Commit graph

181 commits

Author SHA1 Message Date
Rob Purchase
0b30eb79b1 Fix FS#10362 (flickering backlight when removing hold) by preventing multiple SYS_TIMEOUT events being posted the backlight thread.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23730 a1c6a512-1295-4272-9138-f99709370657
2009-11-23 23:30:55 +00:00
Rafaël Carré
89ccd5c145 Remove int_prio argument from timer_register, and move the only use for it into alpine_cdc plugin, since this plugin is only built on SH7034
Also remove it from TIMER_START()

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21558 a1c6a512-1295-4272-9138-f99709370657
2009-06-29 14:29:46 +00:00
Thomas Martitz
b2b3f39403 Remove an #ifdef SIMULATOR in favor of using a stub
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20853 a1c6a512-1295-4272-9138-f99709370657
2009-05-05 08:43:32 +00:00
Boris Gjenero
f4943b90e6 Fix another FS#10130 issue - Set backlight and button light brightness via the backlight thread to avoid potential concurrency issues.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20834 a1c6a512-1295-4272-9138-f99709370657
2009-05-01 03:18:20 +00:00
Thomas Martitz
14731bc3e2 Hopefully fix lcd_sleep() from not be being called for targets without fading at all and being and being called too early for backlight always of on PWM fading targets. Also, clean up the code a bit by renaming the function that initiates fading on PWM.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20820 a1c6a512-1295-4272-9138-f99709370657
2009-04-28 08:57:38 +00:00
Thomas Martitz
0a5beba823 Move the sim stubs into a seperate file to clean backlight.c up a bit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20796 a1c6a512-1295-4272-9138-f99709370657
2009-04-26 02:27:11 +00:00
Thomas Martitz
179ac1039b Remove two calls backlight_lcd_sleep_countdown() more, this time in backlight.c
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20795 a1c6a512-1295-4272-9138-f99709370657
2009-04-26 02:02:46 +00:00
Thomas Martitz
cbe67dcc9d Replace the condition with a more obvious function call, which is the same.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20794 a1c6a512-1295-4272-9138-f99709370657
2009-04-26 01:35:19 +00:00
Thomas Martitz
6abae1f124 Remove the calls to backlight_lcd_sleep_countdown from target specific code and move it into backlight.c
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20793 a1c6a512-1295-4272-9138-f99709370657
2009-04-26 01:23:39 +00:00
Thomas Martitz
c40af94d12 Remove the backlight tick task in favor of handling timeouts through a 1s timeout in the backlight thread.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20792 a1c6a512-1295-4272-9138-f99709370657
2009-04-26 00:47:35 +00:00
Thomas Martitz
5b316afcfd Restructure backlight timeout management a bit by factoring out the get_current_timeout code. No functional change.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20789 a1c6a512-1295-4272-9138-f99709370657
2009-04-25 21:11:16 +00:00
Thomas Martitz
7a4145c47a Fix red.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20785 a1c6a512-1295-4272-9138-f99709370657
2009-04-25 18:39:05 +00:00
Thomas Martitz
0017dfbe82 Rename _buttonlight_timeout and use a function call instead of extern'ing buttonlight_timeout to be more inline with backlight, and use a #define instead of a const variable for !HAVE_LCD_SLEEP_SETTING (no functional changes)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20784 a1c6a512-1295-4272-9138-f99709370657
2009-04-25 18:15:50 +00:00
Thomas Martitz
b056f0637c Add forgotton colon and fix red.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20779 a1c6a512-1295-4272-9138-f99709370657
2009-04-24 09:08:43 +00:00
Thomas Martitz
b0ac944364 Fix FS#10130 (Concurrent backlight function calls from backlight timeout settings menu) by ensuring that all calls of target-specific backlight code happen from backlight thread
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20778 a1c6a512-1295-4272-9138-f99709370657
2009-04-24 08:54:10 +00:00
Boris Gjenero
d50d1df817 FS#10129 - Start LCD sleep timer after PWM fadeout is complete
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20774 a1c6a512-1295-4272-9138-f99709370657
2009-04-21 21:49:29 +00:00
Jens Arnold
3e67e3b1f0 Add a rockbox kernel thread for simulator specific tasks, and use that for calling the screendump function(s). Fixes screendump in simulators for backlight-less targets (Ondio), and reduces mixing of unrelated functionality a bit (screendump was called from backlight thread, triggered by a sim-only system wide event).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20065 a1c6a512-1295-4272-9138-f99709370657
2009-02-20 17:13:08 +00:00
Jens Arnold
11ad7b4bc8 Move screendump from apps to firmware, solving two nasty firmware-to-apps calls. This required to move the filename creation functions as well. * Fix bug in the BMP header of Clip screendumps. * Add remote screendump for targets with an LCD remote. * Simplify some ifdefs and rename a macro in the sim.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19967 a1c6a512-1295-4272-9138-f99709370657
2009-02-10 23:43:37 +00:00
Thomas Martitz
