Commit graph

27 commits

Author SHA1 Message Date
Solomon Peachy
a8aa8403ad samsungyp: Enable recording feature. No idea if it works. :D
Change-Id: I48952f0551aaf1023f084e0be18354970d2492ed
2020-10-23 17:49:07 -04:00
Solomon Peachy
6a94f1e995 sonynwz: Properly support multidrive, with hotswap of the SD card
Change-Id: I7eb8efb0986a395d5ffbcc06a54bb680e0b59e9d
2020-10-18 10:19:42 -04:00
Solomon Peachy
012908e064 hosted: Fix HAVE_MULTIDRIVE to work properly with PIVOT_ROOT
Change-Id: Ibc97de5c345e88c19ad8ba8c05fefebbada08790
2020-10-17 17:10:52 -04:00
Solomon Peachy
db6f21e295 hosted: sanitize handling of HOME_DIR
* HOME_DIR is now either "/" or special "<HOME>"
   * target-specific "home dir path" is defined solely by PIVOT_ROOT
 * PIVOT_ROOT path is now defined in toplevel config files
 * Make Samsung YP-R0/R1 and SONY_NWZ use PIVOT_ROOT too
 * Do not prepend PIVOT_ROOT path if the path already has it!
 * Do not play these games for __PCTOOL__ builds

Change-Id: I3d51ad902a5f9cafe45ba15ba654f30f1ec6113a
2020-10-11 17:47:34 -04:00
Solomon Peachy
658026e626 [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice.
Note:  I left behind lcd_bitmap in features.txt, because removing it
would require considerable work in the manual and the translations.

Change-Id: Ia8ca7761f610d9332a0d22a7d189775fb15ec88a
2020-07-24 21:20:13 +00:00
Solomon Peachy
8cb555460f [3/4] Completely remove HWCODEC support
'swcodec' is now always set (and recording_swcodec for recording-capable
units) in feature.txt so the manual and language strings don't need to
all be fixed up.

Change-Id: Ib2c9d5d157af8d33653e2d4b4a12881b9aa6ddb0
2020-07-24 21:20:13 +00:00
Lorenzo Miori
6879dec6ec yp-r0: improve the charging code
Some people reported strange charging times and
strange battery life.
Charging by OF: 25 hours; RB: 18 hours
It has been found that there are at least two issues here:

1) the way of getting battery charging status wasn't
really accurate. This attempts to fix that issue.
This patch also simplifies some code (opening a
device is no more needed, for example).

To technically explain, battery charging implies first a constant
current mode (where the voltage increases) and then a constant
voltage mode (where, obviously, the voltage reads more or less
the same). The old way the End Of Charge was detected was based solely
on the voltage, while now it is based on chip's EOC interrupt,
which should be more accurate.

2) OF explicitly sets a constant current 350 mA, while we usually had
55 mA (by as3543 default).
This wasn't discovered before since there is a caching problem
("an accurate guess") in the Samsung power mgmt Linux module,
thus its debugging dumper wasn't really working, reporting a 55 mA current.
Strangely this option should have been set by the bootloader
but apparently it does not.

Some testing is still needed, but I confirm that with this patch
I could run a benchmark for 25 hours (vs. 18 hours), by charging
within Rockbox of course.

Change-Id: I3bd921e86b9018d1cc3c720d15cc46896e8490b3
2015-01-29 20:28:07 +01:00
Thomas Martitz
cd4fb9ee79 fix sdlapp and ypr0 builds
Change-Id: I3953350c04607691b427fc2a3b00e8ae08bcea45
2014-06-23 23:47:25 +02:00
Thomas Martitz
a1842c04f9 lcd-24bit: Introduce a 24-bit mid-level LCD driver
With LCD driver all calculation will be performed on RGB888 and the hardware/OS
can display from our 24bit framebuffer.

