I'm currently running up against the limitations of the lcd_draw functions
I want these functions to be able to be used on any size buffer not
just buffers with a stride matching the underlying device
[DONE] allow the framebuffer to be decoupled from the device framebuffer
[DONE need examples] allow for some simple blit like transformations
[DONE] remove the device framebuffer from the plugin api
[DONE}ditto remote framebuffer
[DONE] remove _viewport_get_framebuffer you can call struct *vp = lcd_set_viewport(NULL) and vp->buffer->fb_ptr
while remote lcds may compile (and work in the sim) its not been tested on targets
[FIXED] backdrops need work to be screen agnostic
[FIXED] screen statusbar is not being combined into the main viewport correctly yet
[FIXED] screen elements are displayed incorrectly after switch to void*
[FIXED] core didn't restore proper viewport on splash etc.
[NEEDS TESTING] remote lcd garbled data
[FIXED] osd lib garbled screen on bmp_part
[FIXED] grey_set_vp needs to return old viewport like lcd_set_viewport
[FIXED] Viewport update now handles viewports with differing buffers/strides by copying to the main buffer
[FIXED] splash on top of WPS leaves old framebuffer data (doesn't redraw)
[UPDATE] refined this a bit more to have clear_viewport set the clean bit and have skin_render do its own screen clear
scrolling viewports no longer trigger wps refresh
also fixed a bug where guisyncyesno was displaying and then disappearing
[ADDED!] New LCD macros that allow you to create properly size frame buffers in you desired size without wasting bytes
(LCD_ and LCD_REMOTE_)
LCD_STRIDE(w, h) same as STRIDE_MAIN
LCD_FBSTRIDE(w, h) returns target specific stride for a buffer W x H
LCD_NBELEMS(w, h) returns the number of fb_data sized elemenst needed for a buffer W x H
LCD_NATIVE_STRIDE(s) conversion between rockbox native vertical and lcd native stride (2bitH)
test_viewports.c has an example of usage
[FIXED!!] 2bit targets don't respect non-native strides
[FIXED] Few define snags
Change-Id: I0d04c3834e464eca84a5a715743a297a0cefd0af
open_plugin allows arbitrary plugins to be called
in hotkey and start screen
replaces PictureFlow Integration
shortcuts menu plays plugins now too
rather than store paths and parameters in the settings
that reside in memory instead entries in a file are searched by hash.
after all, the plugin has to be loaded from disk anyways
----------------------------------------------------------------------------
shortcut_viewer.rock-- can now call plugins rather than taking you to them
in the browser
-----------------------------------------------------------------------------
Added a new option to menus:
F_CB_ON_SELECT_ONLY
instead of option callback every time a item is accessed
F_CB_ON_SELECT_ONLY fires callback only when item is selected
-----------------------------------------------------------------------------
Added manual entries
-----------------------------------------------------------------------------
Change-Id: I078b57b1d2b4dd633c89212c1082fcbc1b516e6a
First I discovered a bug in the code to display the currently playing
album from the WPS
--on a NULL id3->albumartist field PF would crash
now checks for a match in id3->albumartist and then id3->artist
if neither exists then the search uses <untagged>
ditto for album
The album index feature (recently added) did not check for enough
room in the buffer on restore
--save and restore code cleaned up a bit
moved all buffers to their own struct
tracks with no title now show filename rather than <UNTAGGED>
Reworked album search function
album search was going quadriatic resulting in some outrageous
index build times [40mins+ for 4000 albums]
building now done in stages and duplicates removed at end
*MUCH FASTER*
Album art
empty album art is no longer stored in the art cache
PF will now allow you to cancel building album art without
forcing a rebuild next run,
it will continue searching for album art in the background
album art is now updated in the background on each start as well
tracklist now rolls over at the end
artist_index is now discarded after album_index is created
Cleaned up some of the myriad of global variables
Added quit prompt for index building
Added sanity checking for album_index loaded from disk
Change-Id: I8494cb7abcb1ae8645c223fc3c11dc0ee749883a
The name buffer is using too much ram for some targets
will revisit later...
removed extraneous call to set_scrol_lline
Change-Id: I56d658149bcb0c50857d25924e37bcb46a612c75
- Extra data structure to store artist info.