12a0ed3b8d Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19860 a1c6a512-1295-4272-9138-f99709370657
2009-01-26 23:21:49 +00:00
Thomas Martitz
81df953da5 Rename software backlight fading files, as we don't call it thread fading. Correct a copyright info too.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19818 a1c6a512-1295-4272-9138-f99709370657
2009-01-22 10:50:11 +00:00
Michael Giacomelli
7278163087 Commit part 1 of FS#9663 by Thomas Martitz. Enables backlight fading on the Fuze and e200v2. Also removed a bit of dead code that was copied by accident into the fuze and e200v2 config files.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19791 a1c6a512-1295-4272-9138-f99709370657
2009-01-18 18:43:58 +00:00
Michael Sevakis
8cfbd3604f Use cookies for thread identification instead of pointers directly which gives a buffer against wrongly identifying a thread when the slot is recycled (which has been nagging me for awhile). A slot gets 255 uses before it repeats. Everything gets incompatible so a full update is required.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19377 a1c6a512-1295-4272-9138-f99709370657
2008-12-10 08:57:10 +00:00
Michael Sevakis
58eb784a5d Straighten out some powermanagement stuff. Give target complete control over how power inputs are sensed. Clean SIMULATOR stuff out of target files. Get rid of USB charging option on targets that don't support it or don't implement it yet. Menu string remains to avoid language incompatibility but should be removed on next cleanup for targets not using it (notice in english.lang). global_settings becomes incompatible for some builds and so plugin API version is incremented.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19315 a1c6a512-1295-4272-9138-f99709370657
2008-12-03 19:54:25 +00:00
Steve Bavin
b70f575023 Fix reds. Also note my r19221 commit message had a typo - shoudld have been e200/c200, not e100.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19224 a1c6a512-1295-4272-9138-f99709370657
2008-11-26 10:21:03 +00:00
Steve Bavin
f684726580 Add software backlight fading for E100/H300/X5/D2, by Thomas Martitz and others - see FS#6800 for credits.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19221 a1c6a512-1295-4272-9138-f99709370657
2008-11-26 08:26:13 +00:00
Bertrik Sikken
1a904eb1eb Revert v18522 for firmware/backlight.c, it breaks a couple of bootloaders
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18523 a1c6a512-1295-4272-9138-f99709370657
2008-09-15 20:01:07 +00:00
Bertrik Sikken
f13184e472 Fix some more #includes
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18522 a1c6a512-1295-4272-9138-f99709370657
2008-09-15 19:50:55 +00:00
Daniel Stenberg
2acc0ac542 Updated our source code header to explicitly mention that we are GPL v2 or
later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657
2008-06-28 18:10:04 +00:00
Michael Sevakis
955d889a15 Oops. Left a couple things in a bad state when using fading.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17515 a1c6a512-1295-4272-9138-f99709370657
2008-05-14 21:29:43 +00:00
Michael Sevakis
009cebeab2 Straigten-out lcd sleeping on Gigabeat F/X. Add a service function to backlight.c to handle lcd sleep timer. Make HAVE_LCD_SLEEP useable without a setting and use HAVE_LCD_SLEEP_SETTING when a setting is available in addition to HCD_HAVE_SLEEP. If a setting isn't used, the target must define the timeout to be used in the config.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17505 a1c6a512-1295-4272-9138-f99709370657
2008-05-14 19:29:25 +00:00
Michael Sevakis
80278e45aa Bring Gigabeat S bootloader one step close to a release version.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17442 a1c6a512-1295-4272-9138-f99709370657
2008-05-10 18:00:11 +00:00
Jens Arnold
94c6e6f337 1st/2nd Gen: Make backlight inversion adaption in the greyscale library work again. is_backlight_on() can now be called from COP.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16988 a1c6a512-1295-4272-9138-f99709370657
2008-04-06 15:15:44 +00:00
Jens Arnold
ac9b92716a Allow to select the core for running the user timer on portalplayer targets. * Incompatible plugin API change -> sorted API.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16965 a1c6a512-1295-4272-9138-f99709370657
2008-04-04 19:38:46 +00:00
Jens Arnold
d5f37b2235 Ooops, overlooked the no-backlight stubs...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16937 a1c6a512-1295-4272-9138-f99709370657
2008-04-02 22:28:08 +00:00
Jens Arnold
5c87a98b97 Greyscale library: * Implement linearisation curve flipping for 1st/2nd Gen iPods (LCD is inverted when backlight is on, so the curve is also inverted). This needs a slight extension of is_backlight_on() functionality in the core. * Thorough recalibration of all reachable greyscale targets, and #ifdef cleanup. * Reduce on-target gamma a bit, because the displayable contrast range of a monochrome/greyscale isn't that high.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16936 a1c6a512-1295-4272-9138-f99709370657
2008-04-02 22:16:14 +00:00
Jens Arnold
1f4bcc86da Revert accidental tree commit. /me needs a smaller enter key...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16805 a1c6a512-1295-4272-9138-f99709370657
