This commit adds the necessary code in the dualboot stub (bootloader) to
let rockbox control the boot process. In particular, rockbox can now choose
if the next boot will be normal (boot rockbox or OF on magic key), to OF
or to updater.
The intents (to be added in follow-up commits) are:
1) Let the user more easily reboot to the OF. On some targets it is not trivial,
especially in USB mode.
2) Automatically reboot to updater when the user drop firmware.sb at the root
of the drive (currently, the user needs to do that in OF USB mode)
3) Document this OF magic
Change-Id: I86df651dec048c318c6a22de74abb8c6b41aa9ad
They did not compile anymore after the register hearder rework. This change
only fixes the syntax, the generated binaries are exactly identical.
Change-Id: Iec2347aa3deb1ddfe2ca36f0db1e481c4e2d329c
During the bootloader install/uninstall process, a signal
is emitted when "Abort" button is pressed, the installers
can attach this signal and cancel the process.
Change-Id: I7f297b8031d7a2d93da0022081aaef03ef041baf
Useful for targets that needs multi-stage uninstall. On current
targets (with Uninstall capability) the progress is updated to
100% when bootloader uninstall is successfully finished.
Change-Id: I61be1c4f5cfc2d2f35fa5005962be9703888447d
This allows to implement multi-stage uninstallers. Should not affect
the behaviour on current targets.
Change-Id: Idf8aec5caf76cf9317798890d094a7cebdbcabec
Since the stub code is shared with NWZ-360, it enables the pullup for the
hold button, but the NWZ-370/380 doesn't have a hold button so don't compile
this code in, it could potentially have unexpected effets or increase consumption
Change-Id: I28c8aa40fc7f9373593ff105fb6df557a6f57ccd
Qt 5.6 on OS X requires targeting at least OS X 10.7, while for earlier
versions we can still target 10.6. Handle this case and inform the user about
the used target version.
Change-Id: I78e426037e2966241ab9a63105e04e7366b469ed
MPProcessors has been deprecated with 10.7. When targeting 10.7 (required when
building with Qt 5.6 on OS X) this causes a warning. Use Gestalt instead
(Gestalt has been deprecated with 10.8, but when targeting 10.7 this doesn't
cause a warning, and Gestalt is used for other values as well).
Change-Id: Iaf82147ad47115e228f5c08f8198a6a7e92102a3
Current clang on OS X suggests placing parens so add them
(-Wbitwise-op-parentheses enabled by default).
Change-Id: I31b49386aa184fe27f72f7f58909b97524d96f44
C++11 requires a space between literal and identifier. When compiling with Qt
5.6 on OS X C++11 support is automatically enabled, causing an error due to
this.
Change-Id: Ifbedc894a3cef23fc67ed1da75558e92e44d1077
QUrl::isLocalFile() is available starting with Qt 4.8. We can safely check for
a file:// url instead.
Qt 4.8 dropped support for OS X 10.4 / 10.5. Since we're still supporting those
we need to keep using Qt 4.7 on OS X. We might want to consider requiring at
least 10.6 on OS X with the next major release of Rockbox Utility.
Change-Id: I18998fe3c7a38773479bc7a1c32ca6e4966359e9
On case sensitive systems (i.e. Linux) uninstalling the bootloader could fail
when renaming the original bootloader file back. Fix this by using the
case-resolved filename.
Change-Id: I504656f70e7ccc7c0752f5252ddb14a625131f5b
Rework to return mapping between (filtered) process names and their pid values
(if running). Note that this functionality is not implemented for Linux (but as
it's mostly intended to detect Itunes currently not needed on that platform).
Change-Id: Ie348bfed46bda390f469c37635a96c75e5782616
Solves some eject issues (FSCTL_LOCK_VOLUMEN ioctl failures) ocurring
when resolveDevicename() is ejecuted prior to ejectDevice(), tested
with Qt5.
Change-Id: Iff9240abd9d2f71bec1a1070f4ef194916e13b65
Windows XP might use mixed case in hardware ID (VID / PID) string.
Cherry-picked from G#1221.
Change-Id: I86fa63e050cd9b9de5a1beac65b81028e0f86a9d
Signed-off-by: Dominik Riebeling <Dominik.Riebeling@gmail.com>
Make local HttpDaemon for testing use a random unused port instead of a fixed
one. Avoids possible issues with the port chosen already being used on the
local machine.
Change-Id: I1ca10b7e5ce198350e14321afc50c36d78b1c0b4
HttpGet::getFile() always returns the same value. Remove the return value since
it isn't necessary. Add some missing function documentation comments.
Change-Id: I1cee242211272a996437b10dbc8de791b3fc3d67
QNetworkAccessManager can handle file:// URLs without additional work. Make
HttpGet aware of that so you can now also use it to retrieve file:// URLs. Add
a unit test for it as well.
Change-Id: If64b57453460b70bca9e5b0c725bb78344617bcd
Qt5 uses a different name for the accessibility plugin. Cherry-picked from
G#1221.
Change-Id: If32eafa053a176ba24b4595826593023ed808164
Signed-off-by: Dominik Riebeling <Dominik.Riebeling@gmail.com>
Make sure to handle if retrieving the device description ends up with a NULL
data buffer pointer. Also switch handling the retrieved string using QString.
