leave plugin entries in ram and try not to save them unless necessary
doesn't use more space just a bit of careful ordering with the buffer
Change-Id: I1973e9ad4655c2544f596b37cee35601a0cffa94
I'm currently running up against the limitations of the lcd_draw functions
I want these functions to be able to be used on any size buffer not
just buffers with a stride matching the underlying device
[DONE] allow the framebuffer to be decoupled from the device framebuffer
[DONE need examples] allow for some simple blit like transformations
[DONE] remove the device framebuffer from the plugin api
[DONE}ditto remote framebuffer
[DONE] remove _viewport_get_framebuffer you can call struct *vp = lcd_set_viewport(NULL) and vp->buffer->fb_ptr
while remote lcds may compile (and work in the sim) its not been tested on targets
[FIXED] backdrops need work to be screen agnostic
[FIXED] screen statusbar is not being combined into the main viewport correctly yet
[FIXED] screen elements are displayed incorrectly after switch to void*
[FIXED] core didn't restore proper viewport on splash etc.
[NEEDS TESTING] remote lcd garbled data
[FIXED] osd lib garbled screen on bmp_part
[FIXED] grey_set_vp needs to return old viewport like lcd_set_viewport
[FIXED] Viewport update now handles viewports with differing buffers/strides by copying to the main buffer
[FIXED] splash on top of WPS leaves old framebuffer data (doesn't redraw)
[UPDATE] refined this a bit more to have clear_viewport set the clean bit and have skin_render do its own screen clear
scrolling viewports no longer trigger wps refresh
also fixed a bug where guisyncyesno was displaying and then disappearing
[ADDED!] New LCD macros that allow you to create properly size frame buffers in you desired size without wasting bytes
(LCD_ and LCD_REMOTE_)
LCD_STRIDE(w, h) same as STRIDE_MAIN
LCD_FBSTRIDE(w, h) returns target specific stride for a buffer W x H
LCD_NBELEMS(w, h) returns the number of fb_data sized elemenst needed for a buffer W x H
LCD_NATIVE_STRIDE(s) conversion between rockbox native vertical and lcd native stride (2bitH)
test_viewports.c has an example of usage
[FIXED!!] 2bit targets don't respect non-native strides
[FIXED] Few define snags
Change-Id: I0d04c3834e464eca84a5a715743a297a0cefd0af
Note: I left behind lcd_bitmap in features.txt, because removing it
would require considerable work in the manual and the translations.
Change-Id: Ia8ca7761f610d9332a0d22a7d189775fb15ec88a
'swcodec' is now always set (and recording_swcodec for recording-capable
units) in feature.txt so the manual and language strings don't need to
all be fixed up.
Change-Id: Ib2c9d5d157af8d33653e2d4b4a12881b9aa6ddb0
This allows targets to automatically switch audio settings when the
line out is plugged/unplugged.
Only hooked up on the xDuoo X3, but there are other potential users.
Change-Id: Ic46a329bc955cca2e2ad0335ca16295eab24ad59
Unifies time formatting in settings_list.c allows time format to
display as HH:MM:SS.MSS or any consecutive combination thereof
(hh:mm:ss, mm:ss, mm:ss.mss, ss.mss, hh, mm, ss ,mss)
works in INT and TABLE settings with the addition of flag 'F_TIME_SETTING'
Time is auto-ranged dependent on value
Adds talk_time_intervals to allow time values to be spoken similar to
display format: x Hours, x Minutes, x Seconds, x Milliseconds
Table lookups merged or removed from recording, clip meter and lcd timeout
-String_Choice replaced with TABLE_SETTING or INT_SETTING for these
functions as well, cleaned-up cfg_vals that get saved to cfgfile
RTL Languages ARE supported
Negative values ARE supported
Backlight on/off are now Always and Never to share formatter with LCD
Timeout
Added flag to allow ranged units to be locked to a minimum index
Added flag to allow leading zero to be supressed from the largest unit
merged talk_time_unit() and talk_time_intervals()
optimized time_split()
optimized format_time_auto()
Backlight time-out list same as original
Change-Id: I59027c62d3f2956bd16fdcc1a48b2ac32c084abd
output_dyn_value now requires the count for number of units
Binary scale now shows Kibibytes instead of kilobytes (g#1742)
Fixes output for negative values as well
Change-Id: I8aa896860e97d2453fa35069e2dfe1caac60109f
Do as with fdprintf and avoid filesystem calls for every single
byte. If it overreads, just put the excess back with lseek, which
does no I/O itself.
