a1a332e04b
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20299 a1c6a512-1295-4272-9138-f99709370657
228 lines
9.2 KiB
C
228 lines
9.2 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2009 by Michael Sevakis
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#ifndef SDMA_IMX31_H
|
|
#define SDMA_IMX31_H
|
|
|
|
/* Much of the code in here is based upon the Linux BSP provided by Freescale
|
|
* Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved. */
|
|
|
|
/* Peripheral and transfer type - used to select the proper SDMA channel
|
|
* script to execute. */
|
|
enum SDMA_PERIPHERAL_TYPE
|
|
{
|
|
/* SHP = "Shared peripheral" where peripheral is mapped into SDMA
|
|
* core memory via the SPBA */
|
|
__SDMA_PER_FIRST = -1,
|
|
SDMA_PER_MEMORY,
|
|
SDMA_PER_DSP,
|
|
SDMA_PER_FIRI,
|
|
SDMA_PER_UART,
|
|
SDMA_PER_UART_SHP,
|
|
SDMA_PER_ATA,
|
|
SDMA_PER_CSPI,
|
|
SDMA_PER_EXT,
|
|
SDMA_PER_SSI,
|
|
SDMA_PER_SSI_SHP,
|
|
SDMA_PER_MMC,
|
|
SDMA_PER_SDHC,
|
|
SDMA_PER_CSPI_SHP,
|
|
SDMA_PER_MSHC,
|
|
SDMA_PER_MSHC_SHP,
|
|
SDMA_PER_CCM,
|
|
SDMA_PER_ASRC,
|
|
SDMA_PER_ESAI,
|
|
SDMA_PER_SIM,
|
|
SDMA_PER_SPDIF,
|
|
SDMA_PER_IPU_MEMORY,
|
|
};
|
|
|
|
enum SDMA_TRANSFER_TYPE
|
|
{
|
|
__SDMA_TRAN_FIRST = -1,
|
|
SDMA_TRAN_INT_2_INT,
|
|
SDMA_TRAN_EMI_2_INT,
|
|
SDMA_TRAN_EMI_2_EMI,
|
|
SDMA_TRAN_INT_2_EMI,
|
|
|
|
SDMA_TRAN_INT_2_DSP,
|
|
SDMA_TRAN_DSP_2_INT,
|
|
SDMA_TRAN_DSP_2_DSP,
|
|
SDMA_TRAN_DSP_2_PER,
|
|
SDMA_TRAN_PER_2_DSP,
|
|
SDMA_TRAN_EMI_2_DSP,
|
|
SDMA_TRAN_DSP_2_EMI,
|
|
SDMA_TRAN_DSP_2_EMI_LOOP,
|
|
SDMA_TRAN_EMI_2_DSP_LOOP,
|
|
|
|
SDMA_TRAN_PER_2_INT,
|
|
SDMA_TRAN_PER_2_EMI,
|
|
SDMA_TRAN_INT_2_PER,
|
|
SDMA_TRAN_EMI_2_PER,
|
|
};
|
|
|
|
/* 2.3 - Smart Direct Memory Access (SDMA) Events, Table 2-5 */
|
|
/* These are indexes into the SDMA_CHNENBL register array (each a bitmask
|
|
* determining which channels are triggered by requests). */
|
|
enum SDMA_REQUEST_TYPE
|
|
{
|
|
SDMA_REQ_EXT0 = 0, /* Extern DMA request from MCU1_0 */
|
|
SDMA_REQ_CCM = 1, /* DVFS/DPTC event (ccm_dvfs_sdma_int) */
|
|
SDMA_REQ_ATA_TXFER_END = 2, /* ata_txfer_end_alarm (event_id1) */
|
|
SDMA_REQ_ATA_TX = 3, /* ata_tx_fifo_alarm (event_id2) */
|
|
SDMA_REQ_ATA_RX = 4, /* ata_rcv_fifo_alarm (event_id2) */
|
|
SDMA_REQ_SIM = 5, /* */
|
|
SDMA_REQ_CSPI2_RX = 6, /* DMA Rx request */
|
|
SDMA_REQ_CSPI2_TX = 7, /* DMA Tx request */
|
|
SDMA_REQ_CSPI1_RX = 8, /* DMA Rx request of CSPI */
|
|
SDMA_REQ_UART3_RX = 8, /* DMA Rx request RxFIFO of UART3 */
|
|
SDMA_REQ_CSPI1_TX = 9, /* DMA Tx request of CSPI */
|
|
SDMA_REQ_UART3_TX = 9, /* DMA Tx request TxFIFO of UART3 */
|
|
SDMA_REQ_CSPI3_RX = 10, /* RxFIFO or CSPI3 Rx request */
|
|
SDMA_REQ_UART5_RX = 10, /* RxFIFO or CSPI3 Rx request */
|
|
SDMA_REQ_CSPI3_TX = 11, /* TxFIFO or CSPI3 Tx request */
|
|
