- When trying to retrieve the human readable device name on target mismatch
detection it is not possible to figure the "extra" variant internally used
from the information in rockbox-info.txt. Since the h10_5gb didn't have a
non-extra version resolving the name would fail. Remove the extra part for
the UMS version so that will get used. It's better to display a slightly
wrong name instead of none.
- Add some comments describing the sections and their values.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30887 a1c6a512-1295-4272-9138-f99709370657
Instead of showing the target name as stored in rockbox-info.txt retrieve the full descriptive name.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30886 a1c6a512-1295-4272-9138-f99709370657
The buildserver_modelname is still in use, and the commit missed some parts on
removal, causing segfaults on start.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30884 a1c6a512-1295-4272-9138-f99709370657
Since changing the manual URL creation to be template based this value isn't
used anymore. It's also pretty much the same as configure_modelname, so remove
it completely.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30869 a1c6a512-1295-4272-9138-f99709370657
When building the linked libraries pass the machine flag as well. For now add
them to the compiler variable directly, should go via CFLAGS later.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30868 a1c6a512-1295-4272-9138-f99709370657
Add as disabled targets with disabled bootloader support. As soon as they are
available in the build system this will allow installing except for
bootloaders.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30863 a1c6a512-1295-4272-9138-f99709370657
Targets with special case URL for the manual (i.e. targets that share the
manual with another target, f.e. h100 series) have been forgotten during the
target renaming. Update those names and convert the manual URL handling to
be template based.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30848 a1c6a512-1295-4272-9138-f99709370657
* add support for OF version 01.01.17 in mkamsboot
* introduce and implement oled_brightness function
* configure voltage CVDD2 to 2.8V (like the OF does)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30831 a1c6a512-1295-4272-9138-f99709370657
The Speex codec has a special license requiring it to be reproduced with any
distribution. Add the license as a separate tab in the About dialog to satisfy
this.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30816 a1c6a512-1295-4272-9138-f99709370657
Since a translation change can affect the locale the locale-dependent strings
need to be refreshed explicitly.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30634 a1c6a512-1295-4272-9138-f99709370657
When changing the language don't require a restart anymore. Instead listen to
the appropriate changeEvent and retranslate the UI. Designer generated UI files
already provide such a function.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30633 a1c6a512-1295-4272-9138-f99709370657
On Windows extend the QIcon used as window icon with the bigger Rockbox icon as
well. W7 wants a larger one for the taskbar if large icons are enabled, and for
the task switcher. Scaling the small one up looks ugly.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30630 a1c6a512-1295-4272-9138-f99709370657
Voicefile generation now can correct strings for the TTS system similar
to what voice.pl does. The current implementation has some limitations:
- only implemented for voicefile creation.
- the corrections file is built in and can't get changed.
- string corrections can be disabled in the configuration dialog.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30628 a1c6a512-1295-4272-9138-f99709370657
- update png icons
- update ico file for Windows and add images for high resolutions (Vista, W7).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30626 a1c6a512-1295-4272-9138-f99709370657
There is no real visual difference so save a few bytes by using a different image format.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30625 a1c6a512-1295-4272-9138-f99709370657
Support retrieving the vendor name of the TTS. This will be used by TTS string
corrections. Currently no other TTS but SAPI supports this, and only correction
strings for SAPI voices depend on the vendor information.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30609 a1c6a512-1295-4272-9138-f99709370657
- When building for Rockbox Utility the called Makefiles would rebuild the libs
every time. Change dependencies a bit to allow make to properly detect if the
lib is already up to date.
- Remove dependency on output folder in some cases to avoid unnecessary
rebuilds.
- Add standard Rockbox header to files lacking it.
- Make make calls from qmake silent.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30608 a1c6a512-1295-4272-9138-f99709370657
strcpy() will terminate the string with zero,
the boot sector/buffer has only space for eight characters.
Credit goes to "cppcheck".
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30351 a1c6a512-1295-4272-9138-f99709370657
Enlarge the default size of the dialog to something more reasonable for the
extended information displayed.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30215 a1c6a512-1295-4272-9138-f99709370657
Allow passing an (optional) cluster size to round up all file sizes when
calculating the total size of an extracted zip archive. This allows to check if
the space on disk is actually sufficient without relying on an arbitrary
headroom value which might be wrong. Addresses FS#12195.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30214 a1c6a512-1295-4272-9138-f99709370657
On OS X Configure and Quit menu entries are not placed in the File menu. Qt
handles that for us if they are not translated, and translations are then
handled automatically (as well as setting the OS X specific accelerator keys).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30147 a1c6a512-1295-4272-9138-f99709370657
Those functions are rather general, so put them into the Utils class instead.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30146 a1c6a512-1295-4272-9138-f99709370657
Make sure to convert it on reading to avoid not finding it even if stored with
native separators in the configuration. Fix a warning on Windows.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30145 a1c6a512-1295-4272-9138-f99709370657
The delegate will be used for the dropdown list and show both mountpoint (left
aligned) and label / size information (right aligned). This improves
readability compared to the previous implementation. Also, the mountpoint
itself is now the text of the combo box and the additional information is in
the Qt::UserRole to avoid having to handle a user entered mountpoint separately
(since previously the mountpoint was stored in Qt::UserRole, but an edited item
would have the value in Qt::TextRole).
Disable editing the combo box entry for release builds, it shouldn't be needed
by users.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30144 a1c6a512-1295-4272-9138-f99709370657
When its possible to retrieve the label of the selected mountpoint display it
in the main window too. Right now this only affects Windows.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30143 a1c6a512-1295-4272-9138-f99709370657
With the rework of the mountpoint selection the tree browser isn't used
anymore.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30142 a1c6a512-1295-4272-9138-f99709370657
In mountpoint selection and system info dialog show the volume name to make it
easier to identify a specific device.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30141 a1c6a512-1295-4272-9138-f99709370657
Instead of entering the mountpoint via a tree browser or manually use a combo
box that lists all available drives / mountpoints. This also allows to easily
add more information like the free and total size for each mountpoint. For
development this can still be overriden by editing the dropdown value manually.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30140 a1c6a512-1295-4272-9138-f99709370657
This should help identifying the correct player by size, since the free space
is only useful to figure if there is enough space to install Rockbox. Change
units to GiB since that is more useful given the size of current devices.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30139 a1c6a512-1295-4272-9138-f99709370657
