NOTE: this commit does not introduce any change, ideally even the binary should
be almost the same. I checked the disassembly by hand and there are only a few
differences here and there, mostly the compiler decides to compile very close
expressions slightly differently. I tried to run the new code on several targets
to make sure and saw no difference.
The major syntax changes of the new headers are as follows:
- BF_{WR,SET,CLR} are now superpowerful and allows to set several fileds at once:
BF_WR(reg, field1(value1), field2(value2), ...)
- BF_CS (use like BF_WR) does a write to reg_CLR and then reg_SET instead of RMW
- there is no more need for macros like BF_{WR_,SET,CLR}_V, since one can simply
BF_WR with field_V(name)
- the old BF_SETV macro has no trivial equivalent and is replaced with its
its equivalent for BF_WR(reg_SET, ...)
I also rename the register headers: "regs/regs-x.h" -> "regs/x.h" to avoid the
redundant "regs".
Final note: the registers were generated using the following command:
./headergen_v2 -g imx -o ../../firmware/target/arm/imx233/regs/ desc/regs-stmp3{600,700,780}.xml
Change-Id: I7485e8b4315a0929a8edb63e7fa1edcaa54b1edc
Factorise pin setup, rewrite PIO code, add support for lcdif irq,
handle all the various differences between the stmps, drop yuv
blitting code since it already exists in the common lcd drivers.
Change-Id: Ifc40aed9b3b12f16611ce960602e46a5bc87ae53
When chaging the cpu and memory frequency we need to disable the
external memory interface (EMI) for a small time. This can
underflow the dma and cause some breakage. Hopefully the SSP
controller handles this gracefully by stopping the clock and the
I2C probably handles this naturally because the clock can be
streched anyway. However the LCDIF has a special setting for this
which needs to be enable, otherwise it will send garbage to the
LCD. No other block is known to suffer from this currently but
this issue might have more unexpected consequences.
Change-Id: Ide154cad87929f2bf6cc419ac1d2ff33e30eec66
fuze+: reset the controller for all lcd types, should fix the "CRT effet"
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31234 a1c6a512-1295-4272-9138-f99709370657