- Create_album_index modified to perform a different query.
- Added load and save functions to store the data index in HDD.
- Album collisions fixed.
- New config options to perform rescans.
- Extra fields added to lang files: english and spanish.
Update CREDITS
Change-Id: I31814b38d8b4e7fa4b65f5e6e51aa5f00d271ece
(A lot of work was done on this thing, for a target that hasn't been compileable
at least since we moved to git..)
Change-Id: Ibface9392f3251b5be4bf1e0c4d12639c4f1662d
Cleaned up, rebased, and forward-ported from the xvortex fork.
(original credit to vsoftster@gmail.com)
Change-Id: Ibcc023a0271ea81e901450a88317708c2683236d
Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
seems more logical to me, and is more consistent, since
"SAMSUNG_YH92X_PAD" is already used in the tex files.
Change-Id: Ie9a9d850ea86155a7dcf86c88a22a420a10a3837
The main "innovation" in this patch are two "virtual buttons"
for the record switch on YH92x targets. When the switch state
changes, a single BUTTON_REC_SW_ON or .._OFF button event will
be generated. Thus keymap code can react on switching, but
not on the actual state of the switch.
Wherever sensible, the following user scheme is applied:
- use PLAY as confirm button
- use REW button or Long REW to exit
- use REC (YH820) or FFWD (YH92X) as modifier key for button combos
Change-Id: Ic8d1db9cc6869daed8dda98990dfdf7f6fd5d5a1
It's not needed as picture flow has it's own buffer.
This reverts commit 9076b433d1.
Detailed explanation from Thomas Martiz (thanks!):
buflib buffers can be passed to yielding functions just fine. Problems
only arise if the are concurrent allocations, for example if two threads
allocate from the same context simultaneously or if the callee does it's
own allocations. This can't happen in the pictureflow case, it has it's
own context and a single thread allocating from it.
Therefore the problem isn't yield() itself, but possible concurrent
buflib_alloc() calls that result from the thread switch. This is because
compaction only ever happens on allocation (and not in a backgroud
thread or so).
If we don't provide a callback to buflib_alloc(),
the buffer is always movable (to reduce fragmentation).
Since we pass our buffer to functions that call yield(),
this could lead to memory corruption on buflib compaction.
Change-Id: Id1fad1822479d692551c55cb8bc87cea7b78f759
With LCD driver all calculation will be performed on RGB888 and the hardware/OS
can display from our 24bit framebuffer.
It is not yet as performance optimized as the existing drivers but should be
good enough.The vast number of small changes is due to the fact that
fb_data can be a struct type now, while most of the code expected a scalar type.
lcd-as-memframe ASM code does not work with 24bit currently so the with 24bit
it enforces the generic C code.
All plugins are ported over. Except for rockpaint. It uses so much memory that
it wouldnt fit into the 512k plugin buffer anymore (patches welcome).
Change-Id: Ibb1964545028ce0d8ff9833ccc3ab66be3ee0754
Although both players basically have the same keys, the
differences in the layout is rather big, so I think both
deserve their own keymaps.
(On the yh820 the FFWD/PLAY/REW buttons are located above the
direction keys, on the yh920 at the side of the player.
Furthermore the yh920/925 has a REC switch, whereas
yh820 has a push button.)
Change-Id: I0e62a1b101c387646c0bdb07ea142d9d2430ca15
Reviewed-on: http://gerrit.rockbox.org/814
Reviewed-by: Szymon Dziok <b0hoon@o2.pl>
This patch completes the plugin keymaps for the Zen X-Fi3 and enables those plugins for compilation.
One key was changed in "button-target.h" for compatibility with Rockboy.
This also caused the changes to "keymap-zenxfi3.c", to keep the stock functionality (no further changes in here).