Change-Id: Ifd5d21b5dca7183346e44d365d3f7d45e8cc6438
The new vuprintf makes unnecessary workarounds due to formatting
limitations. I checked grep output for whatever appeared to fit
but it's possible I missed some instances because they weren't
so obvious.
Also, this means sound settings can dynamically work with any
number of decimals rather than the current assumption of one or
two. Add an ipow() function to help and take advantage of dynamic
field width and precision. Consolidate string formatting of sound
settings.
Change-Id: I46caf534859dfd1916cd440cd25e5206b192fcd8
On Windows 64-bit, the size of long is 32-bit, thus any pointer to long cast is
not valid. In any case, one should use intptr_t and ptrdiff_t when casting
to integers. This commit attempts to fix all instances reported by GCC.
When relevant, I replaced code by the macros PTR_ADD, ALIGN_UP from system.h
Change-Id: I2273b0e8465d3c4689824717ed5afa5ed238a2dc
The implementation is not very complicated but there are a few things worth
noting. There was a previous "speaker enable" setting but it was a boolean.
I decided to replace it with a choice setting that has 2 options (on, off)
if headphones cannot be detect on this target, or 3 options (on, off, auto)
if we can detect headphones. This will break the old setting on target that
cannot detect jack but it makes the code more uniform and avoid maintaining
two settings with more #ifdef. The third option (auto) uses the LANG_AUTO
text, which I think is clear enough (disable speaker on jack plug).
In order to avoid code duplication (both in apps and firmware), I decided to
keep the audiohw_enable_speaker function as-is: it takes a boolean and doesn't
care about the speaker policy. I introduced a new audio_enable_speaker that
takes directly the mode (which follows the setting encoding): 0=off, 1=on
and 2=auto. This way one calls audio_enable_speaker and it changes the speaker
once to reflect the request mode. The apps code then uses this function in the
places where it makes sense: on setting load, setting change and jack (un)plug
event.
Change-Id: I027873f698eb4bc365d7c02b515297806355d9e2
This patch redoes the filesystem code from the FAT driver up to the
clipboard code in onplay.c.
Not every aspect of this is finished therefore it is still "WIP". I
don't wish to do too much at once (haha!). What is left to do is get
dircache back in the sim and find an implementation for the dircache
indicies in the tagcache and playlist code or do something else that
has the same benefit. Leaving these out for now does not make anything
unusable. All the basics are done.
Phone app code should probably get vetted (and app path handling
just plain rewritten as environment expansions); the SDL app and
Android run well.
Main things addressed:
1) Thread safety: There is none right now in the trunk code. Most of
what currently works is luck when multiple threads are involved or
multiple descriptors to the same file are open.
2) POSIX compliance: Many of the functions behave nothing like their
counterparts on a host system. This leads to inconsistent code or very
different behavior from native to hosted. One huge offender was
rename(). Going point by point would fill a book.
3) Actual running RAM usage: Many targets will use less RAM and less
stack space (some more RAM because I upped the number of cache buffers
for large memory). There's very little memory lying fallow in rarely-used
areas (see 'Key core changes' below). Also, all targets may open the same
number of directory streams whereas before those with less than 8MB RAM
were limited to 8, not 12 implying those targets will save slightly
less.
4) Performance: The test_disk plugin shows markedly improved performance,
particularly in the area of (uncached) directory scanning, due partly to
more optimal directory reading and to a better sector cache algorithm.
Uncached times tend to be better while there is a bit of a slowdown in
dircache due to it being a bit heavier of an implementation. It's not
noticeable by a human as far as I can say.
Key core changes:
1) Files and directories share core code and data structures.
2) The filesystem code knows which descriptors refer to same file.
This ensures that changes from one stream are appropriately reflected
in every open descriptor for that file (fileobj_mgr.c).
3) File and directory cache buffers are borrowed from the main sector
cache. This means that when they are not in use by a file, they are not
wasted, but used for the cache. Most of the time, only a few of them
are needed. It also means that adding more file and directory handles
is less expensive. All one must do in ensure a large enough cache to
borrow from.
4) Relative path components are supported and the namespace is unified.
