Robert Kukla
275a30092e
initial commit of remote support for m:robe 100 courtesy of lowlight; simulator support including small fixes for the m:robe 500
...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22053 a1c6a512-1295-4272-9138-f99709370657
2009-07-26 14:26:14 +00:00
Thomas Martitz
a7f4e1f1c5
Simulate lcd_enable and lcd_sleep in the simulator. Therefore, turn backlight-sim.h into a .c too.
...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20829 a1c6a512-1295-4272-9138-f99709370657
2009-04-29 22:24:40 +00:00
Frank Gevaerts
86b4543fed
Enable USB mass storage on PP5020, PP5022 and PP5024 targets
...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20105 a1c6a512-1295-4272-9138-f99709370657
2009-02-25 22:40:15 +00:00
Frank Gevaerts
9698c3bb5c
replace USB_IPODSTYLE by USB_HANDLED_BY_OF as that's what it actually means. Fix various configs to use it correctly.
...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20078 a1c6a512-1295-4272-9138-f99709370657
2009-02-21 17:56:31 +00:00
Jens Arnold
0d935ce75e
Put the display colours for monochrome and greyscale targets into the target config files, and use them both for the simulator UI and screendumps. The Clip now shows the split display properly in screendumps and simulator. A side effect is that screendumps of ordinary monochrome targets are now 4-bit BMP files (saves an alternate code path, and might be more compatible with some gfx programs). * Simplify the simulation of split display, and also simplify greylib simulation. The simulator now always calculates 129 shades (2*128 for a Clip sim), and just uses 2 (or 4) of those for native display simulation. * Centralised the simulator LCD dimension definition.
...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19950 a1c6a512-1295-4272-9138-f99709370657
2009-02-09 00:32:59 +00:00
Thomas Martitz
12a0ed3b8d
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19860 a1c6a512-1295-4272-9138-f99709370657
2009-01-26 23:21:49 +00:00
Michael Sevakis
e69d567d9e
Bring consistency to pcm implementation and samplerate handling. Less low-level duplication. A small test_sampr fix so it works on coldfire again.
...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19400 a1c6a512-1295-4272-9138-f99709370657
2008-12-12 11:01:07 +00:00
Frank Gevaerts
19d1cacb1a
cleanup storage defines
...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18950 a1c6a512-1295-4272-9138-f99709370657
2008-10-31 21:25:04 +00:00
Nils Wallménius
2f50cd58b9
Codec memory reorganization
...
Based on a patch by Tomasz Malesinski
* Merge Codec buffer and Malloc buffer into one large buffer.
* The new merged buffer is now 1MB on targets with lots of memory.
* Renamed codec_get_memory to codec_get_buffer and made it behave more.
like plugin_get_buffer.
* Bumped Codec api and min api versions.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18834 a1c6a512-1295-4272-9138-f99709370657
2008-10-19 12:35:53 +00:00
Frank Gevaerts
46573019a5
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18735 a1c6a512-1295-4272-9138-f99709370657
2008-10-07 19:37:33 +00:00
Michael Sevakis
009cebeab2
Straigten-out lcd sleeping on Gigabeat F/X. Add a service function to backlight.c to handle lcd sleep timer. Make HAVE_LCD_SLEEP useable without a setting and use HAVE_LCD_SLEEP_SETTING when a setting is available in addition to HCD_HAVE_SLEEP. If a setting isn't used, the target must define the timeout to be used in the config.
...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17505 a1c6a512-1295-4272-9138-f99709370657
2008-05-14 19:29:25 +00:00
Robert Kukla
b39f9bffde
m:robe 100 - backlight PWM fading
...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17248 a1c6a512-1295-4272-9138-f99709370657
2008-04-25 20:06:42 +00:00
Robert Kukla
4c86e34517
m:robe 100 - enable setting for buttonlight brightness
...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17134 a1c6a512-1295-4272-9138-f99709370657
2008-04-15 23:38:45 +00:00
Robert Kukla
f51f98e134
m:robe 100
...
- lcd driver tidied up and optimised
- lcd flip and inverse display enabled
(based on logikdax driver and work by lowlight)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16944 a1c6a512-1295-4272-9138-f99709370657
2008-04-03 11:08:38 +00:00
Marcoen Hirschberg
be40427bae
use HAVE_ATA to decide if ata.c should be compiled
...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16842 a1c6a512-1295-4272-9138-f99709370657
2008-03-27 10:58:36 +00:00
Robert Kukla
c3e440882c
m:robe 100: add correct USB VID and PID
...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16477 a1c6a512-1295-4272-9138-f99709370657
2008-03-02 12:08:31 +00:00
Robert Kukla
9dc67828a9
mrobe 100: real time clock (if anybody recognises the RTC chip let me know)
...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16208 a1c6a512-1295-4272-9138-f99709370657
2008-02-03 18:15:39 +00:00
Robert Kukla
47cfed1f1b
audio on the m:robe 100
...
- using the existing wm8751 driver (from gigabeat port) integrated into the portal player environment
- only 44.1kHz at the moment
- for some reason the output is very quiet
- due to the lack of usable buttons the easiest (?) way to start an audio file is to copy the .playlist_control, config.cfg and nvram.bin files from another target, where auto resume is enabled.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16117 a1c6a512-1295-4272-9138-f99709370657
2008-01-20 12:59:23 +00:00
Robert Kukla
a615aabc33
- share adc reading code between h10 and mrobe100
...
- battery voltage calibrated and used for mrobe100
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16064 a1c6a512-1295-4272-9138-f99709370657
2008-01-12 20:36:45 +00:00
Robert Kukla
7d961d390a
m:robe 100:
...
- adjust lcd_grey_phase_blit() parameter to recent change
- detection of external power
- compilation of plugins - need to be enabled individually in SOURCES/SUBDIRS
(use autostart.rock as test plugin with limited interaction via BUTTON_POWER)
also
- move autostart.rock to apps dir where it is expected
- set missing svn:keywords for various files
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16056 a1c6a512-1295-4272-9138-f99709370657
2008-01-11 21:48:01 +00:00
Robert Kukla
12cc3cc47c
mrobe 100:
...
- temporarily disable shutdown on low power
- enable power button for minimal interaction (not shutdown yet)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16049 a1c6a512-1295-4272-9138-f99709370657
2008-01-10 21:51:44 +00:00
Mark Arigo
e953bcb2d4
Add missing files for the m:robe 100
...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16032 a1c6a512-1295-4272-9138-f99709370657
2008-01-09 13:59:18 +00:00