2008-03-25 19:57:23 +00:00
Jens Arnold
9a7978aeab Cabbiev2 gigabeat background: reduce WPS backdrop filesize by storing it as 24 bit BMP instead of unnecessary 32 bit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16802 a1c6a512-1295-4272-9138-f99709370657
2008-03-25 19:43:08 +00:00
Jens Arnold
8e66491ffe M3: Make remote LCD hotplug work, and make 'backlight on button hold' use the correct hold switch. * Kill a warning.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16711 a1c6a512-1295-4272-9138-f99709370657
2008-03-19 00:34:56 +00:00
Michael Giacomelli
2d8cd814ac Increase backlight priority to the same level as UI so that there is no longer a long delay when activating it during heavy CPU load.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16543 a1c6a512-1295-4272-9138-f99709370657
2008-03-07 00:51:36 +00:00
Jens Arnold
09a786138c Allow (almost) arbitrary backlight fade in and fade out times (on targets with software PWM fading), and comvert the associated settings to table settings. * Settings system: Unify a bunch of formatters and getlang helpers.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15817 a1c6a512-1295-4272-9138-f99709370657
2007-11-26 23:10:20 +00:00
Jens Arnold
d490f44112 New way of handling integer settings with variable steps: table settings (FS #8186, with fixes by me). This allows to get rid of those synchronised tables in firmware/ and apps/, making things more flexible and less error prone. First application: backlight timeouts. * Make some more things 'const'.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15803 a1c6a512-1295-4272-9138-f99709370657
2007-11-25 17:36:21 +00:00
Jens Arnold
ef12b3b5c6 Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15599 a1c6a512-1295-4272-9138-f99709370657
2007-11-12 18:49:53 +00:00
Michael Sevakis
84f5c5c3e3 Take out some NOCACHEBSS_ATTR's that were accidentally left. Put some threading code in IRAM that should be there on PP502x.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15155 a1c6a512-1295-4272-9138-f99709370657
2007-10-16 22:00:51 +00:00
Michael Sevakis
a9b2fb5ee3 Finally full multicore support for PortalPlayer 502x targets with an eye towards the possibility of other types. All SVN targets the low-lag code to speed up blocking operations. Most files are modified here simple due to a name change to actually support a real event object and a param change to create_thread. Add some use of new features but just sit on things for a bit and leave full integration for later. Work will continue on to address size on sensitive targets and simplify things if possible. Any PP target having problems with SWP can easily be changed to sw corelocks with one #define change in config.h though only PP5020 has shown an issue and seems to work without any difficulties.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15134 a1c6a512-1295-4272-9138-f99709370657
2007-10-16 01:25:17 +00:00
Jens Arnold
5f1ec307db Name all button light functions and variables consistently starting with buttonlight_ .
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15016 a1c6a512-1295-4272-9138-f99709370657
2007-10-07 15:02:02 +00:00
Michael Sevakis
7914e90738 Commit a subset of the dual core changes that have to do with cache handling, stacks, firmware startup and thread startup. Tested on e200, H10-20GB, iPod Color and 5.5G. Thread function return implemented for all targets. Some changes to plugins to follow shortly.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14879 a1c6a512-1295-4272-9138-f99709370657
2007-09-28 10:20:02 +00:00
Jens Arnold
f265ee9cd5 * Don't touch the backlight(s) (and buttonlight) at backlight init in order to avoid a short flash when the lights are both disabled in the bootloader and in rockbox settings. * Properly reflect the backlight state set by the 1st/2nd gen bootloader.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14679 a1c6a512-1295-4272-9138-f99709370657
2007-09-12 22:24:58 +00:00
Michael Sevakis
e847054e63 Fix a warning.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14647 a1c6a512-1295-4272-9138-f99709370657
2007-09-09 02:14:32 +00:00
Michael Sevakis
0107dfc827 UISIMULATOR: Give the host OS some needed context switching hints (which _is_ supposed to work on Linux - but I can't tell on VMWare - and does on Windows). I guess I'll know for sure soon. Give sleep() even more genuine behavior. Add some button driver sync with the rockbox threads that should have been there for some time - this is basically interrupt-like processing as any thread not in the kernel pool should be considered. Make the screendump work again by posting the request. Perhaps help out shutting down for some users but not in the way I'd prefer - to think about.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14646 a1c6a512-1295-4272-9138-f99709370657
2007-09-09 01:59:07 +00:00
Jens Arnold
671f5d4412 Removed special X5 backlight handling, and replaced it with a generic system that makes the backlight light up on shutdown and not time out unless it's completely disabled in the current player state.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14292 a1c6a512-1295-4272-9138-f99709370657
2007-08-12 11:18:52 +00:00