It does not support full relative paths to an implied current directory;
what is does support is use of "." and "..". Adding the former would
not be very difficult. The namespace is unified in the sense that
volumes may be specified several times along with relative parts, e.g.:
"/<0>/foo/../../<1>/bar" :<=> "/<1>/bar".
5) Stack usage is down due to sharing of data, static allocation and
less duplication of strings on the stack. This requires more
serialization than I would like but since the number of threads is
limited to a low number, the tradoff in favor of the stack seems
reasonable.
6) Separates and heirarchicalizes (sic) the SIM and APP filesystem
code. SIM path and volume handling is just like the target. Some
aspects of the APP file code get more straightforward (e.g. no path
hashing is needed).
Dircache:
Deserves its own section. Dircache is new but pays homage to the old.
The old one was not compatible and so it, since it got redone, does
all the stuff it always should have done such as:
1) It may be update and used at any time during the build process.
No longer has one to wait for it to finish building to do basic file
management (create, remove, rename, etc.).
2) It does not need to be either fully scanned or completely disabled;
it can be incomplete (i.e. overfilled, missing paths), still be
of benefit and be correct.
3) Handles mounting and dismounting of individual volumes which means
a full rebuild is not needed just because you pop a new SD card in the
slot. Now, because it reuses its freed entry data, may rebuild only
that volume.
4) Much more fundamental to the file code. When it is built, it is
the keeper of the master file list whether enabled or not ("disabled"
is just a state of the cache). Its must always to ready to be started
and bind all streams opened prior to being enabled.
5) Maintains any short filenames in OEM format which means that it does
not need to be rebuilt when changing the default codepage.
Miscellaneous Compatibility:
1) Update any other code that would otherwise not work such as the
hotswap mounting code in various card drivers.
2) File management: Clipboard needed updating because of the behavioral
changes. Still needs a little more work on some finer points.
3) Remove now-obsolete functionality such as the mutex's "no preempt"
flag (which was only for the prior FAT driver).
4) struct dirinfo uses time_t rather than raw FAT directory entry
time fields. I plan to follow up on genericizing everything there
(i.e. no FAT attributes).
5) unicode.c needed some redoing so that the file code does not try
try to load codepages during a scan, which is actually a problem with
the current code. The default codepage, if any is required, is now
kept in RAM separarately (bufalloced) from codepages specified to
iso_decode() (which must not be bufalloced because the conversion
may be done by playback threads).
Brings with it some additional reusable core code:
1) Revised file functions: Reusable code that does things such as
safe path concatenation and parsing without buffer limitations or
data duplication. Variants that copy or alter the input path may be
based off these.
To do:
1) Put dircache functionality back in the sim. Treating it internally
as a different kind of file system seems the best approach at this
time.
2) Restore use of dircache indexes in the playlist and database or
something effectively the same. Since the cache doesn't have to be
complete in order to be used, not getting a hit on the cache doesn't
unambiguously say if the path exists or not.
Change-Id: Ia30f3082a136253e3a0eae0784e3091d138915c8
Reviewed-on: http://gerrit.rockbox.org/566
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested: Michael Sevakis <jethead71@rockbox.org>
This complements offset-based resume and playback start funcionality.
The implementation is global on both HWCODEC and SWCODEC.
Basically, if either the specified elapsed or offset are non-zero,
it indicates a mid-track resume.
To resume by time only, set elapsed to nonzero and offset to zero.
To resume by offset only, set offset to nonzero and elapsed to zero.
Which one the codec uses and which has priority is up to the codec;
however, using an elapsed time covers more cases:
* Codecs not able to use an offset such as VGM or other atomic
formats
* Starting playback at a nonzero elapsed time from a source that
contains no offset, such as a cuesheet
The change re-versions pretty much everything from tagcache to nvram.
Change-Id: Ic7aebb24e99a03ae99585c5e236eba960d163f38
Reviewed-on: http://gerrit.rockbox.org/516
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested: Michael Sevakis <jethead71@rockbox.org>
When changing activities (those that are indicated via %cs skin tag), the sbs
needs to be updated, so that the UI viewport can be applied before that
activity draws its UI.
Fixes FS#12804. I hope this commit doesn't have bad side effects.
