To be sure that there is no mistake in this code, it is run *after*
the known to work HOME & LEFT buttons checks, unlike other Sansas
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26122 a1c6a512-1295-4272-9138-f99709370657
- Enable end of charge monitoring once, it doesn't need to be disabled
- Acknowledge the first (wrong) end of charge interrupt on charger enable
(this had been broken in r25299)
- Centralize reads to ENRD* registers and cache the results when needed
- on PP it is not needed because reads are atomic, we only check for
end of charge when the charging, and for charger presence when
discharging
as3525v2 (using as3543) specifics
- I got the datasheet today from AMS, thanks to them for being so fast
and not require me to sign tons of papers!
- USB detection now works on as3525v2 using the as3543. Clip+ won't
reboot to OF yet, it needs mkamsboot support first (usbstack disabled)
- Charging should work, the CHARGER register is at a different place, it
is an extended PMU register -> use ascodec_read/write_charger() to
access it
- real interrupts are not used yet for ENRD, we get thousands of
interrupts per second, apparently only limited by the i2c clock.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26116 a1c6a512-1295-4272-9138-f99709370657
SDL docs say SDL_PumpEvent (implicitely called by SDL_Poll/WaitEvent)
may only be called from the thread that initializes the video subsystem,
apparently because Windows requires that.
So create an (or bring it back) SDL thread (with preemtive behavior) to read the
event queue for buttons and initialize the video subsystem.
I'd probably would have done that anyway because it enables an interrupt-like method to read them (no polling).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26113 a1c6a512-1295-4272-9138-f99709370657
put your station images in .rockbox/fmpresets/<preset name>.bmp or .jpg. Must be in preset mode and the preset name must match the filename
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26078 a1c6a512-1295-4272-9138-f99709370657
Better be safe than sorry, don't try to read/write outside our storage,
because we might overwrite the OF on the internal storage
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26077 a1c6a512-1295-4272-9138-f99709370657
-> Change references to as3517 into as3515
there is a reference to the as3515 in the public as3525 datasheet to
support this fact
as3517 is used in the as3527 SoC, the (public) as3527 datasheet has
detailed information on its registers
the audio codec/PMU used in as3525v2 (thought to be as3543) appears to be
compatible (identical?) with as3517
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26075 a1c6a512-1295-4272-9138-f99709370657
This sort of change should never go in without prior discussion or consensus
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26071 a1c6a512-1295-4272-9138-f99709370657
- Refactor the program startup. main() is now in main.c like on target, and the implicit application thread will now act as our main thread (previously a separate one was created for this in thread initialization).
This is part of Rockbox as an application and is the first step to make an application port from the uisimulator. In a further step the sim bits from the sdl build will be separated out.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26065 a1c6a512-1295-4272-9138-f99709370657
it would still flash when the light was off
it turns out that if B5 is set to input the light can't be turned on
but we can still select between µSD slot and internal storage
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26059 a1c6a512-1295-4272-9138-f99709370657
adjust logical starting sector to physical starting sector after the check
number of blocks is already adjusted from physical to logical
don't panic anymore when accessing the last part of storage
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26050 a1c6a512-1295-4272-9138-f99709370657
