Instead implement a bit of battery monitoring. Currently it only fetches the battery level (in %) every 30s,
but it could do more like battery status, charger connected, voltage...
Theoretically, we could also exit/quit after some time of inactivity too
(perhaps not a bad idea since Rockbox puts a slight but still non-zero CPU load even if doing nothing).
Ironically, Rockbox is now the only way to get the exact battery level (at least I haven't found anything yet) on my phone :-)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27974 a1c6a512-1295-4272-9138-f99709370657
pretent the file (fonts, wps, etc.)was in the installation dir (it'll still be loaded from the user dir).
This way the behavior is the same for files in the installation dir and in the user config dir.
This is needed because we historically only store the basename of the file at runtime and don't
support writing these to config.cfg if they're outside of the rockbox dir.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27720 a1c6a512-1295-4272-9138-f99709370657
Remove unneeded restriction from set_file that prevented filename settings to
work if they were outside of ROCKBOX_DIR.
Add the get_user_file_path() call to a few further places where it was
forgotten.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27667 a1c6a512-1295-4272-9138-f99709370657
For RaaA it evaluates user paths at runtime. For everything but codecs/plugins it will give the path under $HOME/.config/rockbox.org if write access is needed or if the file/folder in question exists there (otherwise it gives /usr/local/share/rockbox).
This allows for installing themes under $HOME as well as having config.cfg and other important files there while installing the application (and default themes) under /usr/local.
On the DAPs it's a no-op, returing /.rockbox directly.
Not converted to use get_user_file_path() are plugins themselves, because RaaA doesn't build plugins yet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27656 a1c6a512-1295-4272-9138-f99709370657
The simulator defines PLATFORM_HOSTED, as RaaA will do (RaaA will not define SIMULATOR).
The new define is to (de-)select code to compile on hosted platforms generally.
Should be no functional change to targets or the simulator.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27019 a1c6a512-1295-4272-9138-f99709370657
It's now easier to force rebuild of files depending on the svn revision
version.c/version.h are generated once with new tools/genversion.sh
Changes in the VCS are still not auto detected, so you'll have to remove
builddir/version.* if you want to change the string in your binaries
APPSVERSION is now called RBVERSION and is defined in the generated
header instead of being defined by the Makefiles
appsversion is now called rbversion (the plugin api number didn't change
since old modules are still binary compatible)
Change some bootloaders to use knwon-at-buildtime RBVERSION instead of
"%s" + rbversion
You'll need to run make clean to regenerate dependencies after the
removal of apps/version.h
To build binaries with a different version string, hand-edit
tools/version.sh or tools/genversion.sh (which calls the former)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26320 a1c6a512-1295-4272-9138-f99709370657
This is to a) to cleanup firmware/common and firmware/include a bit, but also b) for Rockbox as an application which should use the host system's c library and headers, separating makes it easy to exclude our files from the build.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25850 a1c6a512-1295-4272-9138-f99709370657
Select (B)ootchart in advanced options in configure, and logf will record timings for various stages of boot, for performance comparisons. Format logged is:
BC:>function_name,123,80
where 123 is the line number, 80 is the number of ticks since boot. This can be loaded as CSV into a spreadsheet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25426 a1c6a512-1295-4272-9138-f99709370657
What this also does is remove a bunch of unnecessary settings_Apply()'s from the ipod accessory code, and causes all non-skin settings to get applied each time (this includes font and langs which we wernt doing to stop disk access)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24922 a1c6a512-1295-4272-9138-f99709370657
1) seperate UI font for the remote and main displays
2) allow individual skins to load additional fonts for use in the skin (Uo to 7 extra in this first version) see CustomWPS for info on how to load a font in the skins.
Code should always use FONT_UI+screen_number to get the correct user font
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24644 a1c6a512-1295-4272-9138-f99709370657
- simplify the setting/skin relationship. settings are used as the fallback if it's not specified in the skin
- backdrop buffers are now in the skin buffer (which has also increased slightly to accomodate 1 backdrop for each skin and 2 full colour screens for bmps (up for 1.5))
- if no %X is specified in a skin then the backdrop setting will be used. use %Xd to explicitly disable a skin from displaying a backdrop
- the base skin can now specify a backdrop.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24366 a1c6a512-1295-4272-9138-f99709370657
* viewport_set_current_vp() because if a screen wants to not use the user setting it shouldn't be dealing with the viewport manager at all (other than to disable the bars)
* viewport_ui_vp_get_state() is unused (and not needed)
* viewport_get_current_vp() because you should be using set_defaults() instead.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23606 a1c6a512-1295-4272-9138-f99709370657
Fixing it because correcting the event api prototypes causes many warnings.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23301 a1c6a512-1295-4272-9138-f99709370657
The custom statusbar can be used as a WPS for the main UI, using .(r)sbs files. It's using the skin engine and knows all tags the WPS also knows.
The default folder for .sbs is the wps folder to reuse images used in the WPS.
As it can be shown in the WPS also, it's useful to move shared parts to the custom statusbar in order to save skin buffer space.
There are a few restrictions/TODOs:
*) Peak meter doesn't redraw nicely(not frequent enough), as very frequent updates would slow the UI down as hell (some targets fight with it in the WPS already: FS#10686)
*) No touchregion support as the statusbar doesn't have any action handling (it won't fail to parse though).
*) Drawing stuff into the default VP is forbidden (loading images in it is not). You *need* to use viewports for the displaying stuff (parsing fails if no viewport is used).
*) Themes that don't use a custom ui viewport can be fixed up using the new %Vi tag to avoid nasty redraw effectts (you must not draw into it as well, it's used to fix up the ui viewport). %Vi describes the viewport that the lists can use without getting in the way of the statusbar.
Otherwise, it behaves like the classic statusbar, it can be configured in the theme settings, and can be turned off in the wps using %wd.
Note to translaters: When translating LANG_STATUSBAR_CUSTOM, please consider using the same translation as for LANG_CHANNEL_CUSTOM if it's compatible. They could be combined later then.
Flyspray: FS#10566
Author: myself
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23258 a1c6a512-1295-4272-9138-f99709370657
As these are called when parsing a skin it doesn't need to be called by the wps or settings, so make it local to skin_parser.c.
Reorder the members of struct wps_data for more effecient alignment.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23171 a1c6a512-1295-4272-9138-f99709370657
- Revert renaming of button_set_flip()
- Moved rtl flipping logic to apps/actions.c as a static function
- Joined rtl_button_flip_needed() and button_flip_horizontally()
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22962 a1c6a512-1295-4272-9138-f99709370657