Change-Id: If45654e356749f5f27991430dbd1da6f23e6f802
Add a "volume limit" parameter to the configuration file. The maximum
value of volume setting in sound menu will be limited to the same as
volume limit. Also each time when setvol() is excuted, Rockbox will
check if the global_settings.volume value larger than
global_settings.volume_limit. If larger, take the value of volume_limit
instead. The volume_limit argument shares the same maximum and minimum values
with volume argument, while taking the maximum volume as its default value.
Change-Id: I8ca9bc6ea6e617b48fc346aae5f2a0a1d259ae36
Reviewed-on: http://gerrit.rockbox.org/697
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
Originally written and uploaded by Lalufu (Ralf Ertzinger) in Feb 2012.
They have been condensed into a single patch and some further additions
by Andy Potter.
Currently includes Authentication V2 support from iPod to Accessory,
RF/BlueTooth transmitter support, selecting a playlist and selecting a
track from the current playlist. Does not support uploading Album Art
or podcasts. Has been tested on the following iPods,
4th Gen Grayscale, 4th Gen Color/Photo, Mini 2nd Gen, Nano 1st Gen and
Video 5.5Gen.
Change-Id: Ie8fc098361844132f0228ecbe3c48da948726f5e
Co-Authored by: Andy Potter <liveboxandy@gmail.com>
Reviewed-on: http://gerrit.rockbox.org/533
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
* Remove explicit tracking of elapsed time of previous track.
* Remove function to obtain auto skip flag.
* Most playback events now carry the extra information instead and
pass 'struct track_event *' for data.
* Tweak scrobbler to use PLAYBACK_EVENT_TRACK_FINISH, which makes
it cleaner and removes the struct mp3entry.
Change-Id: I500d2abb4056a32646496efc3617406e36811ec5
The browser lets the user pick one or more directories in a convinient
GUI browser. The initial directory list is read from a string
(separated by colons) and the resulting list is written back to the same
string (again separated by colons).
Note: The work was initially done by Jonathan Gordon, however I changed
it substantially so I claim autorship.
This selector is going to be used for autoresume and database scan folders.
Change-Id: Id1d3186dad783411eb5c6056ce93f5b6123c7aa0
Moves replaygain definitions to lib/rbcodec/dsp/dsp_misc.h.
Intermediate functions in misc.c handle any adjustment and calling
the rbcodec APIs.
Change-Id: I9f03561bca9aedd13760cf19c4e19aa3c68e7024
Reviewed-on: http://gerrit.rockbox.org/140
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Use generic void * and size_t and make mp3_play_data and its callback
agree on types. Use mp3_play_callback_t instead of prototyping
right in the function call (so it's not so messy to look at). Change
doesn't appear to require plugin API version increment.
Change-Id: Idcab2740ee316a2beb6e0a87b8f4934d9d6b3dd8
Just use a bool to indicate raw button instead of action code. No
bother with plugin version yet again so soon.
Change-Id: I4aa075c0c1fb5308c9d49bebb30ac76f671b2335
Adds a new context, CONTEXT_RAWBUTTON, that I hope is out of the way
of everything. Unfortunately have to increment min plugin API version
for the second time today to accomodate additional parameter.
Change-Id: Iaa46b926e57cf377fd4906f2d42bb98e87215033
* Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application)
to break powermgmt.c's assumption about the ability to read battery voltage.
There's now additionally percentage (android) and remaining time measure
(maemo). No measure at all also works (sdl app). If voltage can't be measured,
then battery_level() is king and it'll be used for power_history and runtime
estimation.
* Implement target's API in the simulator, i.e. _battery_voltage(), so it
doesn't need to implement it's own powermgmt.c and other stubs. Now
the sim behaves much more like a native target, although it still
changes the simulated battery voltage quickly,
* Other changes include include renaming battery_adc_voltage() to
_battery_voltage(), for consistency with the new target functions and
making some of the apps code aware that voltage and runtime estimation
is not always available.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657
Otherwise single presses and all wheel movements will cause a click. with "keyclick repeat" enabled *all* repeats will cause clicks
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30997 a1c6a512-1295-4272-9138-f99709370657
Origional implementation by Robert Keevil with contributions from Frederik Vestre, Stoyan Stratev, Craig Elliott, Michael Sparmann, Thomas Schott, Rosso Maltese, and syncs from a bunch of other people!
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30995 a1c6a512-1295-4272-9138-f99709370657
