The code was a mess with respect to soc handling: some code just plain copied
the SoC descriptor which are big objects, some was using indexes. The new soc
factor out everything in a few classes which hide these ugly details so that
descriptors are never copied.
Change-Id: I17af8b47f997a528b58221621389d42d24fded93
A SoC descriptor is not a small object: it can be as large as ~100KiB so
it's better to avoid copying things over.
Change-Id: I1ef862e1260299cdaa0c4d2822ac45968713498a
zenxfi2: add support for internal storage on the SD version
The code can now skip devices marked as PROBE if they fail to init, thus
making it possible to handle various kinds of internal storages. The current
code probably doesn't interplay nicely since it acquires pins and never
release them so it will probably break NAND code when it's ready but NAND code
is not ready yet anyway.
Change-Id: I4cb962de4215661e521743a3f511445dbbf28673
The current code does hazardous tweaks to the power subsystem: indeed if one
boots with USB plugged and some stub powers on the DCDC switch, it will fail.
Indeed, a hardware bug prevents from going back to linear regulators (see
errata) so we cannot expect to reach a known state (linreg on, dcdc off)
on each configuration and in particular, powering down the 4p2 rail in
such a configuration will result in a power brownout.
This commit works around this issue by not touching the initial power
configuration until USB is (un)plugged, which are the best spots to get
known states.
Change-Id: I8741a3995df8ae61ca1c887a3ecb7903d0ac5136
In most devices, the button ladder is not actually derived from VDDIO but
from a constant voltage source, making it very easy to read it. However on
some devices like ther ZEN X-Fi Style, the ladder is wired to VDDIO we
can be changed so it's crucial that the button driver correctly scales the
values wrt VDDIO.
Change-Id: Ifc11abe2838fa7d16d0d60ecd96964a8dc5ea6d7
This commit add the very handy feature of being able to read registers
directly from a device using hwstub. This is mostly trivial using the hwstub
library and the biggest change here is actually:
- being able to read registers by name and/or addresses
- being able to enumerate devives
The UI code currently doesn't handle hotplug but the backend does so it should
be trivial to add in the future. It also opens up the possibility the write
registers from hwstub or save the register values to a file.
Since it relies on both hwstub and libusb, a switch has been introduced in
qmake to disable it (use -config nohwstub).
Change-Id: I5d7d7a2a7c97ecd7407227357c8553c2773ea6cc
In might be useful to load hwstub in an environment with the MMU active,
in which case care must be taken on the order in which things are done.
Mostly, one should not disable the MMU before moving stuff around. The code
assumes the linking address (0 currently) is identity mapped.
Change-Id: I8d54ce9e8cadcde2e08990353ca7a46803731ca7
The protocol has evolved a lot during the 2.x.y lifetime, bringing more
features which later got unused. This commit removes all the unused stuff
and simplifies everything:
- drop the feature mask: everything is mandatory or stalled on error
- remove the info request and put all static information in standard USB
descriptors which are part of the configuration descriptor (and can be
retrieved using the standard GetDescriptor request).
- remove the USB interface, we had only one anyway
- remove all endpoint descriptors
- remove the exit/atexit stuff, it never worked as intended anyway
- update the hwstub library and make it able to handle any device
- update the tools (mostly renaming and removing of code)
Change-Id: I1872bba7f4177fc3891180e8f944aab88f5bde31
The hardware watchdog automatically shutdown the device after 10s of
inactivity, being defined as 10s without the tick IRQ fired (aka braindead
device).
The software IRQ mechanism is more interesting: it uses a very high priority
timer setup as one-shot to trigger after 5s of inactivity (but IRQ still
enabled). When detected, it patches the running code to insert a SWI
instruction so that on interrupt return it will trigger a SWI and produce
a meaningfull backtrace to debug the deadlock. This should allow to debug
freezes in IRQ context.
Change-Id: Ic55dad01201676bfb6dd79e78e535c6707cb88e6
Rewrite IRQ handling to allow nested IRQs: on each IRQ entry, we save the
parameters on the (IRQ) stack and then switch to SVC mode (with its own
stack) and renable interrupts. Make sure interrupt is properly acknowledged
by using the read side-effect (RSE) mode and handle priority levels as well.
Change-Id: I3fd68289b430c56bdd256868939238ff268e42b4
This test software setups timer T0 periodic interrupt.
In ISR it changes backlight level. The interrupt handler
does not support nesting and the whole ISR is run in interrupt
context. Exceptions are not handled yet.
Change-Id: Idc5d622991c7257b4577448d8be08ddd1c24c745
Windows will try to retrieve such a descriptor on first connect.
If the device returns STALL or a regular string descriptor (i.e.
not one that follows the Microsoft OS Descriptor spec), things
will continue normally.
