Jens Arnold
|
feb5b15e9b
|
All-new greyscale library, replacing the old one. Features: (1) Drawing/updating is faster than the old grayscale lib at full depth. (2) Always 129 shades instead of 2..33 shades. (3) No graininess caused by frequent updates (mpegplayer, doom, ...). (4) Needs less memory than the old grayscale lib at full depth. * The tradeoff is slightly higher CPU load in the ISR (frames are calculated 'live') and an extra function in the core. * Ported all plugins which used the graylib to use the new one. * Some slight optimisations for archos and H1x0 LCD update.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15998 a1c6a512-1295-4272-9138-f99709370657
|
2008-01-04 23:42:38 +00:00 |
|
Jens Arnold
|
f4c5c6aa62
|
Fix bootloaders, and the backlight-modded Ondio build.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15600 a1c6a512-1295-4272-9138-f99709370657
|
2007-11-12 19:19:38 +00:00 |
|
Jens Arnold
|
ef12b3b5c6
|
Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15599 a1c6a512-1295-4272-9138-f99709370657
|
2007-11-12 18:49:53 +00:00 |
|
Barry Wardell
|
0d8111cb39
|
Split radio i2c drivers into target tree where they belong. No changes to binaries produced.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15558 a1c6a512-1295-4272-9138-f99709370657
|
2007-11-10 19:14:01 +00:00 |
|
Jens Arnold
|
b85b6be3aa
|
Coldfire targets: enable buffered writes by default. Speeds up all sorts of I/O that writes to ports: LCD update (except the functions using DMA on H300), ATA writes, .... Some timings had to be adjusted for the new configuration.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15129 a1c6a512-1295-4272-9138-f99709370657
|
2007-10-15 21:16:50 +00:00 |
|
Jens Arnold
|
99f9550881
|
H300, X5: Optimised lcd_yuv_blit(), using line-pair zig-zag writing to the LCD controller. ~7% speedup on H300, ~5% speedup on X5.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15111 a1c6a512-1295-4272-9138-f99709370657
|
2007-10-14 23:05:56 +00:00 |
|
Steve Bavin
|
c90c18ea67
|
Thanks to LinusN, fix Coldfire bootloaders not booting - FS#7533
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14949 a1c6a512-1295-4272-9138-f99709370657
|
2007-10-02 07:54:50 +00:00 |
|
Dave Chapman
|
1672350378
|
FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14600 a1c6a512-1295-4272-9138-f99709370657
|
2007-09-04 08:03:07 +00:00 |
|
Jens Arnold
|
0fac492c3d
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
|
2007-08-17 06:45:18 +00:00 |
|
Jens Arnold
|
8a177345ce
|
Moved archos power handling into target tree. * Tuner power handling cleaned up a bit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14345 a1c6a512-1295-4272-9138-f99709370657
|
2007-08-14 22:06:23 +00:00 |
|
Nils Wallménius
|
f28da1a35a
|
Enable a lot more features for simulators and add stubs where necessary, simulators should now work with identical lng and voice files as the respective target
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14299 a1c6a512-1295-4272-9138-f99709370657
|
2007-08-12 19:49:03 +00:00 |
|
Michael Sevakis
|
60b01fa0f7
|
Straignten out some issues with HAVE_LCD_ENABLE. 1g/2g/3g had it defined but it shouldn't have been. lcd_enabled() was only available as a real function on gigabeat but others can use that too. Markup lcd.h a bit because I got a bit lost in it.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14100 a1c6a512-1295-4272-9138-f99709370657
|
2007-07-31 12:43:06 +00:00 |
|
Michael Sevakis
|
58fc279d26
|
Scroll on main and remote with a single thread. Change the way system messages are defined before running out is an issue (which requires a full update of rockbox on the player).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14035 a1c6a512-1295-4272-9138-f99709370657
|
2007-07-28 08:12:05 +00:00 |
|
Jens Arnold
|
3deb27053a
|
Fix red bootloader builds. * Fix non-working PP5022 bootloaders. Also define correct IRAM size for PP5022/PP5024 bootloaders.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14015 a1c6a512-1295-4272-9138-f99709370657
|
2007-07-26 21:51:44 +00:00 |
|
Jens Arnold
|
f888509dad
|
Slight speedup for iAudio remote LCD update when the CPU isn't boosted.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13932 a1c6a512-1295-4272-9138-f99709370657
|
2007-07-19 21:24:47 +00:00 |
|
Michael Sevakis
|
7d759f6b9c
|
Do some planned radio interface cleanup since adding in the LV24020LP.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13880 a1c6a512-1295-4272-9138-f99709370657
|
2007-07-14 11:20:31 +00:00 |
|
Michael Sevakis
|
2d48d0ffa6
|
Straighten out some audio path APIs and misc. audio stuff. Having recording is not a prerequisite to having input/output source selection which is probably most useful when adding a audio input features like FM to a new port without forcing recording to be implemented first.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13599 a1c6a512-1295-4272-9138-f99709370657
|
2007-06-08 23:42:04 +00:00 |
|
Jens Arnold
|
c49d5dd631
|