Change-Id: Ic222faf89e9a9a2332a49d6e532cedb6eb16d3d7
Reviewed-on: http://gerrit.rockbox.org/762
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
This complements offset-based resume and playback start funcionality.
The implementation is global on both HWCODEC and SWCODEC.
Basically, if either the specified elapsed or offset are non-zero,
it indicates a mid-track resume.
To resume by time only, set elapsed to nonzero and offset to zero.
To resume by offset only, set offset to nonzero and elapsed to zero.
Which one the codec uses and which has priority is up to the codec;
however, using an elapsed time covers more cases:
* Codecs not able to use an offset such as VGM or other atomic
formats
* Starting playback at a nonzero elapsed time from a source that
contains no offset, such as a cuesheet
The change re-versions pretty much everything from tagcache to nvram.
Change-Id: Ic7aebb24e99a03ae99585c5e236eba960d163f38
Reviewed-on: http://gerrit.rockbox.org/516
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested: Michael Sevakis <jethead71@rockbox.org>
* Enhance allocation function comments to better state the return value and what an invalid value is
* Change clients to check for "< 0" instead of "<= 0" or "== 0"
* Return -1 or -2 depending on the exact failure in buflib_alloc_ex.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30469 a1c6a512-1295-4272-9138-f99709370657
buflib_get_data() isn't inlined for plugins anymore, but can be if really needed.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30387 a1c6a512-1295-4272-9138-f99709370657
The problem r26713 addressed was not caused by missing yields but by too high
priority of the background loader thread. Undoing the yield() change and decreasing
the priority fixes the audio drop as well but doesn't cause jerkiness.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30000 a1c6a512-1295-4272-9138-f99709370657
* Add backlight_force_on() which forces to turn on backlight even when the setting is set to Off. use this in lamp.
No functional change except lamp.
See aslo FS#9883.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29128 a1c6a512-1295-4272-9138-f99709370657
do not save settings when it is not so needed.
make sliding animation better when you press right then left quickly.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28529 a1c6a512-1295-4272-9138-f99709370657
implement scroll engine in the plugin similar to the one in core.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28474 a1c6a512-1295-4272-9138-f99709370657
-fix calculation of track_list_y when the display area isn't filled with tracks.
-reset scroll position of album title text when the text is changed so that it doesn't jump.
-enables theme in the menu so that it is consistent to playback control item and
other plugins' menu, instead of solid color background from the theme.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28209 a1c6a512-1295-4272-9138-f99709370657
-use upper case for enum constants.
-rename variables to match it's use.
-remove tabs and fix indents.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28192 a1c6a512-1295-4272-9138-f99709370657
It handles exit() properly, calling the handler also when the plugin returns
normally (also make exit() more standard compliant while at it).
It also holds PLUGIN_HEADER, so that it doesn't need to be in each plugin anymore.
To work better together with callbacks passed to rb->default_event_handler_ex() introduce exit_on_usb() which will call the exit handler before showing the usb screen and exit() after it.
In most cases rb->default_event_handler_ex() was passed a callback which was manually called at all other return points. This can now be done via atexit().
In future plugin_crt0.c could also handle clearing bss, initializing iram and more.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27873 a1c6a512-1295-4272-9138-f99709370657
It handles exit() properly, calling the handler also when the plugin returns
normally (also it makes exit() more standard compliant while at it).
It also holds PLUGIN_HEADER, so that it doesn't need to be in each plugin anymore.
To work better together with callbacks passed to rb->default_event_handler_ex introduce exit_on_usb() which will call the exit handler before showing the usb screen and exit() after it.
In most cases it was passed a callback which was manually called at all other return points. This can now be done via atexit().
In future plugin_crt0.c could also handle clearing bss, initializing iram and more.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27862 a1c6a512-1295-4272-9138-f99709370657
SIMVER was really only used to detect a simulator build. With APP_TYPE you can
now differentiate between simulator, application, checkwps and database builds.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27372 a1c6a512-1295-4272-9138-f99709370657