SDMA_REQ_UART5_TX = 11, /* TxFIFO or CSPI3 Tx request */
|
|
SDMA_REQ_UART4_RX = 12, /* RxFIFO */
|
|
SDMA_REQ_UART4_TX = 13, /* TxFIFO */
|
|
SDMA_REQ_EXT2 = 14, /* External DMA request from MCU1_2 or from
|
|
MBX (Graphic accelerator) */
|
|
SDMA_REQ_EXT1 = 15, /* External request from MCU1_1 */
|
|
SDMA_REQ_FIRI_RX = 16, /* DMA request of FIR's receiver FIFO
|
|
controlled by the pgp_firi signal
|
|
from the IOMUXC PGP register */
|
|
SDMA_REQ_UART2_RX = 16, /* RxFIFO of UART2 */
|
|
SDMA_REQ_FIRI_TX = 17, /* DMA request of FIR's transmitter
|
|
FIFO controled by the pgp_firi signal
|
|
the IOMUXC PGP register */
|
|
SDMA_REQ_UART2_TX = 17, /* TxFIFO of UART2 */
|
|
SDMA_REQ_UART1_RX = 18, /* RxFIFO */
|
|
SDMA_REQ_UART1_TX = 19, /* TxFIFO */
|
|
SDMA_REQ_MMC1 = 20, /* MMC DMA request */
|
|
SDMA_REQ_SDHC1 = 20, /* SDHC1 DMA request */
|
|
SDMA_REQ_MSHC1 = 20, /* MSHC1 DMA request */
|
|
SDMA_REQ_MMC2 = 21, /* MMC DMA request */
|
|
SDMA_REQ_SDHC2 = 21, /* SDHC2 DMA request */
|
|
SDMA_REQ_MSHC2 = 21, /* MSHC2 DMA request */
|
|
SDMA_REQ_SSI2_RX2 = 22, /* SSI #2 receive 2 DMA request (SRX1_2) */
|
|
SDMA_REQ_SSI2_TX2 = 23, /* SSI #2 transmit 2 DMA request (STX1_2) */
|
|
SDMA_REQ_SSI2_RX1 = 24, /* SSI #2 receive 1 DMA request (SRX0_2) */
|
|
SDMA_REQ_SSI2_TX1 = 25, /* SSI #2 transmit 1 DMA request (STX0_2) */
|
|
SDMA_REQ_SSI1_RX2 = 26, /* SSI #1 receive 2 DMA request (SRX1_1) */
|
|
SDMA_REQ_SSI1_TX2 = 27, /* SSI #1 transmit 2 DMA request (STX1_1) */
|
|
SDMA_REQ_SSI1_RX1 = 28, /* SSI #1 receive 1 DMA request (SRX1_0) */
|
|
SDMA_REQ_SSI1_TX1 = 29, /* SSI #1 transmit 1 DMA request (STX1_0) */
|
|
SDMA_REQ_NFC = 30, /* NAND-flash controller */
|
|
SDMA_REQ_IPU = 31, /* IPU source (defaults to IPU at reset) */
|
|
SDMA_REQ_ECT = 31, /* ECT source */
|
|
};
|
|
|
|
/* Addresses for peripheral DMA transfers */
|
|
enum SDMA_PER_ADDR
|
|
{
|
|
SDMA_PER_ADDR_SDRAM = SDRAM_BASE_ADDR, /* memory */
|
|
SDMA_PER_ADDR_CCM = CCM_BASE_ADDR+0x00, /* CCMR */
|
|
/* ATA */
|
|
SDMA_PER_ADDR_ATA_TX = ATA_DMA_BASE_ADDR+0x18,
|
|
SDMA_PER_ADDR_ATA_RX = ATA_DMA_BASE_ADDR,
|
|
#if 0
|
|
SDMA_PER_ADDR_ATA_TX16 =
|
|
SDMA_PER_ADDR_ATA_RX16 =
|
|
#endif
|
|
#if 0
|
|
SDMA_PER_ADDR_SIM =
|
|
#endif
|
|
/* CSPI2 */
|
|
SDMA_PER_ADDR_CSPI2_RX = CSPI2_BASE_ADDR+0x00, /* RXDATA2 */
|
|
SDMA_PER_ADDR_CSPI2_TX = CSPI2_BASE_ADDR+0x04, /* TXDATA2 */
|
|
/* CSPI1 */
|
|
SDMA_PER_ADDR_CSPI1_RX = CSPI1_BASE_ADDR+0x00, /* RXDATA1 */
|
|
SDMA_PER_ADDR_CSPI1_TX = CSPI1_BASE_ADDR+0x04, /* TXDATA1 */
|
|
/* UART3 */
|
|
SDMA_PER_ADDR_UART3_RX = UART3_BASE_ADDR+0x00, /* URXD3 */
|
|
SDMA_PER_ADDR_UART3_TX = UART3_BASE_ADDR+0x40, /* UTXD3 */
|
|
/* CSPI3 */
|
|
SDMA_PER_ADDR_CSPI3_RX = CSPI3_BASE_ADDR+0x00, /* RXDATA3 */
|
|
SDMA_PER_ADDR_CSPI3_TX = CSPI3_BASE_ADDR+0x04, /* TXDATA3 */
|
|
/* UART5 */
|
|
