Check the correct image when looking for the Ipod firmware version. On nano2g
this is a different image.
Change-Id: Ic7981363399d44e03247a81277522bc1d271090a
The Quick Start tab turned out to be used a lot but not explaining what its
functionality actually does, leading to various amount of confusion. The Quick
Start tab and its functionality have been completely removed.
As replacement the reworked Installation tab now includes both the entries from
the old Installation tab (Bootloader and Rockbox) and the Extras tab (Fonts,
Themes, Game files). Each of the items can be enabled or disabled individually,
and the selection is saved in the configuration. The only exception is the
bootloader option, since installing the bootloader is only needed once. To help
with this the bootloader checkbox is automatically enabled if no Rockbox
installation is found, and disabled if one is found. While it would be nicer to
check if the bootloader is actually installed this is not possible for various
players so the implementation simply relies on a Rockbox installation.
This should also make it much easier to update an existing installation.
Current limitations:
- the selected themes are not saved.
- it is not possible to detect if the target has the plugins that require
additional game files prior to installation. Thus the "Game files" option is
available for all targets but simply skipped if the plugins are not found.
Change-Id: I1929bb7045e382fcbba431cca057d3121607d3a9
After shrinking the size of the Rockbox logo shown and making the selected
device display two lines there is now enough room to also show an icon of the
player. The icon is scaled depending on the application font size, so for
setups configured with a larger font it still should show up in a reasonable
size.
Change-Id: I8f62f3292c62f820309157db73741b57fd6371ef
The "Installation" dialog allows backing up the current installation by
creating a zip file from the .rockbox folder since quite a while. However, this
has the drawback that you need to update your build to create a backup, but
creating a backup might be desireable in other cases as well (before updating
themes, or just for backup reasons). Since the functionality is somewhat hidden
it's also not obvious to users such a functionality exists (most users are
likely to use the "Quick Start" instead).
Implement backup functionality as dedicated dialog placed on the Uninstall tab.
Rename the Uninstall tab to accommodate this.
Change-Id: I1d2c6c8f646672d1b66bb442408fbfc2eeec700d
To identify the source for System Trace entries qDebug() calls usually add the
class name at the beginning. Add some missing ones and remove some trailing
spaces.
Change-Id: I3179bb206e96de8b5a1c05c0fc0958936e4513f3
When searching for the bootloader file in a zip archive the filename in the
archive might use a different casing than the one we're looking after. Make the
search case-insensitive to not fail to find the file in this case.
Change-Id: I05ffc67421e67fae045eabb7851cd99a3757b6d7
- Don't assume the list of release targets to be the same as the list of
release-candidate targets.
- Don't try to construct a download URL for releases with an empty release
version.
Change-Id: Icc3098a9db9e3d00261c32f4b9c2999ecc716380
The release-candiate entries provide both version and URL instead of only a
version entry and requiring the URL to be constructed separately. Since it's
easy to identify the format support both for release entries for improved
flexibility -- if the server URLs ever change the server only needs to get
updated to use the extended format.
Change-Id: If5c669b72d7acd6ac648c5f42dd844ae36904df6
Centralize creating the URLs so it's not duplicated in two places. This also
allows to change the representation on the server more easily, since it only
requires changes in one place.
Currently only changes URLs for Rockbox builds.
Change-Id: I87277cd61f8b164bdbcd914c9873d674661a786c
Save settings that haven't been and rename the configuration file value for the
talked folder. Since the folder was replaced with a list we can't use the old
value anymore so there's no need to keep a name that's not really suitable
anymore.
Solves FS#12634.
Change-Id: I8db2a536409b94c45f28db9418a11f11f57dfacb
Currently it's not possible to pass multiple folders for talking. Show the
folder to talk to give a useful feedback when calling it multiple times.
Change-Id: I0f3d1014ee3867cc81122e485fc36353ec0f55ff
As with espeak, a string starting with - is wrongly interpreted as command line
option. Explicitly end options using -- to fix this.
Change-Id: I47b2f1c4ba236638b1f625e5bcf3262f47071c9c
If the Rockbox installation has voice strings included use them when generating
voice files. Fall back to querying the server if no voice strings are found or
the found strings are incompatible.
Change-Id: I9883829ab1757e55b1da9a434221a8dbfc702dd4
When calling espeak via command line explicitly indicate the end of options.
Fixes the voice string "-inf" getting recognized as unrecognized command line
option, breaking speaking.
Change-Id: I4d1be2e6c8ae23a72028919593c5a94990333a9c
mkimxboot requires passing a structure which got extended with another field.
This wasn't adjusted in Rockbox Utility, causing an out of bound access to an
array, which results in a segfault.
Change-Id: I0252849ed0b41f1d8804537c053debc9b0ecd08d
Make hardcoded format version a parameter to allow adjusting depending on the
installed Rockbox version. Rockbox Utility will read the version from the
installed version. Since the command line voicefont tool is only intended for
use in the current tree it uses a fixed version.
Change-Id: I1ec935d47c71961e93b3c6bc6c5d816cd9fc83ff
The server now provides a single build-info file (instead of two separate ones
for development builds and stable releases). Update to use the new file, since
it simplifies things.
Change-Id: If3b949f4d78eecb54e47622da887f51005f6d155
Folders in a zip file usually but not necessarily have their filename ending
with a slash. In these cases recognizing a folder entry by the last character
fails. Check the external attributes as well, which also contain the FAT file
attributes.
