rockbox/firmware/target/arm/rk27xx/spfd5420a.h
Marcin Bukat 976a1699da Rockchip rk27xx port initial commit. This is still work in progress.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29935 a1c6a512-1295-4272-9138-f99709370657
2011-05-30 21:10:37 +00:00

107 lines
4.1 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2011 Marcin Bukat
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#define ID_READ 0x000
#define DRIVER_OUT_CTRL 0x001
#define WAVEFORM_CTRL 0x002
#define ENTRY_MODE 0x003
/* 0x004 - 0x005 reserved */
#define SHAPENING_CTRL 0x006 /* not present in datasheet */
#define DISPLAY_CTRL1 0x007
#define DISPLAY_CTRL2 0x008
#define LOW_PWR_CTRL1 0x009
/* 0x00A reserved */
#define LOW_PWR_CTRL2 0x00B
#define EXT_DISP_CTRL1 0x00C
/* 0x00D - 0x00E reserved */
#define EXT_DISP_CTRL2 0x00F
#define PANEL_IF_CTRL1 0x010
#define PANEL_IF_CTRL2 0x011
#define PANEL_IF_CTRL3 0x012
/* 0x013 - 0x01F reserved */
#define PANEL_IF_CTRL4 0x020
#define PANEL_IF_CTRL5 0x021
#define PANEL_IF_CTRL6 0x022
/* 0x023 - 0x08F reserved */
#define FRAME_MKR_CTRL 0x090
/* 0x091 reserved */
#define MDDI_CTRL 0x092 /* not present in datasheet */
/* 0x093 - 0x0FF reserved */
#define PWR_CTRL1 0x100
#define PWR_CTRL2 0x101
#define PWR_CTRL3 0x102
#define PWR_CTRL4 0x103 /* amplitude to VCOM */
/* 0x104 - 0x106 reserved */
#define PWR_CTRL5 0x107
/* 0x108 - 0x10F reserved */
#define PWR_CTRL6 0x110
#define PWR_CTRL7 0x112 /* not present in datasheet */
/* 0x113 - 0x1FF reserved */
#define GRAM_H_ADDR 0x200
#define GRAM_V_ADDR 0x201
#define GRAM_READ 0x202
#define GRAM_WRITE 0x202
/* 0x203 - 0x20F reserved */
#define WINDOW_H_START 0x210
#define WINDOW_H_END 0x211
#define WINDOW_V_START 0x212
#define WINDOW_V_END 0x213
/* 0x214 - 0x27F reserved */
#define NVM_READ 0x280
#define NVM_WRITE 0x280
#define VCOM_HV1 0x281
#define VCOM_HV2 0x282
/* 0x283 - 0x2FF reserved */
#define GAMMA_CTRL1 0x300
#define GAMMA_CTRL2 0x301
#define GAMMA_CTRL3 0x302
#define GAMMA_CTRL4 0x303
#define GAMMA_CTRL5 0x304
#define GAMMA_CTRL6 0x305
#define GAMMA_CTRL7 0x306
#define GAMMA_CTRL8 0x307
#define GAMMA_CTRL9 0x308
#define GAMMA_CTRL10 0x309
#define GAMMA_CTRL11 0x30A
#define GAMMA_CTRL12 0x30B
#define GAMMA_CTRL13 0x30C
#define GAMMA_CTRL14 0x30D
#define GAMMA_CTRL15 0x30E
#define GAMMA_CTRL16 0x30F
/* 0x310 - 0x3FF reserved */
#define BASE_IMG_SIZE 0x400
#define BASE_IMG_CTRL 0x401
/* 0x402 - 0x403 reserved */
#define VSCROLL_CTRL 0x404
/* 0x405 - 0x4FF reserved */
#define PART1_POS 0x500
#define PART1_START 0x501
#define PART1_END 0x502
#define PART2_POS 0x503
#define PART2_START 0x504
#define PART2_END 0x505
/* 0x506 - 0x5FF reserved */
#define RESET 0x600 /* not present in datasheet */
/* 0x601 - 0x605 */
#define IF_ENDIAN 0x606
/* 0x607 - 0x6EF reserved */
#define NVM_CTRL 0x6F0
/* 0x6F1 - 0xFFF reserved */