rockbox/firmware/drivers/pcf50635.c
Michael Giacomelli 3ba0e05ab5 Commit FS#12352 by Stanislav Chizhik. Add support for the PCF50635. Enables detection of USB power sources.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30992 a1c6a512-1295-4272-9138-f99709370657
2011-11-15 20:37:47 +00:00

160 lines
5.1 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2009 by Rob Purchase
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "pcf50635.h"
#include "i2c.h"
#include "system.h"
#define PCF50635_ADDR 0xe6
int pcf50635_write(int address, unsigned char val)
{
unsigned char data[] = { address, val };
return i2c_write(PCF50635_ADDR, data, 2);
}
int pcf50635_write_multiple(int address, const unsigned char* buf, int count)
{
int i;
for (i = 0; i < count; i++)
pcf50635_write(address + i, buf[i]);
return 0;
}
int pcf50635_read(int address)
{
unsigned char val = -1;
i2c_readmem(PCF50635_ADDR, address, &val, 1);
return val;
}
int pcf50635_read_multiple(int address, unsigned char* buf, int count)
{
return i2c_readmem(PCF50635_ADDR, address, buf, count);
}
void pcf50635_init(void)
{
#ifdef COWON_D2
static const char init_data[] =
{
/* DOWN1: 1.2V, max DVM step, enabled */
PCF5063X_REG_DOWN1OUT, 0x13,
PCF5063X_REG_DOWN1CTL, 0x1e,
PCF5063X_REG_DOWN1ENA, 0x1,
/* DOWN2: 1.8V, max DVM step, enabled */
PCF5063X_REG_DOWN2OUT, 0x2f,
PCF5063X_REG_DOWN2CTL, 0x1e,
PCF5063X_REG_DOWN2ENA, 0x1,
/* AUTO: 3.0V, enabled */
PCF5063X_REG_AUTOOUT, 0x5f,
PCF5063X_REG_AUTOENA, 0x1,
/* LDO1: 3.3V, enabled */
PCF5063X_REG_LDO1OUT, 0x18,
PCF5063X_REG_LDO1ENA, 0x1,
/* LDO2: 3.0V, enabled */
PCF5063X_REG_LDO2OUT, 0x15,
PCF5063X_REG_LDO2ENA, 0x1,
/* LDO4: 3.0V, enabled */
PCF5063X_REG_LDO4OUT, 0x15,
PCF5063X_REG_LDO4ENA, 0x1,
/* LDO5: 1.8V, enabled */
PCF5063X_REG_LDO5OUT, 0x9,
PCF5063X_REG_LDO5ENA, 0x1,
/* LDO6: 2.1V, enabled */
PCF5063X_REG_LDO6OUT, 0xc,
PCF5063X_REG_LDO6ENA, 0x1,
/* LDO3 and HCLDO disabled */
PCF5063X_REG_LDO3ENA, 0x0,
PCF5063X_REG_HCLDOENA, 0x0,
/* Disable GPIOs */
PCF5063X_REG_GPIOCTL, 0x0,
PCF5063X_REG_GPIO1CFG, 0x0,
PCF5063X_REG_GPIO2CFG, 0x0,
PCF5063X_REG_GPIO3CFG, 0x0,
/* IRQ masks (OF values in brackets) */
PCF5063X_REG_INT1M, 0xfa, /* (0x8a enable alarm, usbins, adpins) */
PCF5063X_REG_INT2M, 0xff, /* (0xff all masked) */
PCF5063X_REG_INT3M, 0x7f, /* (0x7f enable onkey1s) */
PCF5063X_REG_INT4M, 0xff, /* (0xfd enable lowbat) */
PCF5063X_REG_INT5M, 0xff, /* (0xff all masked) */
/* Wakeup mode */
PCF5063X_REG_OOCMODE, 0x0, /* onkey falling edge */
PCF5063X_REG_OOCCTL, 0x2, /* actphrst = phase 3 */
PCF5063X_REG_OOCWAKE, 0xc1, /* wakeup on adapter, usb, onkey */
/* Configure battery charger as per OF */
PCF5063X_REG_MBCC2, 0xa8, /* Vmax = 4.2V, Vbatcond = 2.7V, long debounce */
PCF5063X_REG_MBCC3, 0x2a, /* precharge level = 16% */
PCF5063X_REG_MBCC4, 0x94, /* fastcharge level = 58% */
PCF5063X_REG_MBCC5, 0xff, /* fastcharge level (usb) = 100% */
PCF5063X_REG_MBCC6, 0x4, /* cutoff level = 12.5% */
PCF5063X_REG_MBCC7, 0xc1, /* bat-sysImax = 2.2A, USB = 500mA */
PCF5063X_REG_BVMCTL, 0xe, /* batok level = 3.4V */
/* end marker */
0};
const char* ptr;
for (ptr = init_data; *ptr != 0; ptr += 2)
pcf50635_write(ptr[0], ptr[1]);
/* Enable automatic charging, preserving default values */
pcf50635_write(PCF5063X_REG_MBCC1,
pcf50635_read(PCF5063X_REG_MBCC1) | 7);
#endif
}
void pcf50635_read_adc(int adc, short* res1, short* res2)
{
int adcs1 = 0, adcs2 = 0, adcs3 = 0;
int level = disable_irq_save();
pcf50635_write(PCF5063X_REG_ADCC1, PCF5063X_ADCC1_ADCSTART | adc);
do {
adcs3 = pcf50635_read(PCF5063X_REG_ADCS3);
} while (!(adcs3 & PCF5063X_ADCS3_ADCRDY));
if (res1 != NULL) adcs1 = pcf50635_read(PCF5063X_REG_ADCS1);
if (res2 != NULL) adcs2 = pcf50635_read(PCF5063X_REG_ADCS2);
pcf50635_write(PCF5063X_REG_ADCC1, 0);
restore_interrupt(level);
if (res1 != NULL) *res1 = (adcs1 << 2) | (adcs3 & 3);
if (res2 != NULL) *res2 = (adcs2 << 2) | ((adcs3 & 0xC) >> 2);
}