Coldfire targets: Adjusted PLL settings (lowest possible VCO clock for each setting) and IDE timing (especially it's faster now on M5+X5). * Added/updated table showing the necessary settings (PLL, refresh, waitstates, IDE timing) for each possible clock frequency.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13230 a1c6a512-1295-4272-9138-f99709370657
|
2007-04-21 09:29:01 +00:00 |
|
Jens Arnold
|
47bf6c5a5a
|
Moved archos backlight code to target tree. Changed old mutlivalue CONFIG_BACKLIGHT to a simple HAVE_BACKLIGHT.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13136 a1c6a512-1295-4272-9138-f99709370657
|
2007-04-12 22:12:13 +00:00 |
|
Jens Arnold
|
fad79dc636
|
Moved archos USB handling to target tree. Minor simplification for coldfire (only one usb-target.h).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13110 a1c6a512-1295-4272-9138-f99709370657
|
2007-04-11 20:44:32 +00:00 |
|
Michael Sevakis
|
3354531614
|
More logf fixes. speex.c wants to format 64bit args so I didn't change that one nor add any formatting for that.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12858 a1c6a512-1295-4272-9138-f99709370657
|
2007-03-20 13:53:23 +00:00 |
|
Jens Arnold
|
39e1b59c48
|
Fixed backlight voltage for M5. Now the backlight is as bright as in the original firmware.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12787 a1c6a512-1295-4272-9138-f99709370657
|
2007-03-15 19:08:24 +00:00 |
|
Michael Sevakis
|
e21d217205
|
Squeeze the serial number code down a few more bytes and call it a day. Will try to reduce by a significant amount later.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12726 a1c6a512-1295-4272-9138-f99709370657
|
2007-03-11 16:01:01 +00:00 |
|
Michael Sevakis
|
94c4724420
|
Fix a late error that only let it read at default CPU frequency. Disable interrupts during ds2411 read since it's timing sensitive.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12724 a1c6a512-1295-4272-9138-f99709370657
|
2007-03-11 14:33:16 +00:00 |
|
Michael Sevakis
|
89a38d4273
|
iAudio X5: Enable reading of DS2411 serial number. See it under System|Debug|View HW info.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12723 a1c6a512-1295-4272-9138-f99709370657
|
2007-03-11 13:59:31 +00:00 |
|
Michael Sevakis
|
633f388002
|
Coldfire targets: Shuffle IRQ levels around to have all interaction between low level audio function calls and DMA be atomic. Make recording and playback independently startable and stoppable so one can be running and not interfere with the other. All tests I can do at the moment check out ok (play, record, play+record, FM radio on iRivers, S/PDIF on H120 (w/running optical on/off), and on-the-fly samplerate changes). Recording tested for well over an hour run and no problems.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12658 a1c6a512-1295-4272-9138-f99709370657
|
2007-03-07 06:23:02 +00:00 |
|
Jens Arnold
|
611737bde8
|
Add extra filtering to the X5 and M5 button drivers to prevent erratic button events (ported from H300).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12627 a1c6a512-1295-4272-9138-f99709370657
|
2007-03-05 20:14:41 +00:00 |
|
Michael Sevakis
|
8867d00141
|
More catching up on old work. Refine audio interface setup on Coldfire. Stop the funky glitching on the iAudio stuff when starting recording esp. at 88.2kHz. (probably due to the bidi interface). iRivers don't seem to care what you do. TLV320 still seems to have a little trouble selecting it's filters correctly for 88.2kHz or it could be some odd phasing effect. Get rid of the horrible reset parameter in pcm_apply_settings as it can decide for itself.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12618 a1c6a512-1295-4272-9138-f99709370657
|
2007-03-05 08:14:27 +00:00 |
|
Jens Arnold
|
1d232401fd
|
Forget to commit this one deleted file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12611 a1c6a512-1295-4272-9138-f99709370657
|
2007-03-05 00:13:46 +00:00 |
|
Jens Arnold
|
8876018d25
|
Bring up the M5 port to a working stage: Extended numerous explicit checks for IAUDIO_X5 to also check for IAUDIO_M5, moved code around the target tree, added preliminary background for the sim.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12610 a1c6a512-1295-4272-9138-f99709370657
|
2007-03-05 00:04:00 +00:00 |
|
Jens Arnold
|
7d718a8064
|
X5: Move the remote tick to target tree.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12486 a1c6a512-1295-4272-9138-f99709370657
|
2007-02-25 22:36:04 +00:00 |
|
Jens Arnold
|
51223e5395
|
Introduced LCD_FBHEIGHT in addition to the already existing LCD_FBWIDTH to ease framebuffer handling a bit. Added equivalent definitions for the remote LCD.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12419 a1c6a512-1295-4272-9138-f99709370657
|
2007-02-20 19:31:34 +00:00 |
|
Miika Pekkarinen
|
73cd9f3b63
|
Turn backlight ON at boot unless bootloader has already done that.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11992 a1c6a512-1295-4272-9138-f99709370657
|
2007-01-12 20:26:23 +00:00 |
|
Linus Nielsen Feltzing
|
e2022a26d0
|
Removed executable flag