Change-Id: I81b039b3774b803b2b528bc83846aafd208e5571
Instead of using the date the voice file was created use the version of Rockbox
the voice file was created for. That way it is possible to see from the
installation log if the installed voice matches the current Rockbox version.
Change-Id: I9fd7d40d718febafbc20579f049b9b94cfa5d573
Instead of using some arbitrary and not really useful string use the timestamp
of the downloaded file if version string is provided by the caller. This also
makes it possible to check if the downloaded file is actually a different one.
Use it for manual and game file downloads, as this gives more reasonable values
than using the date transmitted for daily (archived) build and as support for
archived builds will be removed shortly.
Change-Id: I0c751fabe7bb516edca93a5f73f077a611d4ef87
Instead of showing the internal language names show some more human friendly
string. Currently only applies to the voice creation dialog, the language
configuration dialog needs further adjustments to support display strings
differing from values.
Change-Id: Ic94838f1079c1d09a666d7dbd9682c577f686b3f
Since Rockbox Utility could only install the most recent "daily build" there is
not much difference to the most recent development build so the option was not
really useful.
Additionally update naming. Former "daily" builds are now "archived builds" and
can get installed manually (if necessary), and "current" builds are renamed to
"development build".
Change-Id: I748688d544b6d9868f7495f30933637bf9ff5e50
An empty path is not resolvable, so immediately return an empty result. Fixes
an empty path resolve to "/" on Linux / OS X.
Change-Id: I22c26a7716becbf46850a04e18ee581084546263
When requesting an original firmware file from the user set the filter for the
file chooser dialog to only show files with matching file extension to simplify
selection. Allow the user to select "all files" in case the file for whatever
reason has the wrong extension.
Change-Id: Ic3643c3601f6d849e6563f8753ae80a168ec0a45
Create a BootloaderInstallHelper class for handling post installation hints and
creating the installation instance depending on the player model. This removes
the base class handling its derived classes which always has been weird, and
removes the need to change the base class when adding a new installation
method, since the base shouldn't be affected.
Change-Id: I2a156d70fd1cff6c48bdd46d10c33d75c953ea90
As for BootloaderInstallFile check if copying the bootloader file to the player
did actually work or if an already present file caused the copy operation to
fail.
Change-Id: I2e889610b4cb9f57f73cffc473c6230be0d11e24
QFile::copy() doesn't overwrite an already existing file. This can lead to
bootloader installation trying to place a new file on the player but failing to
do the actual copy if the file already exists. Since overwriting an already
existing file might be unexpected by the user error out in this case and notify
the user.
Change-Id: I5ffaf2f1344271ea2bad9e3232234826552385ec
Some language files have the < and > characters the original string (like "<All
tracks>") has included in the voice strings. These characters cause the
generated wave file to not contain any samples with SAPI, causing an error when
Rockbox Utility tries to encode the file.
Since those characters don't make much sense in the voice string remove them
prior to speaking. Currently affected languages are basque, chinese-simp, and
russian, for which this fixes voicefile creation.
Change-Id: Iac7ccd7921ccfb5ddc33645239a1f8f7e639e5aa
Show an error if copying the firmware file to the player failed. Also, check if
there is already a firmware file present on the player. If so abort and tell
the user about it, since QFile::copy() doesn't overwrite existing files and the
user might not expect the file to get overwritten.
Change-Id: Ie63963289965900a4ab519ddf128246f89d81c6c
Retrieve the encoder settings only when creating the object or when saving.
Avoids unnecessary overhead by accessing the settings object on each encoder
call, which also clutters the system trace log.
Change-Id: If64e5d1d5ac8f1d4b0afd1bc4851e455fc7e64c2
Instead of skipping empty voice strings when trying to voice the list of
strings drop them immediately when building the list of strings.
Change-Id: Ib2627fb4b5061916cf04d67b6b78f457122ed2cd
On Windows espeak installs itself as command line program as well as as SAPI
voice. Using the SAPI voice is simpler, so there is no need to keep the command
line option for it.
Change-Id: I44fbd806572d5c14b976aa5d58a91935f04c6338
Some git revisions are falsely detected as release version. Extend test and fix
the wrong regexp. Corrects font download trying to get the wrong file for some
current builds.
Change-Id: Ia779896c927385ec0d7ba68ee3d953f3c6e4494c
Wait for the process to signal new data available instead of polling its
output. Fixes synchronisation issues with sapi_voice.vbs that were causing
FS#12595.
Change-Id: I86e844e837ed20f32005fdccf7ec9e8c1efbe983
With the transition to git the assumption of the version starting with "r"
isn't true anymore for non-release builds. This caused the wrong strings to be
used when constructing various download URLs.
Remove the test binary which was never intended to be added and fix some
warnings in the test implementation.
Change-Id: I879fdff201cb85f3c89cca73ab6a0514edb5a2df
This allows testing the class by using temporary files without the need of
constructing a special path.
Change-Id: Id5ccd37f05219f246b9bf9f8a26ec81342654f89
Fixes a crash when leaving the encoder settings dialog with the Ok button but
the dynamically loaded library missing, in which case no settings will be
available.
Change-Id: I889a0bbcde6bed2df658b5df57341edf6802daad
The configuration values for executable based TTS systems is stored in member
variables. Instead of reading them multiple times provide a function for that
and move searching the executable to the loading function.
Previously the executable was only searched in the path when opening the TTS
configuration. Having this in the loading function removes that unnecessary
step in case the TTS is in the path (and doesn't require additional
configuration).
Change-Id: I06799b55545dcb719ee3c916795b20e01c248a15