On OS X HFS is a valid filesystem on an Ipod. When resolving device node to
mountpoints and vice versa also check mounts of hfs partitions. This results in
trying to install the bootloader on a MacPod to show the (intended) MacPod
warning instead of failing with a "could not open ipod" error because no valid
device node could be retrieved. Also, be more strict on matching to prevent
problems with one name being a subset of another.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24802 a1c6a512-1295-4272-9138-f99709370657
Previously MacPods were detected but the mountpoint can't get resolved due to
the different partition layout, thus having a MacPod would only detect the Ipod
itself but not the mountpoint. Rockbox does not support MacPods, so inform the
user as soon as possible.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24799 a1c6a512-1295-4272-9138-f99709370657
We checked if the new firmware block (bootloader+ucl function+packed
bootloader & OF) fit in the OF file, but not if it would run properly.
For example the Clipv2 OF is bigger than 0x50000 bytes uncompressed, but
it fitted in this space when packed and concatenated to a packed
bootloader + ucl function and dualboot code (but we use 1MB of RAM and
not 0x50000 anyway).
Now we check that both bootloader and OF are small enough to be unpacked
at runtime: the unpacked data must be smaller than available memory and
not overlap with ucl function and packed data (although the unpacked and
packed data could probably overlap a bit, I don't know how to calculate
this and this could be quite complex).
total_size() is replaced by check_sizes() which will perform all the
checks and set an error string if the firmware can't be patched.
(both mkamsboot and rbutilqt modified accordingly)
The second problem is that dualboot.S assumed r3 and r5 were left
untouched in the device specific checks. This was undocumented and very
error prone when modifying these checks.
r3 is the last byte of packed copy (bootloader or OF)
r5 is the entry point of uclunpack function derived from r3, so move r5
calculation after the device specific code.
Even if r3 is currently unused in the device specific code, we store it
in memory after copying the ucl function, when it points to the last byte
of packed data (not yet copied at this point since we didn't chose if we
boot the OF or the bootloader), and restore it just before using it so no
restriction is placed on registers usage in device specific code.
Add a new variable ucl_dest in dualboot.S set by mkamsboot.c, which
represents the last bound of buffer where we copy the ucl function, and
then the packed data (bootloader or OF).
RAM_SIZE definition is moved from dualboot.S to mkamsboot.c new
model_memory_size(), where it is a bit better documented.
Tested on e200v2 and Clip+
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24772 a1c6a512-1295-4272-9138-f99709370657
- handle disabled platforms also for for variant and base groups.
- make variant detection more strict to prevent variants that are a substring
of other variants to match. Happened e.g. for iriverh10 and iriverh100.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24625 a1c6a512-1295-4272-9138-f99709370657
ipodInitialize() is not supposed to close but only to open the disk handle. Fixes a segfault when trying to install the ipod bootloader on windows.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24608 a1c6a512-1295-4272-9138-f99709370657
Note that disabled targets support is not intended for use by end users.
This is to make development (and testing of svn) easier and should get
disabled for releases.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24513 a1c6a512-1295-4272-9138-f99709370657
Doing so removes the need to loop over all targets to fill in values for
target variants in ServerInfo.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24427 a1c6a512-1295-4272-9138-f99709370657
With the separation of the SystemInfo values accessing all the values
will create traces, making them rather noisy due to unnecessary multiple
accesses.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24373 a1c6a512-1295-4272-9138-f99709370657
OS X requires to unmount the player during bootloader installation on Sansas / Ipods. The system remounts the player automatically after a short while.
Not waiting for the system to remount the player will result in a changed mount point, making the small / full install write the main build to the wrong
location.
This currently waits up to 60 seconds for the player to get remounted until it errors out. This value seems to be sufficient, if it's not please report
so we can adjust it. Also, the waiting can't be interrupted right now.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23716 a1c6a512-1295-4272-9138-f99709370657
- adjust the regex to figure the correct drive from the partition name.
- move the check for an old bootloader into the first installation step -- it's a fatal problem so it should appear as soon as possible.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23715 a1c6a512-1295-4272-9138-f99709370657
The OF could have been stored by the user with a different name
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23700 a1c6a512-1295-4272-9138-f99709370657
- Display the name of a detected unsupported player when running autodetection from the configuration window.
- Extend the list of known-unsupported players.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22334 a1c6a512-1295-4272-9138-f99709370657
Remove the ugly "save, change and restore platform" accesses and extend the settings class to allow accessing player specific system values.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22254 a1c6a512-1295-4272-9138-f99709370657
Move check() function out of the Detect class and place it into utils.cpp for now. Rename Detect class to System, as it now only retrieves data about the underlying system and doesn't detect anything anymore. Cleans up with the confusion between Detect and Autodetection.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22238 a1c6a512-1295-4272-9138-f99709370657
Simplify RockboxInfo file handling. Remove Detect::installedVersion() and Detect::installedTarget(), as those became wrappers around RockboxInfo without functionality.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22237 a1c6a512-1295-4272-9138-f99709370657
Remove the hardcoded special case for the H10 bootloader installation and uninstallation. Allow multiple bootloader filenames to be present and pick the existing one on (un)installation. This is also needed for easily adding support for the Samsung YH players (to make FS#10373 actually work).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22220 a1c6a512-1295-4272-9138-f99709370657
Use "qmake -config libusb1" to use libusb-1.0 instead of libusb-0.1.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22205 a1c6a512-1295-4272-9138-f99709370657
- introduce a talkgenerator to better share code between voice and talk generation.
- name intermediate .talkfiles after the md5sum of the text. (prevents naming problems).
- do not directly use the logger, instead emit signals.
- move talkfile and voicefile generation to base/
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21524 a1c6a512-1295-4272-9138-f99709370657
- Use signals for updating the progress logger from ZipInstaller class.
- Move ZipInstaller class to base folder as it doesn't rely on QtGui anymore.
- cleanup debugging output a bit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20845 a1c6a512-1295-4272-9138-f99709370657
- use better names for member functions
- don't emit aborted() when exiting a successful log
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20844 a1c6a512-1295-4272-9138-f99709370657
- use a single member function for accessing a settings value.
- use an enum to figure the correct value in the settings file instead of functions.
- return the settings value as QVariant instead and leave converting to the caller.
- accept QVariant as value when setting values.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20823 a1c6a512-1295-4272-9138-f99709370657
check the downloaded bootloader file against the target reported by sansapatcher as otherwise one could install an e200 bootloader to a c200 (and vice versa).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20630 a1c6a512-1295-4272-9138-f99709370657
1. Make Themesite integration work again
2. Fix FS#10055 (Theme sizes are 0) and FS#10061 (Incorrect Target missmatch detected)
3. Rename platform and voicename in rbutil.ini to reflect better what they are. (modelnames from either configure or the buildserver)
4. Fix a few places where they were used incorrectly
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20558 a1c6a512-1295-4272-9138-f99709370657