SDMA_PER_ADDR_UART5_RX = UART5_BASE_ADDR+0x00, /* URXD5 */
|
|
SDMA_PER_ADDR_UART5_TX = UART5_BASE_ADDR+0x40, /* UTXD5 */
|
|
/* UART4 */
|
|
SDMA_PER_ADDR_UART4_RX = UART4_BASE_ADDR+0x00, /* URXD4 */
|
|
SDMA_PER_ADDR_UART4_TX = UART4_BASE_ADDR+0x40, /* UTXD4 */
|
|
/* FIRI */
|
|
SDMA_PER_ADDR_FIRI_RX = FIRI_BASE_ADDR+0x18, /* Receiver FIFO */
|
|
SDMA_PER_ADDR_FIRI_TX = FIRI_BASE_ADDR+0x14, /* Transmitter FIFO */
|
|
/* UART2 */
|
|
SDMA_PER_ADDR_UART2_RX = UART2_BASE_ADDR+0x00, /* URXD2 */
|
|
SDMA_PER_ADDR_UART2_TX = UART2_BASE_ADDR+0x40, /* UTXD2 */
|
|
/* UART1 */
|
|
SDMA_PER_ADDR_UART1_RX = UART1_BASE_ADDR+0x00, /* URXD1 */
|
|
SDMA_PER_ADDR_UART1_TX = UART1_BASE_ADDR+0x40, /* UTXD1 */
|
|
SDMA_PER_ADDR_MMC_SDHC1 = MMC_SDHC1_BASE_ADDR+0x38, /* BUFFER_ACCESS */
|
|
SDMA_PER_ADDR_MMC_SDHC2 = MMC_SDHC2_BASE_ADDR+0x38, /* BUFFER_ACCESS */
|
|
#if 0
|
|
SDMA_PER_ADDR_MSHC1 =
|
|
SDMA_PER_ADDR_MSHC2 =
|
|
#endif
|
|
/* SSI2 */
|
|
SDMA_PER_ADDR_SSI2_RX2 = SSI2_BASE_ADDR+0x0C, /* SRX1_2 */
|
|
SDMA_PER_ADDR_SSI2_TX2 = SSI2_BASE_ADDR+0x04, /* STX1_2 */
|
|
SDMA_PER_ADDR_SSI2_RX1 = SSI2_BASE_ADDR+0x08, /* SRX0_2 */
|
|
SDMA_PER_ADDR_SSI2_TX1 = SSI2_BASE_ADDR+0x00, /* STX0_2 */
|
|
/* SSI1 */
|
|
SDMA_PER_ADDR_SSI1_RX2 = SSI1_BASE_ADDR+0x0C, /* SRX1_1 */
|
|
SDMA_PER_ADDR_SSI1_TX2 = SSI1_BASE_ADDR+0x04, /* STX1_1 */
|
|
SDMA_PER_ADDR_SSI1_RX1 = SSI1_BASE_ADDR+0x08, /* SRX0_1 */
|
|
SDMA_PER_ADDR_SSI1_TX1 = SSI1_BASE_ADDR+0x00, /* STX0_1 */
|
|
#if 0
|
|
SDMA_PER_ADDR_NFC =
|
|
SDMA_PER_ADDR_IPU =
|
|
SDMA_PER_ADDR_ECT =
|
|
#endif
|
|
};
|
|
|
|
/* DMA driver defines */
|
|
#define SDMA_SDHC_MMC_WML 16
|
|
#define SDMA_SDHC_SD_WML 64
|
|
#define SDMA_SSI_TXFIFO_WML 4 /* Four samples written per channel activation */
|
|
#define SDMA_SSI_RXFIFO_WML 6 /* Six samples read per channel activation */
|
|
#define SDMA_FIRI_WML 16
|
|
|
|
#define SDMA_ATA_WML 32 /* DMA watermark level in bytes */
|
|
#define SDMA_ATA_BD_NR (512/3/4) /* Number of BDs per channel */
|
|
|
|
#include "sdma_struct.h"
|
|
|
|
void sdma_init(void);
|
|
void sdma_read_words(unsigned long *buf, unsigned long start, int count);
|
|
void sdma_write_words(const unsigned long *buf, unsigned long start, int count);
|
|
void sdma_channel_set_priority(unsigned int channel, unsigned int priority);
|
|
bool sdma_channel_reset(unsigned int channel);
|
|
void sdma_channel_run(unsigned int channel);
|
|
void sdma_channel_pause(unsigned int channel);
|
|
void sdma_channel_stop(unsigned int channel);
|
|
void sdma_channel_wait_nonblocking(unsigned int channel);
|
|
bool sdma_channel_init(unsigned int channel,
|
|
struct channel_descriptor *cd_p,
|
|
struct buffer_descriptor *base_bd_p);
|
|
void sdma_channel_close(unsigned int channel);
|
|
bool sdma_channel_is_error(unsigned int channel);
|
|
|
|
#endif /* SDMA_IMX31_H */
|