Robert Kukla
c865a9b41d
m:robe 100 - correct headphone detection
...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16653 a1c6a512-1295-4272-9138-f99709370657
2008-03-13 17:27:14 +00:00
Robert Kukla
d6c23b4dd4
m:robe 100:
...
- don't compile touchpad driver for bootloader
- honour hold switch
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16531 a1c6a512-1295-4272-9138-f99709370657
2008-03-05 21:52:45 +00:00
Mark Arigo
d829075a00
Driver for the Synaptics touchpad on the m:robe 100 based on the 3-wire interface spec. Needs some tweaking as it's too sensitive with the default hardware settings. For now, the vertical strip is divided into up/select/down buttons. Also, redo the keymap (using the Gigabeat as a starting point), but it still needs a good bit of work.
...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16400 a1c6a512-1295-4272-9138-f99709370657
2008-02-24 04:12:16 +00:00
Robert Kukla
12cc3cc47c
mrobe 100:
...
- temporarily disable shutdown on low power
- enable power button for minimal interaction (not shutdown yet)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16049 a1c6a512-1295-4272-9138-f99709370657
2008-01-10 21:51:44 +00:00
Mark Arigo
e66ddd754f
Initial commit for the Olympus m:robe 100 port (PP5020). The LCD driver works. The ADC driver was copied from the H10 port (they can probably be combined later), but the battery readings aren't right and it shuts down. The touch pad buttons do not work. Install the bootloader and rockbox the H10 way. Still lots of work to do.
...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16030 a1c6a512-1295-4272-9138-f99709370657
2008-01-09 07:24:43 +00:00