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11967 a1c6a512-1295-4272-9138-f99709370657
|
2007-01-09 23:29:07 +00:00 |
|
Michael Sevakis
|
36c940555c
|
SWCODEC recording: More cleanup of stuff after queue additions and audio driver unification.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11783 a1c6a512-1295-4272-9138-f99709370657
|
2006-12-17 11:03:19 +00:00 |
|
Marcoen Hirschberg
|
77d039bab8
|
first step in audio driver unification: renaming the functions to audio_*
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11670 a1c6a512-1295-4272-9138-f99709370657
|
2006-12-06 10:24:59 +00:00 |
|
Jens Arnold
|
6adbbc0f2f
|
X5: Slightly lower threshold value to reliably disable constant adc reading when no button is pressed.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11604 a1c6a512-1295-4272-9138-f99709370657
|
2006-11-26 18:24:23 +00:00 |
|
Michael Sevakis
|
f27c266097
|
Just correct a comment and see if the build goes differently.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11578 a1c6a512-1295-4272-9138-f99709370657
|
2006-11-23 19:46:24 +00:00 |
|
Michael Sevakis
|
ab1861a3c2
|
iRiver/iAudio: Added audio_set_recording gain and sound_default to plugin API. Simplified plugin recording by target/-ing some audio functions. UDA1380 records with WSPLL as a result.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11577 a1c6a512-1295-4272-9138-f99709370657
|
2006-11-23 19:21:15 +00:00 |
|
Michael Sevakis
|
58825f6e73
|
Coldfire targets: Got the rest of the coldfire code out of backlight.c. Straightened up related items in configs and split backlight_set_brightness between the normal and boot/sim builds like the other functions. Should really have done all that in the first place.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11502 a1c6a512-1295-4272-9138-f99709370657
|
2006-11-10 18:47:41 +00:00 |
|
Michael Sevakis
|
cf59a4fc1d
|
H300/X5: Moved backlight brightness code to target tree. Created __backlight_set_brightness in backlight-(target).c. backlight_set_brightness range clamps and calls the backlight driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11488 a1c6a512-1295-4272-9138-f99709370657
|
2006-11-10 01:25:52 +00:00 |
|
Michael Sevakis
|
0f5cb94aa4
|
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11452 a1c6a512-1295-4272-9138-f99709370657
|
2006-11-06 18:07:30 +00:00 |
|
Jens Arnold
|
f8b1da2f7b
|
H300, X5: Faster lcd_yuv_blit() using EMAC. Speedup of the function itself at 124MHz: 10.5% on X5, 16.5% on H300. mpegplayer speedup 3..4%
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11429 a1c6a512-1295-4272-9138-f99709370657
|
2006-11-04 00:42:18 +00:00 |
|
Jens Arnold
|
84074cd292
|
Removed remnants of deprecated lcd_roll().
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11409 a1c6a512-1295-4272-9138-f99709370657
|
2006-10-31 19:49:35 +00:00 |
|
Michael Sevakis
|
9e8fe0e4c6
|
General: changed local adc to voltage conversions in several places to use battery_voltage. Added battery_read_info function for unfiltered battery information. x5: removed adc_read as a distinct function. Removed adc tick task. adc_init is empty inline. Adjusted battery scale, voltage to level array and read 10 bits from the ADC for battery since 255 levels is not enough for true centivolt resolution.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11396 a1c6a512-1295-4272-9138-f99709370657
|
2006-10-30 11:33:38 +00:00 |
|
Marcoen Hirschberg
|
ede3d646b9
|
move coldfire ata defines to a shared ata-target.h
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11395 a1c6a512-1295-4272-9138-f99709370657
|
2006-10-30 09:38:34 +00:00 |
|
Michael Sevakis
|
c4a0d45d36
|
Cleanup of new button reading code. Moved functions for enabling of scanning and the decision to scan or not to button_read_device.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11377 a1c6a512-1295-4272-9138-f99709370657
|
2006-10-28 23:10:45 +00:00 |
|
Michael Sevakis
|
2ede2a79e6
|
Put a couple x5-specific function declarations in adc-target.h where they should be.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11358 a1c6a512-1295-4272-9138-f99709370657
|
2006-10-27 08:12:18 +00:00 |
|
Michael Sevakis
|
1d4a9c6366
|
Stop reading buttons if one is not down. Don't read remote keys if not plugged. Good for another few points of boost and 4fps full-screen unboosted. The button scan enabling seems stable and I've been using it without any difficulties but if the interrupts hiccup it could leave them unresponsive. Clearing the GPI0 interrupts before enabling them seems to prevent any difficulties. If there's problems there I'll just leave the remote reading bypass only and 50% of the benefits will still be realized.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11357 a1c6a512-1295-4272-9138-f99709370657
|
2006-10-27 05:31:28 +00:00 |
|
Michael Sevakis
|
784dd78745
|
Moved pcf50606 stuff to target directory.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11348 a1c6a512-1295-4272-9138-f99709370657
|
2006-10-25 23:24:07 +00:00 |
|