31.h
|
Gigabeat S now uses the shared ARM MMU code rather than the (mostly duplicated) private code. No functional change.
|
2007-12-23 03:47:28 +00:00 |
|
pcm-imx31.c
|
Gigabeat S: Man it's so loud in here. We have SOUND! Someone please make keymaps consistent; it's rather messy atm.
|
2008-05-03 15:14:52 +00:00 |
|
power-imx31.c
|
Hehe. Should probably implement ide_powered if implementing ide_power_enable.
|
2008-05-08 14:11:26 +00:00 |
|
power-imx31.h
|
Charger detection for Gigabeat S
|
2008-04-13 10:04:21 +00:00 |
|
powermgmt-imx31.c
|
Gigabeat S: Make ADC battery voltage reading correct. Tiny tweak to ADC driver traffic limiting.
|
2008-04-14 06:52:38 +00:00 |
|
serial-imx31.h
|
Bring the IMX31 serial driver in line with the CONTRIBUTING guidelines.
|
2008-02-19 14:15:59 +00:00 |
|
spi-imx31.c
|
IMX31: Use template structures to access modules' registers from a base address (as for i2c) which makes drivers look nicer and makes array accesses of registers simpler. Throw in minor fix to fiq_handler dispatcher, otherwise no functional changes.
|
2008-04-27 21:32:10 +00:00 |
|
spi-imx31.h
|
IMX31: Use template structures to access modules' registers from a base address (as for i2c) which makes drivers look nicer and makes array accesses of registers simpler. Throw in minor fix to fiq_handler dispatcher, otherwise no functional changes.
|
2008-04-27 21:32:10 +00:00 |
|
system-imx31.c
|
Bring Gigabeat S bootloader one step close to a release version.
|
2008-05-10 18:00:11 +00:00 |
|
system-target.h
|
Gigabeat S: Man it's so loud in here. We have SOUND! Someone please make keymaps consistent; it's rather messy atm.
|
2008-05-03 15:14:52 +00:00 |
|
usb-imx31.c
|
Gigabeat S: Put in (so it appears) proper delays for USB PHY reset. Use the atomic regmod functions to change bits.
|
2008-05-08 09:03:19 +00:00 |
|
usb-target.h
|
Bring Gigabeat S bootloader one step close to a release version.
|
2008-05-10 18:00:11 +00:00 |
|
wmcodec-imx31.c
|
Gigabeat S: Add ATA/IDE power management. Fix parameter order of regmod32 as it was intended (had some things mixed up :P).
|
2008-05-08 08:03:08 +00:00 |
80278e45aa