Commit graph

3 commits

Author SHA1 Message Date
Aidan MacDonald
92140752d7 FiiO M3K: disable CPU frequency switching
After conducting some simplistic tests, I found that the power usage
did not appear to be affected by the CPU frequency.

I tested by playing back a 44.1 KHz FLAC file on single track repeat,
and measured current with the AXP173's battery discharge current ADC.
The button and LCD backlights were set to always on. Headphones were
unplugged and the volume was muted to eliminate any influence from
the headphone amp.

On average the current usage was between 78-81 mA at 1008 MHz, 252 MHz,
and 112 MHz. If anything, 1008 MHz drew _less_ current than the lower
frequencies, by about 1-3 mA.

A possible explanation for this, assuming it's not just a bias of the
test, is that the CPU idle state saves so much power that it's better
to maximize the real time that the CPU spends idling. More systematic
testing is needed to confirm this.

Change-Id: I527473e8c4c12bc1e94f8d4e849fecc108022abe
2021-04-17 20:24:36 +00:00
Aidan MacDonald
fceffb7d4a x1000: disable CPU idle stats by default
There's no point including this in normal builds: the stats are not
used for anything, they are not really of interest to anyone except
developers, and add a small overhead to the kernel tick.

Change-Id: I1b4f67cc62d11d634a8cec279dca513dd10eea96
2021-04-17 20:24:21 +00:00
Aidan MacDonald
3ec66893e3 New port: FiiO M3K on bare metal
Change-Id: I7517e7d5459e129dcfc9465c6fbd708619888fbe
2021-03-28 00:01:37 +00:00