Also move the definition to config.h
Change-Id: I36bb5020c5e06b2344292bc05e8c13ccc7a6a1ff
Reviewed-on: http://gerrit.rockbox.org/234
Reviewed-by: Nils Wallménius <nils@rockbox.org>
* Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application)
to break powermgmt.c's assumption about the ability to read battery voltage.
There's now additionally percentage (android) and remaining time measure
(maemo). No measure at all also works (sdl app). If voltage can't be measured,
then battery_level() is king and it'll be used for power_history and runtime
estimation.
* Implement target's API in the simulator, i.e. _battery_voltage(), so it
doesn't need to implement it's own powermgmt.c and other stubs. Now
the sim behaves much more like a native target, although it still
changes the simulated battery voltage quickly,
* Other changes include include renaming battery_adc_voltage() to
_battery_voltage(), for consistency with the new target functions and
making some of the apps code aware that voltage and runtime estimation
is not always available.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657
This will help debugging, and can be disabled for releases if needed
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31226 a1c6a512-1295-4272-9138-f99709370657
Fix problems with volume of recorded material by converting 14-bit samples to
16-bit. Remove duplicate samples from recorded data and support proper
samplerate since ADC runs 1/2 the codec clock. Support monitoring mono on both
output channels by feeding data manually to I2SOUT under the right conditions.
DMA is no longer used for recording since frames must be processed as described
above but it does allow full-duplex audio.
Miscellaneous change includes a proper constant (HW_SAMPR_DEFAULT) to reset the
hardware samplerate when recording is closed. PP5024 and AS3525 have different
default recording rates (22kHz and 44kHz respectively) but both have half-speed
ADC.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31180 a1c6a512-1295-4272-9138-f99709370657
The previous maximum (20) still causes excessive heat for some people, and measurements (using a digital camera and a white screen) show that the maximum brightness in the OF corresponds to 12 in rockbox, so we use 12 now.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30227 a1c6a512-1295-4272-9138-f99709370657
AMS*: define CURRENT_MAX_CHG to give more correct estimation of recharge time
The amount of current each target draws from the charger is defined in
powermgmt-target.h
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27994 a1c6a512-1295-4272-9138-f99709370657
Gets a bit more battery life
Adjust current usage, it was a bit too low for Clipv2/Clip+
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26866 a1c6a512-1295-4272-9138-f99709370657
A specific poweroff function needs to be used for wake-up to work
Disable RTC in bootloaders for consistency with other Sansas
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26243 a1c6a512-1295-4272-9138-f99709370657
build it on fuzev2 and clipv2 too, it should be the same controller
as3525v1 file is only build for CONFIG_USBOTG == USBOTG_AS3525, no need
to check for it in the .c file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26142 a1c6a512-1295-4272-9138-f99709370657
When the rest of the code is confirmed to work properly without CPU
frequency changes, it will be possible to reliabily test set_cpu_frequency()
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25924 a1c6a512-1295-4272-9138-f99709370657
Move scrollwheel parsing function into separate file as it's reused.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25425 a1c6a512-1295-4272-9138-f99709370657
Instead of modifying CGU_PROC to get 24MHz pclk, just switch to fastbus else Clip+ wouldn't boot
Tested on fuzev1/Clip+
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25413 a1c6a512-1295-4272-9138-f99709370657
Add HAVE_AS3543 config define to differentiate the bits changed since as3514/as3517
Enable recording on Fuzev2/Clipv2/Clip+, although it was tested on Clip+ only
Note: storage is still read-only so I tested by listening to headphones loopback and watching the recording level in recscreen
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25390 a1c6a512-1295-4272-9138-f99709370657
correct USB product ID
remove a define which is common to all as3525v2 and then built-in in the driver
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25367 a1c6a512-1295-4272-9138-f99709370657
- buttonlight works
- backlight turns on (quite weak though and no brightness adjustment/backlight off functional)
- don't share drivers with e200v2/fuzev1 for now as it's not entirely clear how dbop plays into this
- deactivte scrollwheel as it's messing up the timer setup in kernel-as3525.c indicating the dbop input reading doesn't work well
- still no working bootloader/no lcd or buttons
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25225 a1c6a512-1295-4272-9138-f99709370657
CGU_PROC looks different from as3525v1 and there have been reports of
Clip+ becoming warm when boosted
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25020 a1c6a512-1295-4272-9138-f99709370657
Compilation shows a warning for the first argument of the lcd_bitmap() call in show_logo().
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24911 a1c6a512-1295-4272-9138-f99709370657