Fixes a crash reported in the forums.
Change-Id: I6e95a411308e85656cd78ddcecb1bcee165864d0
Windows doesn't have which, so building natively on Windows didn't create
translations anymore. Use a which-less approach instead.
Change-Id: I7b4c40b26d68da54277a148e8e2d76ac81061c8b
Check for lrelease and always try to run it if found. If not found show a
warning. This avoids build problems for certain setups which previously
required -config dbg to complete.
Change-Id: I60f0f49adc8455743afc5e4d23294ce0729f38d2
Update to latest quazip release. Note that quazip is now LGPL and not GPL /
LGPL dual licensed anymore.
Change-Id: Ie1e975b5b546dd31218eef9df472527493fe81e0
This loader is needed to use Rockbox on iBasso DX50/DX90 devices. It replaces
/system/bin/MangoPlayer.
It expects
- the original firmware MangoPlayer as /system/bin/MangoPlayer_original
- the chooser.bmp file as /system/chooser.bmp
- the rbmissing.bmp file as /system/rbmissing.bmp
- the usb.bmp file as /system/usb.bmp
- Rockbox in /mnt/sdcard/.rockbox/ (internal device storage accessable via USB)
On first boot or if the device is booted with the hold switch engaged (upper,
locked position) this loader will let the user choose between Rockbox and the
orginal firmware MangoPlayer. It remembers the last choice and will start the
choosen player an following boots.
In the chooser screen
- the device can be powered off with a power button long press.
- Rockbox can be startet with the "Next/Fast Forward" button or by touching the
right part of the touchscreen.
- the orginal firmware MangoPlayer can be startet with the "Previous/Rewind"
button or by touching the left part of the touchscreen.
If Rockbox can not be found/executed than a "Rockbox is missing" screen will be
shown and the orginal firmware MangoPlayer will be started after 30 seconds.
This loader will (try to) restart Rockbox or the orginal firmware MangoPlayer if
something unexpected happens.
This loader can be installed via a customized firmware image (update.img) or
manually via the Android Debug Bridge (if you get adbd started on the device).
This is a rewrite and code clean up of the original submission, eliminating the
need for a custom Android Vold. This loader "knows", when Rockbox has exited due
to a USB mass storage connection remounting /mnt/sdcard and acts accordingly,
displaying a "USB connection" screen while waiting to restart Rockbox.
Change-Id: I2698e173437f9c7aa1ff40649a290220e2ee0439
The port to for this two targets has been entirely developped by Ilia Sergachev (alias Il or xzcc). His source
can be found at https://bitbucket.org/isergachev/rockbox . The few necesary modifications for the DX90 port
was done by headwhacker form head-fi.org. Unfortunately i could not try out the final state of the DX90 port.
The port is hosted on android (without java) as standalone app. The official Firmware is required to run this port.
Ilia did modify the source files for the "android" target in the rockbox source to make the DX port work. The work I did
was to separate the code for DX50 (&DX90) from the android target.
On this Target Ilia used source from tinyalsa from AOSP. I did not touch that part of the code because I do not understand it.
What else I changed from Ilias sources besides the separation from the target "android":
* removed a dirty hack to keep backlight off
* changed value battery meter to voltage battery meter
* made all plugins compile (named target as "standalone") and added keymaps
* i added the graphics for the manual but did not do anything else for the manual yet
* minor optimizations
known bugs:
* timers are slowed donw when playback is active (tinyalsa related?)
* some minor bugs
Things to do:
* The main prolem will be how to install the app correctly. A guy called DOC2008 added a CWM (by androtab.info) to the
official firmware and Ilia made a CWM installation script and a dualboot selector (rbutils/ibassoboot, build with
ndk-build). We will have to find a way to install rockbox in a proper way without breaking any copyrights.
Maybe ADB is an option but it is not enable with OF by default. Patching the OF is probably the way to go.
* All the wiki and manual
to build:
needed: android ndk installed, android sdk installed with additional build-tools 19.1.0 installed
./tools/configure
select iBasso DX50 or iBasso DX90
make -j apk
the content of rockbox.zip/.rockbox needs to be copied to /system/rockbox/app_rockbox/rockbox/ (rockbox app not needed)
the content of libs/armeabi to /system/rockbox/lib/ (rockbox app needed)
The boot selector is needed as /system/bin/MangoPlayer and the iBasso app as /system/bin/MangoPlayer_original. There
is also the "vold" file. The one from OF does not work with DX50 rockbox (DX90 works!?), the one from Ilia is necessary.
Until we have found a proper way to install it, it can only be installed following the instructions of Ilia on his
bitbucket page, using the CWM-OF and his installation script package.
Change-Id: Ic4faaf84824c162aabcc08e492cee6e0068719d0
Reviewed-on: http://gerrit.rockbox.org/941
Tested: Chiwen Chang <rock1104.tw@yahoo.com.tw>
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
With current MinGW using c99 as standard the compiler causes problems with some
types. Use gnu99 standard instead which doesn't do this.
Change-Id: I731f58025645ae88ac226593a2b2a62140285ee8
