This is related to gdb, and gdb can only work on SH and ifp
This was mistakenly kept when app.lds was forked for each SoC
Side-effect: fix DEBUG builds when the rockbox binary is expected to
be loaded at the start of DRAM and there is no runtime relocation
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28124 a1c6a512-1295-4272-9138-f99709370657
IN & OUT interrupts have not much in common so move each to its own
function
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28043 a1c6a512-1295-4272-9138-f99709370657
- reorder members (largest members first)
- int status -> int8_t status (we only use 0 or -1)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28042 a1c6a512-1295-4272-9138-f99709370657
- use a single table to store endpoints numbers (1 table by direction)
- drop __ prefix since the table isn't meant to be hidden (it is used in
reset_endpoints()
- the tables won't change at runtime: mark const
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28038 a1c6a512-1295-4272-9138-f99709370657
set status to failure before signaling usb_drv_send_nonblocking() in
reset_endpoints()
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28037 a1c6a512-1295-4272-9138-f99709370657
Use ep0_setup_pkt as a pointer
Fix comment for CGU_USB clk source
Remove comment about physical address, the macro handles that for us
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28035 a1c6a512-1295-4272-9138-f99709370657
Since we'll receive data from DMA in this buffer we don't need to write-back
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28032 a1c6a512-1295-4272-9138-f99709370657
- don't use *_dcache_range() on uncached memory
- remove unused struct endpoint->buffer
- use correct *_dcache_range() in usb_drv_transfer() for each direction
- halve FIFO size
sometimes mounts / sometimes fails
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28031 a1c6a512-1295-4272-9138-f99709370657
- implement request_endpoint
- setup nextep chain for in endpoints
- remove useless dcache operation on IN transfer completion
- fix transfers to use correct max packet size
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28028 a1c6a512-1295-4272-9138-f99709370657
- use uncached address to access setup packet
- implement driver exit
- stop forcing full speed
- change fifo sizes on init
- don't call invalid_dache() on setup packet because it makes everything fail
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28027 a1c6a512-1295-4272-9138-f99709370657
FCLK is unused because we use fastbus clocking: CPU clock = PCLK
Base PCLK off PLLA and use the lowest frqeuency for FCLK (24MHz source,
maximum divider)
Save a bit of power, adjust Clipv1/e200v2/Fuzev1 current usage accordingly
Note: the power saving (in mA) is a bit less on e200v2/Fuzev1 than on Clipv1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28000 a1c6a512-1295-4272-9138-f99709370657
- change buffer alignement to 32 bytes (not sure if it's useful)
- flush rx fifo on reset
- use AS3525_PHYSICAL_ADDR for DMA
- reset endpoints structure states on reset
- force full speed for debugging purpose
- add more debugging code
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27986 a1c6a512-1295-4272-9138-f99709370657
Without this change the backlight would be enabled but the screen would
show the last content displayed before the screen went off
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27957 a1c6a512-1295-4272-9138-f99709370657
The driver is stable so we can use error codes for debugging
Fix 2 problems in error code path:
- release sd mutex
- release dma module when needed
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27915 a1c6a512-1295-4272-9138-f99709370657
fix DMA buffers when the src/dst is in IRAM
It worked fine because all the buffers are in DRAM, and the virtual
address happens to be the physical address
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27876 a1c6a512-1295-4272-9138-f99709370657
(USB stack is not used by default)
This makes debugging the USB driver easier
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27847 a1c6a512-1295-4272-9138-f99709370657
Users will have to reboot to OF manually or to power off, and then plug USB
No message is displayed because usb_detect() is run from a tick
This lacks documentation but should be OK for Unstable devices, and
will hopefully prevent clueless users from opening their devices and
breaking them definitely, instead of waiting for the battery to power
off.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27837 a1c6a512-1295-4272-9138-f99709370657
