Replace QProcess::pid() which has been replaced with
QProcess::processId() starting with Qt5.3 and removed from Qt6.
Change-Id: I9b2d38f8e490e2e4c0afb5cbb409f6a17a98efbd
This uses the toggle bit method referenced in the datasheets for the
supported ROM chips and moves the code to a reusable subroutine. It
also introduces a short delay to give the bus a chance to recover. The
older ROM datasheet doesn't mention this delay as necessary but the
newer one does so it now does this for both.
Change-Id: Ie9dc8833bbd3ee545072b0c724ab220d13208d3d
Basically setting a null buffer is valid but it must be selected
into a screen to initialize to the default buffer
I wrongly assumed screen type wouldn't matter but since I decided to
reference backdrops directly to the default buffer
(since they are saved as an offset from what it later assumes to be the
default framebuffer)
SCREEN_MAIN/SCREEN_REMOTE are not longer optional
Change-Id: I8a8afbbe1e3ed0bfe6abd40ce287638e9fc6da60
Pretty subtle problem; looks like the skin core was relying on a
destructor to actually help initialize things.
Change-Id: Ieb4b9e4f11377dec7be61d13759590fc5f4bc921
* arm failures in lua, wolf3d, quake, flac
* m68k failures in lua, wmapro
* mips ???
I still think that most of these are actually due to latent bugs or
ambiguous code.
Change-Id: I4c9751d2b5c7a66253b313bfbc75fcd721b118d6
Basically we're overflowing IRAM by 48 bytes. Shrink the stack
by 48 bytes to compensate.
Fixing this properly will require careful decisions about what
(code and/or data) to eject from IRAM.
Change-Id: Ia3054280bcbd9813b9cce83f16ba4fbd15085110
And size elements horizaontally based on SYSFONT_WIDTH
Unfortunately we need 16px icons to make 16px statusbar look right
but at least it _works_ properly now.
Also: all targets currently use 8-px SYSFONT, except some hosted bootloaders
Change-Id: I0cdf97e6ef47ec49693ef79667b200595b4fe075
I'm currently running up against the limitations of the lcd_draw functions
I want these functions to be able to be used on any size buffer not
just buffers with a stride matching the underlying device
[DONE] allow the framebuffer to be decoupled from the device framebuffer
[DONE need examples] allow for some simple blit like transformations
[DONE] remove the device framebuffer from the plugin api
[DONE}ditto remote framebuffer
[DONE] remove _viewport_get_framebuffer you can call struct *vp = lcd_set_viewport(NULL) and vp->buffer->fb_ptr
while remote lcds may compile (and work in the sim) its not been tested on targets
[FIXED] backdrops need work to be screen agnostic
[FIXED] screen statusbar is not being combined into the main viewport correctly yet
[FIXED] screen elements are displayed incorrectly after switch to void*
[FIXED] core didn't restore proper viewport on splash etc.
[NEEDS TESTING] remote lcd garbled data
[FIXED] osd lib garbled screen on bmp_part
[FIXED] grey_set_vp needs to return old viewport like lcd_set_viewport
[FIXED] Viewport update now handles viewports with differing buffers/strides by copying to the main buffer
[FIXED] splash on top of WPS leaves old framebuffer data (doesn't redraw)
[UPDATE] refined this a bit more to have clear_viewport set the clean bit and have skin_render do its own screen clear
scrolling viewports no longer trigger wps refresh
also fixed a bug where guisyncyesno was displaying and then disappearing
[ADDED!] New LCD macros that allow you to create properly size frame buffers in you desired size without wasting bytes
(LCD_ and LCD_REMOTE_)
LCD_STRIDE(w, h) same as STRIDE_MAIN
LCD_FBSTRIDE(w, h) returns target specific stride for a buffer W x H
LCD_NBELEMS(w, h) returns the number of fb_data sized elemenst needed for a buffer W x H
LCD_NATIVE_STRIDE(s) conversion between rockbox native vertical and lcd native stride (2bitH)
test_viewports.c has an example of usage
[FIXED!!] 2bit targets don't respect non-native strides
[FIXED] Few define snags
Change-Id: I0d04c3834e464eca84a5a715743a297a0cefd0af
eg with numdecimals=1, a value of "-300" actually means "-30.0" So
divide it down appropriately, and only display the whole integer
portion.
Change-Id: I62927d2e64b224f3c11640b9bb9e84d60dbde34b
It was originally hard-coded at 0x200 which is 512 sectors. This
only works for the H100 and H120. The larger ROM of the H300 is 1024
sectors in size. In either case the bootloader starts 16 sectors before
the end of the ROM so rely on this fact to correctly calculate where to
stop the bootloader erasure.
Change-Id: Iec4112ebf24379f80a7bf1363035e005c434907e
In short, the display fading back in after a pause resuming interferes
with the audio codec, causing BadThings(tm) that cannot be recovered from
This really is just avoiding a known trigger; there's no guarantee this
condition won't occur under random circumstances during normal use,
and there's no good way to work around this from within rockbox.
I suspect the underlying problem is that both the display control and
codec control share an i2c bus, but the kernel drivers implementing them
isn't using proper linux bus access/locking.
Change-Id: Id4f56f9cb269ed74aac2f041146b3630cef09030
This also modifies the configuration file to include macros
defined in the H100 / H120 implementation.
Change-Id: Iae845889c98661ec548c04fc57e733dcc346c0f1
The new icons have no alpha channel thus these are being removed
in favor of the old icons (that have alpha and match the rest of the set too)
This reverts commit 326b7a5c0c.
Change-Id: I110725b0a2b705856da194cfb7edf21dd255936e
REMOVED FROM ALL NATIVE BOOTLOADERS:
finish removing the text scrolling
pare down printf to a minimal subset (%c %s %l %d %u and %x(%p))
remove diacritic and rtl language support
GOAL 134000
START 135305
CURRENT 133700
SUCCESS! (ASSUMING IT WORKS -- UNESTED)
Change-Id: Ic3f6ac1dc260578f581ee53458b3e5bb47d313ec
* Get rid of non-async (ie tick task) mode due to inherent brokenness
* Get rid of nonblock mode; we never write if buffers aren't sufficient
* Move driver init into pcm_open() instead of pcm_init()
* Much better underrun handling
* Better error handling in some situations
* Add in recording functionality
* Use smaller audio buffers to avoid glitching
* Don't start audio buffer with silence
* Allow device name to be overridden by target
Recording portions based on work done by Lorenzo Miori in g#633
Change-Id: I0197bdc1749c28109eb79def1e6a3e1d62d8cef3
at 1 GHZ the intermediate calculation for cycles overflows 32 bits
this makes timer fail even with sensible values
solution divide both sides by 100
Change-Id: I18a4054c2d06fb72531d5496bba562f71b03984f