Unfortunately some of our low-level USB drivers have issues with
STALL so any other valid descriptor is the next best solution.
Change-Id: I59eb09eea157e4e14bec0197a898be378a5559f2
Reviewed-on: http://gerrit.rockbox.org/680
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
Tested: Frank Gevaerts <frank@gevaerts.be>
This patch includes some refactoring:
- renaming according to Rockbox guidelines
- GPIO code merging, still with target defines
- some simplification in firmware/SOURCES
Change-Id: I7fd95aece53f40efdf8caac22348376615795431
This is the basic port to the new target Samsung
YP-R1, which runs on a similar platform as YP-R0.
Port is usable, although there are still
some optimizations that have to be done.
Change-Id: If83a8e386369e413581753780c159026d9e41f04
The getty service mointors /dev/ttyGS0 (also created by the patched firmware).
When the g_serial.ko module is loaded this automatically enables shell access
via usb. It exposes a cdc-acm device to the host which is compatible to linux
(usb_serial.ko) and windows.
The g_serial.ko is not included module can be build from the YP-R0 open source
package provided by samsung. It can be loaded via rc.user on the internal memory.
Change-Id: I4903a635fd2e2f0ce6f5e91589a31d72bba2776b
Even though the DMA buffer itself does not move the ISR copies from a movable
buffer into the static commit buffer. To ensure this copying yields consistent
data it must not be interrupted by this ISR..
Also bump the commit buffer size to 2k, this should reduce the overhead
considerably because many clips are smaller than that (especially on
swcodec/speex).
Change-Id: I4e1ab83074f31fc91b51a58baa1df55ce659ac73
The voice engine can now request more voice data during decoding, it does
not require the entire clip to be available before start of decoding anymore.
Therefore the commit buffer does not need to hold an entire voice clip anymore,
and can be made greatly smaller.
Change-Id: I3eca9026448e725b9b8d0dae1efca0ad185371da
This unifies the talk.c for all possible voice payload. .talk clips are placed
onto the same unified clip cache, along with normal clips. This allows for more
effecient memory usage.
The cache handling makes a slight difference between normal clips and .talk
ones: .talk clips can be cached multiple and are always freed first.The extra
logic to avoid loading multiple copies of .talks is not necessary because the
will be freed first anyway.
Change-Id: I88d056a0a613b129f5875f50fdb757b58bac0a42
This unifies the talk.c for all targets. The only separation is left is
TALK_PROGRESSIVE_LOAD: When this is defined the talk buffer will not be
initially prefilled. This is useful for super slow storage or when the buffer
is not large enough to prefill it with useful clips (the prefill code could
be made smarter too).
The buffer size can be adjusted. By default lowmem uses 100k while
other targets load the entire file. The bigger the more clips can be cached
but with diminishing returns.
Change-Id: Ife38fb101c53093117e6638c40c65f7d177a31d4
Previously the clip cache of TALK_PARTIAL_LOAD reserved space N clips, each slot
was as big as the maximum sized clip which was necessary to replace clips
in-memory in MRU-style.
The cache management now uses buflib to allocate and free each clip, using the
clip's real size. This allows the clip cache to be much more compact, because
no space is wasted for the max. sized clip. This makes use of buflib's ability
to easily manage differently-sized memory chunks by moving them to make free
space.
As an example: for english.voice TALK_PARTIAL_LOAD allocated 288k in advance.
for just 64 clips. With this patch ~70 clips can be stored in a 100k buffer.
This, the memory usage is cut by 2/3 and almost optimal (there's still the
buflib per-alloc cookie overhead).
As a result the TALK_PARTIAL_LOAD buffer is restricted to 100k which still
allows for more clips than previously, on average.
Change-Id: I257654071e9a95770cd6db2c2765f020befce412
This is necessary because when voice is active audio is disabled. But only
audio was able to shrink it's buffer to let other memory allocs succeed.
talk needs to be able to do this too when it owns the audio buffer exclusively.
Change-Id: Idea8ab90da7169f977c0c766cccb42c4fe6d6e81
talk_init() is called by settings_apply() already which is called on boot.
Doing it again means loading the voicefile a second time which isn't necessary.
Change-Id: I4decd16401e63bf87338d3163c99d06d69fe3a3c
This allows buflib clients to more accurately estimate the total memory usage.
It's still not 100% accurate because the handle table grows in blocks, thus
buflib might use more memory that caused by allocations directly.
Change-Id: I68338bb94f510ad188fcb588aebf895b5f9197c5
These 256K are intended to account for the binary size which reduces the total
available RAM on native targets. 256K is really outdated though, 768K should be
more accurate (for the majority of targets).
Change-Id: Iab3ee51d42ae15b1b7efb8588881579cf1948ae7