It is not yet as performance optimized as the existing drivers but should be
good enough.The vast number of small changes is due to the fact that
fb_data can be a struct type now, while most of the code expected a scalar type.

lcd-as-memframe ASM code does not work with 24bit currently so the with 24bit
it enforces the generic C code.

All plugins are ported over. Except for rockpaint. It uses so much memory that
it wouldnt fit into the 512k plugin buffer anymore (patches welcome).

Change-Id: Ibb1964545028ce0d8ff9833ccc3ab66be3ee0754
2014-06-21 00:15:53 +02:00
Thomas Martitz
62524237f0 Implement lcd_get_dpi() for all bitmap targets.
DPI values are autogenerated from the resolution and collected display size
values. These values are inserted as comments as well.

Change-Id: Id03aedf9af18348f773dfce002805e480f6751e8
2014-03-03 15:14:15 +01:00
Thomas Martitz
f6c26d33a4 samsungypr0: Support or mounting the microsd
A thread polls the appropriate GPIO pin for sd card presence and mounts
using the mount system call.

Change-Id: I31ab41c4120f4af64eb6998b7e7b6f9051585efb
2014-02-23 20:23:52 +01:00
Thomas Martitz
77f19f75eb storage: Add STORAGE_HOSTFS
CONFIG_STORAGE & STORAGE_HOSTFS allows to use parts of the storage_* API to be
compiled for application targets without compiling storage.c or performing
actually raw storage access. This is primarily to enable application targets to
implement HAVE_MULTIVOMULE/HAVE_HOTSWAP (in a later commit).

SIMULATOR uses the same mechanism without explicitely defining STORAGE_HOSTFS
(how to add a bit to an existing preprocessor token?).

Change-Id: Ib3f8ee0d5231e2ed21ff00842d51e32bc4fc7292
2014-02-23 20:23:51 +01:00
Lorenzo Miori
9a8ed6ba35 Simulator for Samsung YP-R0
Enable simulator for the target ypr0 to
be built and used.

Change-Id: I1b080f07ab90f5c4856881d08ad70e1053bbb0c0
Reviewed-on: http://gerrit.rockbox.org/618
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
2013-09-29 14:15:48 +02:00
Lorenzo Miori
2f9e3cae2c Samsung YP-R0 LCD improvements
This patch adds to YP-R0 (and other future targets using Linux
framebuffer) the ability to use LCD_ENABLE to save some CPU cycles
while display is powered off.
This patch also changes the way to toggle LCD power: now using
a proper ioctl call, slightly more efficient.

Change-Id: I544de77f5abd4ac1c13d3fe3a6e40a30f7c0bece
Reviewed-on: http://gerrit.rockbox.org/410
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
2013-03-06 23:23:52 +01:00
Lorenzo Miori
60592165ca Samsung YP-R0 hosted target code refactoring
As per title this patch aims at splitting common target
code and specific target code in a better way to
support future ports within the same environment
(e.g. Samsung YP-R1 where the Linux and the SoC
are the same, with differences in hardware devices
handling)

Change-Id: I67b4918c46403b184d3d8f42ab5aae7d01037fd0
Reviewed-on: http://gerrit.rockbox.org/409
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
2013-03-06 00:21:22 +01:00
Lorenzo Miori
d2875fc773 This patch adds RDS capability to Samsung YP-R0 target.
Uses register polling method to decide when it's time to decode
RDS packets.

Change-Id: I1d3cc995ea3350ec7b101438b8f2027130d4a4c9
Reviewed-on: http://gerrit.rockbox.org/320
Reviewed-by: Lorenzo Miori <memorys60@gmail.com>
Tested-by: Lorenzo Miori <memorys60@gmail.com>
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
2012-10-06 23:00:36 +02:00
Frank Gevaerts
0c3934f917 Use RGB565 define instead of plain 565.
Pixelformats should always use the defines, not the raw values.

