Target that have a touchpad/touchscreen should disable it while
being locked (In order to avoid LCD to drain battery power due to
"key locked" constant reporting messages. If they a have a keylock
button this was already handled at driver level. If not (e.g. fuze+),
they will have to implement a switch at driver level that action.c
can operate on softlock.
This patch does the following for any target having a touchpad
or a touchscreen and no HAS_BUTTON_HOLD (ie any softlock target)
1) it implements the code to call button_enable_touch(bool en) in
action.c.
2) button_enable_touch is implemented in button.c and call
either touchpad_enable or touchscreen_enable
3) those two function are implemented respectively in touchscreen.c
and a new touchpad.c file. They provide a generic way to silents touch's
device and call a function at driver level where target specific code
can be implemented if possible/needed (for power saving for instance).
Those function name are touchpad_enable_device and touchscreen_enable_device
4) we implement an empty function at driver level of targets that need it
to have them still being able to compiled.
Change-Id: I9ead78a25bd33466a8533f5b9f259b395cb5ce49
Reviewed-on: http://gerrit.rockbox.org/569
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
move adc_close() prototype to adc.h
don't duplicate prototypes of adc.h
remove license header and guards for a single include of another file or for empty content
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31623 a1c6a512-1295-4272-9138-f99709370657
* Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application)
to break powermgmt.c's assumption about the ability to read battery voltage.
There's now additionally percentage (android) and remaining time measure
(maemo). No measure at all also works (sdl app). If voltage can't be measured,
then battery_level() is king and it'll be used for power_history and runtime
estimation.
* Implement target's API in the simulator, i.e. _battery_voltage(), so it
doesn't need to implement it's own powermgmt.c and other stubs. Now
the sim behaves much more like a native target, although it still
changes the simulated battery voltage quickly,
* Other changes include include renaming battery_adc_voltage() to
_battery_voltage(), for consistency with the new target functions and
making some of the apps code aware that voltage and runtime estimation
is not always available.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657
Same fix as in r29083.
Flyspray: FS#11896
Author: Purling Nayuki
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29102 a1c6a512-1295-4272-9138-f99709370657
This fixes an issue with some Onda VX777's where the LCD doesn't seem to be
correctly inited by the OF SPL.
Based on FS#11888 by Purling Nayuki.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29083 a1c6a512-1295-4272-9138-f99709370657
Also fix a typo that erroneously enabled button_hold in button-target.h
Flyspray: FS#10732
Author: Yann Muller
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23383 a1c6a512-1295-4272-9138-f99709370657
* Use real wakeup events in the battery ADC driver
* Adjust battery charge information a bit
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22458 a1c6a512-1295-4272-9138-f99709370657
* Add support for the VX777
* Remove the touchscreen mode switching combo from the button driver
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21379 a1c6a512-1295-4272-9138-f99709370657
* Add YUV support
* Clean up LCD driver a bit and speed it up
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20730 a1c6a512-1295-4272-9138-f99709370657
* Add Onda VX767 SADC driver
* Unify Onda VX747(+) and Onda VX767 backlight driver
* Also be more consistent wrt file naming.
* Add speaker-onda_vx747.c to SOURCES (forgot to commit this)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20259 a1c6a512-1295-4272-9138-f99709370657
