Might as well rename spi_enable_module to spi_enable_node for consistency
as well so long as I'm being picky.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31442 a1c6a512-1295-4272-9138-f99709370657
Unify spi_enable/disable_module into one spi_enable_module call for API
consistency's sake with I2C driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31441 a1c6a512-1295-4272-9138-f99709370657
HOME_DIR is intended for not-so-advanced files which shall be user
visible, and thus not in /.rockbox. Therefore HOME_DIR is translated
to $HOME on RaaA, /sdcard on android, the internal memory on ypr0
and "/" on native targets.
ROCKBOX_DIR ("/.rockbox") already existed as special and is translated
to whatever the real rockbox dir is on the target (e.g. /sdcard/rockbox
on android), but it's not suitable for some files we generate
(e.g. battery-bench.txt).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31430 a1c6a512-1295-4272-9138-f99709370657
It's now using completely the same driver as Sansa daps.
This also increases the volume range.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31428 a1c6a512-1295-4272-9138-f99709370657
DEBUG_GIO allows users to set any GIO options (direction, output state). As this feature should be used only by experienced users it is compiled conditionally.
Raise I2C delay values since udelay() is now precise and previous values seems to be too low for some devices.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31421 a1c6a512-1295-4272-9138-f99709370657
This port is a hybrid native/RaaA port. It runs on a embedded linux system,
but is the only application. It therefore can implement lots of stuff that
native targets also implement, while leveraging the underlying linux kernel.
The port is quite advanced. User interface, audio playback, plugins work
mostly fine. Missing is e.g. power mangement and USB (see SamsungYPR0 wiki page).
Included in utils/ypr0tools are scripts and programs required to generate
a patched firmware. The patched firmware has the rootfs modified to load
Rockbox. It includes a early/safe USB mode.
This port needs a new toolchain, one that includes glibc headers and libraries.
rockboxdev.sh can generate it, but e.g. codesourcey and distro packages may
also work.
Most of the initial effort is done by Lorenzo Miori and others (on ABI),
including reverse engineering and patching of the original firmware,
initial drivers, and more. Big thanks to you.
Flyspray: FS#12348
Author: Lorenzo Miori, myself
Merry christmas to ypr0 owners! :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31415 a1c6a512-1295-4272-9138-f99709370657
On this player EMIF is needed for accessing NOR flash. Disabling it improves battery runtime by about 25 minutes.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31373 a1c6a512-1295-4272-9138-f99709370657
assigning a partially initialized structure (through casting) will
initialize members unspecified in the initialization
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31372 a1c6a512-1295-4272-9138-f99709370657
The new menu is very helpful on RaaA, but also shown in the sim. It shows
the process cpu usage, process' time stats (user,sys,real) and the cpu
frequency stats.
It uses a thread to sample the data, however the thread is not created
until the menu is visited for the first time.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31364 a1c6a512-1295-4272-9138-f99709370657
This improves battery runtime on Sansa Connect by approximately 40 minutes.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31358 a1c6a512-1295-4272-9138-f99709370657
This improves framerate update (when uboosted, approximate values) from 151 fps to 911 fps for whole screen update and from 432 fps to 3017 fps for quarter screen update.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31357 a1c6a512-1295-4272-9138-f99709370657
Nick some aspects from the as3525 ascodec driver to improve throughput in
the beast's SPI communications by switching tranfer descriptors to the
caller's stack and getting rid of thread synchronization.
Fix a bug that suddenly became obvious that could permanently stall the SPI
driver because all data could be shifted out before the interrupt could get
serviced. In that case, it needs a kick to restart it. Should probably put
the SPI interrupt priority above DVFS.
A tweak to the event registration interface to simplify it.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31353 a1c6a512-1295-4272-9138-f99709370657
This adds wildcards to accept section names created by -ffunction-sections
and -fdata-sections. It should now be possible to build all targets with
those switches. Other wildcards such as those in r31337 and r31338 are only
needed when things are explicitly put into those sectons.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31352 a1c6a512-1295-4272-9138-f99709370657
Vectors are needed by the CPU, but they don't need to be accessed by Rockbox.
Without the KEEP(), they can be removed when liking with --gc-sections,
creating a broken binary without any warnings. This tells the linker to not
remove them. It should enable use of --gc-sections for all targets. When not
using --gc-sections, this does not change the binary.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31351 a1c6a512-1295-4272-9138-f99709370657
