89ba7e818c
_remote_backlight_* and _buttonlight_* are cleaned as well Change-Id: I73653752831bbe170c26ba95d3bc04c2e3a5cf30
131 lines
3.6 KiB
C
131 lines
3.6 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2002 by Linus Nielsen Feltzing
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "config.h"
|
|
#include <stdlib.h>
|
|
#include "cpu.h"
|
|
#include "kernel.h"
|
|
#include "thread.h"
|
|
#include "i2c.h"
|
|
#include "debug.h"
|
|
#include "rtc.h"
|
|
#include "usb.h"
|
|
#include "power.h"
|
|
#include "system.h"
|
|
#include "button.h"
|
|
#include "timer.h"
|
|
#include "backlight.h"
|
|
#include "backlight-target.h"
|
|
|
|
static int brightness = 1; /* 1 to 32 */
|
|
static int current_dim = 16; /* default after enabling the backlight dimmer */
|
|
static bool enabled = false;
|
|
|
|
void backlight_hw_brightness(int val)
|
|
{
|
|
int oldlevel;
|
|
|
|
if (current_dim < val)
|
|
{
|
|
do
|
|
{
|
|
oldlevel = disable_irq_save();
|
|
GPIO_CLEAR_BITWISE(GPIOD_OUTPUT_VAL, 0x80);
|
|
udelay(10);
|
|
GPIO_SET_BITWISE(GPIOD_OUTPUT_VAL, 0x80);
|
|
restore_irq(oldlevel);
|
|
udelay(10);
|
|
}
|
|
while (++current_dim < val);
|
|
}
|
|
else if (current_dim > val)
|
|
{
|
|
do
|
|
{
|
|
oldlevel = disable_irq_save();
|
|
GPIO_CLEAR_BITWISE(GPIOD_OUTPUT_VAL, 0x80);
|
|
udelay(200);
|
|
GPIO_SET_BITWISE(GPIOD_OUTPUT_VAL, 0x80);
|
|
restore_irq(oldlevel);
|
|
udelay(10);
|
|
}
|
|
while (--current_dim > val);
|
|
}
|
|
brightness = val;
|
|
}
|
|
|
|
void _backlight_hw_enable(bool on)
|
|
{
|
|
#ifdef HAVE_LCD_SLEEP
|
|
if (on)
|
|
/* If the fade-out is interrupted, enabled will be true, but
|
|
lcd_awake() needs to be called anyways because the LCD
|
|
may be sleeping.
|
|
*/
|
|
lcd_awake();
|
|
#endif
|
|
|
|
if (on == enabled)
|
|
return;
|
|
|
|
if (on)
|
|
{
|
|
GPIO_SET_BITWISE(GPIOB_OUTPUT_VAL, 0x08);
|
|
GPIO_SET_BITWISE(GPIOD_OUTPUT_VAL, 0x80);
|
|
sleep(HZ/100);
|
|
current_dim = 16;
|
|
backlight_hw_brightness(brightness);
|
|
}
|
|
else
|
|
{
|
|
GPIO_CLEAR_BITWISE(GPIOD_OUTPUT_VAL, 0x80);
|
|
GPIO_CLEAR_BITWISE(GPIOB_OUTPUT_VAL, 0x08);
|
|
sleep(HZ/20);
|
|
}
|
|
enabled = on;
|
|
}
|
|
|
|
/* Switch the backlight on. Works only if the backlight circuit is enabled.
|
|
* Called in ISR context for fading, so it must be fast. */
|
|
void _backlight_led_on(void)
|
|
{
|
|
GPIO_SET_BITWISE(GPIOL_OUTPUT_VAL, 0x80);
|
|
}
|
|
|
|
/* Switch the backlight off. Keeps the backlight circuit enabled.
|
|
* Called in ISR context for fading, so it must be fast. */
|
|
void _backlight_led_off(void)
|
|
{
|
|
GPIO_CLEAR_BITWISE(GPIOL_OUTPUT_VAL, 0x80);
|
|
}
|
|
|
|
bool backlight_hw_init(void)
|
|
{
|
|
GPIO_SET_BITWISE(GPIOB_ENABLE, 0x08);
|
|
GPIO_SET_BITWISE(GPIOB_OUTPUT_EN, 0x08);
|
|
GPIO_SET_BITWISE(GPIOD_ENABLE, 0x80);
|
|
GPIO_SET_BITWISE(GPIOD_OUTPUT_EN, 0x80);
|
|
_backlight_hw_enable(true);
|
|
GPIO_SET_BITWISE(GPIOL_ENABLE, 0x80);
|
|
GPIO_SET_BITWISE(GPIOL_OUTPUT_EN, 0x80);
|
|
GPIO_SET_BITWISE(GPIOL_OUTPUT_VAL, 0x80);
|
|
|
|
return true;
|
|
}
|