Thomas Martitz
|
dfb24d6cee
|
CONFIG_BACKLIGHT_FADING is always defined, so better ask for BACKLIGHT_NO_FADING.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20850 a1c6a512-1295-4272-9138-f99709370657
|
2009-05-04 12:04:29 +00:00 |
|
Karl Kurbjun
|
f9fae86de2
|
M:Robe 500: Add backlight cleanups and fix power management so that dangerous and shutoff voltages are taken care of, carge discharge curves are better modeled.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20849 a1c6a512-1295-4272-9138-f99709370657
|
2009-05-04 04:14:52 +00:00 |
|
Karl Kurbjun
|
fe2319372a
|
M:Robe 500 - Fix some of the Keymaps, touchscreen improvements to decrease inacurate reads, add support for dynamic frequency (was running at 87.5 MHz, now it runs at 175 MHz when boosted), disable clock to unneded modules (decreased power by 20 mA), LCD turnoff now works without graphic glitches, battery ADC read now returns scaled voltage, define backlight fading
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20846 a1c6a512-1295-4272-9138-f99709370657
|
2009-05-02 23:25:55 +00:00 |
|
Karl Kurbjun
|
57ca7ccf36
|
M:Robe 500: Rearrage TSC2100 reads to make touchscreen more reliable, add hack to get lcd_sleep working/called again, fix the panic handler so that it waits for the power button to be pressed instead of freezing the player
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20818 a1c6a512-1295-4272-9138-f99709370657
|
2009-04-28 05:07:25 +00:00 |
|
Thomas Martitz
|
6abae1f124
|
Remove the calls to backlight_lcd_sleep_countdown from target specific code and move it into backlight.c
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20793 a1c6a512-1295-4272-9138-f99709370657
|
2009-04-26 01:23:39 +00:00 |
|
Karl Kurbjun
|
bf37ecb6b8
|
M:Robe 500 fix the backlight brightness setting.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20709 a1c6a512-1295-4272-9138-f99709370657
|
2009-04-15 05:31:04 +00:00 |
|
Karl Kurbjun
|
4fa96fbc91
|
M:Robe 500i: More LCD initialization, and beginnings of support for QVGA as well as VGA on the LCD. MPEGPlayer now works with reasonable performance on smaller videos, but YUV blitting persists after MPEGPlayer is left, some cleanup/changes to the initialization code. This should be functionally equivalent for the ZVM, but the #ifdef's may need to be added back for app.lds. Get the bootloader building again.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20598 a1c6a512-1295-4272-9138-f99709370657
|
2009-04-01 03:21:18 +00:00 |
|
Karl Kurbjun
|
9d1b99534e
|
Add support for powering down the LCD (saves 50 mA when disabled)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20547 a1c6a512-1295-4272-9138-f99709370657
|
2009-03-26 22:20:46 +00:00 |
|
Daniel Stenberg
|
2acc0ac542
|
Updated our source code header to explicitly mention that we are GPL v2 or
later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657
|
2008-06-28 18:10:04 +00:00 |
|
Jens Arnold
|
ef12b3b5c6
|
Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15599 a1c6a512-1295-4272-9138-f99709370657
|
2007-11-12 18:49:53 +00:00 |
|
Catalin Patulea
|
f57ea9acd7
|
m:robe 500i port: Add backlight support to the main build.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15404 a1c6a512-1295-4272-9138-f99709370657
|
2007-11-02 06:13:43 +00:00 |
|
Jonathan Gordon
|
80f1688423
|
I got bullied in IRC by linuxstb and markun...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14909 a1c6a512-1295-4272-9138-f99709370657
|
2007-09-30 08:57:49 +00:00 |
|