Change-Id: Id60a73385bb6cc4e8f8d1f8b292489d066f1e13f
2012-06-20 01:13:51 +02:00
Lorenzo Miori
3cad5573b6 ypr0: This patch adds radio support to Samsung YP-R0
Basically it uses the default SI4700 radio chip driver, the only thing that's different is the I2C access,
written specifically to interact with my kernel module.
Next things to add are:
- RDS support!

Change-Id: I0ed125641e00f93124d7a34f90dd508e7f1db5a4
Signed-off-by: Lorenzo Miori <memorys60@gmail.com>
2012-05-28 19:39:14 +02:00
Nils Wallménius
d29a11b7a8 Rename HAVE_PITCHSCREEN to HAVE_PITCHCONTROL
Also move the definition to config.h

Change-Id: I36bb5020c5e06b2344292bc05e8c13ccc7a6a1ff
Reviewed-on: http://gerrit.rockbox.org/234
Reviewed-by: Nils Wallménius <nils@rockbox.org>
2012-05-09 14:32:38 +02:00
Frank Gevaerts
a16b65e47d Force YPR0 to 240x320
The YPR0 has a fixed screen size. Letting the generic RaaA screen
size selection code work on causes checkwps/buildall.sh to build
broken checkwps binaries. There's no good reason to allow
overriding the screen size here

Change-Id: Ic666d28d10273000a8c1867580c8d1a13dd98dc9
2012-02-22 01:08:17 +01:00
Rafaël Carré
b5e879e837 TARGET_TREE is not needed anymore
spotted by jhMikeS

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31597 a1c6a512-1295-4272-9138-f99709370657
2012-01-07 17:14:40 +00:00
Thomas Martitz
c1bd9b0361 Rework powermgmt to enable code re-use on appliation and sims.
* Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application)
to break powermgmt.c's assumption about the ability to read battery voltage.
There's now additionally percentage (android) and remaining time measure
(maemo). No measure at all also works (sdl app). If voltage can't be measured,
then battery_level() is king and it'll be used for power_history and runtime
estimation.

* Implement target's API in the simulator, i.e. _battery_voltage(), so it
doesn't need to implement it's own powermgmt.c and other stubs. Now
the sim behaves much more like a native target, although it still
changes the simulated battery voltage quickly,

* Other changes include include renaming battery_adc_voltage() to
_battery_voltage(), for consistency with the new target functions and
making some of the apps code aware that voltage and runtime estimation
is not always available.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657
2012-01-03 23:44:38 +00:00
Thomas Martitz
c08ce1b829 ypr0: Enable headphone detection
Author: Lorenzo Miori
Flyspray: FS#12348

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31544 a1c6a512-1295-4272-9138-f99709370657
2012-01-03 21:15:27 +00:00
Thomas Martitz
de6c203b53 ypr0: Tiny cleanup in ypr0 config file.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31522 a1c6a512-1295-4272-9138-f99709370657
2012-01-02 14:11:28 +00:00
Thomas Martitz
81aac5ac1a ypr0: Proper current values measured with battery_bench.
The battery benches were done by Lorenzo Miori, thus credits to him
for this and r31472.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31521 a1c6a512-1295-4272-9138-f99709370657
2012-01-02 14:11:24 +00:00
Thomas Martitz
05f12e0877 ypr0: Enable battery voltage read-out, charging monitoring and charger detection.
Voltage can be read using as3543 adc (i.e. ascodec api, on this target implemented
via ioctl()). TODO: Look into possibly controlling charging more by re-using
powermgmt-ascodec.c. However, charging seems to be controlled by the kernel,
so may not be needed.

Charger state can be read using /dev/minivet. It allows to differentiate between
wall charger and usb charging, but that's not implemented (is it even worthwhile?)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31470 a1c6a512-1295-4272-9138-f99709370657
2011-12-31 13:34:56 +00:00
Thomas Martitz
b8197aa3a6 ypr0: Rename ypr0.h to match naming scheme.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31418 a1c6a512-1295-4272-9138-f99709370657
2011-12-24 13:09:19 +00:00
Renamed from firmware/export/config/ypr0.h (Browse further)